Research on design method of inertial interference self-compensating balance

This paper proposes a design method for a wind tunnel balance that can compensate for inertial interference, aiming to address the issue of short effective time in pulse wind tunnels. This method also tackles the problem of the force measuring system’s inability to dampen quickly and the coupling of inertia vibration signals with the output signal of the balance, which affects aerodynamic measurement accuracy. The method calculates vibration displacement at specific positions of the balance structure using its acceleration, constructs compensation signals based on the relationship between these displacements and balance outputs, and then superimposes them onto the balance signal for compensation. The effectiveness of this compensation method is evaluated through finite element simulations and wind tunnel tests. The results demonstrate that by compensating for the balance signal, there is a significant reduction in the amplitude of the inertia vibration signal, leading to an enhancement in the repeatability accuracy of the measurement. This compensation method effectively solves under-compensation or over-compensation issues when accelerometers are placed on complex models with various modes, where obtaining accurate compensation signals becomes challenging. It provides a new technical approach to improve aerodynamic measurement accuracy by mitigating inertial interference during pulse wind tunnel testing.