Effects of Ti3SiC2 content on the tribological and mechanical properties of spark plasma sintered Al–Si/Ti3SiC2 composites
Source abstract
Abstract
Al–Si/Ti3SiC2 composites with (10–40 wt. %) Ti3SiC2 content have been successfully fabricated by the spark plasma sintering method. The mechanical properties and wear behaviors of Al–Si/Ti3SiC2 composites have been investigated. The results revealed that the compressive and tribological performance of the composites was enhanced by adding Ti3SiC2 particles. The compressive strength was increased from 473 to 563 MPa. The optimal friction coefficient was 0.35.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · MXene and MAX Phase Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Physics Teaching and Experiment Center, Shenzhen Technology University , Shenzhen 518118, China
Funding
Shenzhen Technology University
References (21)
Show source-provided references
1. Effect of addition of 3% Al2O3 on mechanical and microstructural properties in Al-16Si hypereutectic alloys with pouring temperature10.1016/j.matpr.2022.03.517 ↗
2. Effects of size and oxidation treatment for SiC particles on the microstructures and mechanical properties of SiCp/Al composites prepared by powder metallurgy10.1016/j.msea.2022.143664 ↗
3. Effect of Ta, Nb and Zr additions on the microstructures and mechanical properties of 70vol% TiC/Al cermets10.1016/j.ceramint.2022.07.194 ↗
4. Tensile property and fracture mechanism of a neutron absorbing B4Cp/Al composite at elevated temperatures10.1016/j.msea.2022.143300 ↗
5. Correlation between tensile properties, microstructure, and processing routes of an Al–Cu–Mg–Ag–TiB2 (A205) alloy: Additive manufacturing and casting10.1016/j.msea.2022.142989 ↗
6. Mo-enhanced chemical stability of TiC nanoparticles in molten Al10.1016/j.jallcom.2020.158169 ↗
7. Enhancing mechanical properties of uniformly distributed nano TiB2/2024 Al composite rolling sheet by pre-stretch aging10.1016/j.jallcom.2022.165172 ↗
8. Synthesis and characterization of in-situ (Al–Al3Ti–Al2O3)/Al dual matrix composite10.1016/j.jallcom.2020.155745 ↗
9. Mechanical properties and failure mechanism of 3D needle-punched Cf/SiC–Al composites10.1016/j.ceramint.2021.08.259 ↗
10. Oxidation behavior and mechanism of directional order two-scale lamellar porous Ti3SiC2 compound10.1016/j.jallcom.2022.166998 ↗
11. Evaluation of properties of spark plasma sintered Ti3SiC2 and Ti3SiC2/SiC composites10.1016/j.ceramint.2019.03.144 ↗
12. Preparation and properties of Ti3SiC2 preform reinforced SiC ceramic matrix composites10.1016/j.jeurceramsoc.2023.02.024 ↗
13. Exploring processing, reactivity and performance of novel MAX phase/ultra-high temperature ceramic composites: The case study of Ti3SiC210.1016/j.jeurceramsoc.2021.05.029 ↗
14. Friction and wear behavior of polytetrafluoroethene composites filled with Ti3SiC210.1016/j.matdes.2014.04.069 ↗
15. Influence of Ti3AlC2 content and load on the tribological behaviors of Ti3AlC2p/Al composites10.1016/j.ceramint.2021.09.254 ↗
16. Investigation on the wear resistance and mechanical properties of Al/Ti3SiC2 composites fabricated by the spark plasma sintering10.1016/j.mtcomm.2021.102270 ↗
17. Fabrication of Al2O3–Al composites by infiltration method and their characteristic10.1016/j.jmatprotec.2005.04.046 ↗
18. Effect of WC nanoparticles content on the microstructure, hardness and tribological properties of Al-WC nanocomposites produced by flake powder metallurgy10.1016/j.matchemphys.2022.127252 ↗
19. Wear characteristics of Al matrix reinforced with Al2O3-carbon hybrid metal matrix composites10.1016/j.matpr.2020.05.739 ↗
20. Enhanced hardness and wear resistance of Al-based hybrid MMCs by using of composite metal boride reinforcement particles10.1016/j.matchemphys.2022.126377 ↗
21. Fretting wear behaviors of Zr-4 alloy under different ions irradiation conditions10.1016/j.triboint.2020.106553 ↗