Structure optimal design of 500 kV dry-type air-core shunt reactor based on response surface method
Source abstract
Abstract
The hotspot temperature of the reactor is one of the important indices in reactor design, and the appropriate hotspot value can ensure that the reactor will not overheat failure and threaten the safety of the power system. In this paper, the temperature field simulation model of a 500 kV dry-type air-core shunt reactor is established, and the hotspot temperature of the reactor is obtained by COMSOL software. Then, the radial basis function response surface function is used to construct the response surface function of the hotspot temperature and its related variables, and the applicability of the response surface function is tested to analyze the rationality and accuracy of the response surface function. Finally, the optimal solution of the response surface function under the coordination of variables and related constraints is obtained by using the constrained simulated annealing algorithm. The results show that the hotspot temperature of the reactor envelope winding decreases obviously after optimization.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Voltage Power Transmission Systems · Engineering Applied Research · Electromagnetic Simulation and Numerical Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Hebei Provincial Key Laboratory of Power Transmission Equipment Security Defense, North China Electric Power University 1 , Baoding 071003,
Power Grid Environmental Protection National Key Laboratory, China Electricity Research Institute Co., Ltd. 2 , Wuhan 430074,
Beijing Electric Technology Co., Ltd. 3 , Beijing 102600,
Funding
State Grid Corporation Technology Project
References (20)
Show source-provided references
1. Simulation research on temperature field of large-capacity dry hollow shunt reactor based on multi-physical field coupling10.13296/j.1001-1609.hva.2024.08.015 ↗
2. Coupling calculation and analysis of temperature field for overheat faults in dry-type hollow parallel reactors10.14188/j.1671-8844.2018-05-011 ↗
3. Research on temperature field of large-capacity stacked reactor based on finite element analysis10.13296/j.1001-1609.hva.2022.08.033 ↗
4. Temperature field calculation and test analysis of dry hollow reactor10.19595/j.cnki.1000-6753.tces.2017.03.025 ↗
5. Simulation analysis of thermal network model of dry transformer considering fluid dynamics10.19595/j.cnki.1000-6753.tces.210675 ↗
6. Coordinated optimization of sub-synchronous oscillation parameters of doubly-fed fan system based on Sobol impedance sensitivity analysis10.13336/j.1003-6520.hve.20220766 ↗
7. Multi-objective dynamic reactive power optimization of active distribution Network based on adaptive particle swarm optimization algorithm10.19635/j.cnki.csu-epsa.000055 ↗
8. Optimization design of high-power high-frequency transformer based on multi-objective genetic algorithm10.13334/j.0258-8013.pcsee.171776 ↗
9. Response surface experimentation10.1111/j.1745-4549.1982.tb00650.x ↗
10. On the experimental attainment of optimum conditions10.1111/j.2517-6161.1951.tb00067.x ↗
11. Global optimization of stochastic black-box systems via sequential kriging meta-models10.1007/s10898-005-2454-3 ↗
12. Multiquadric equations of topography and other irregular surfaces10.1029/jb076i008p01905 ↗
13. Parameter optimization design of transverse flux induction heating device based on multi-island genetic algorithm and response surface method10.19595/j.cnki.1000-6753.tces.230429 ↗
14. A two-dimensional transient fluid-thermal coupling method for temperature rising calculation of transformer winding based on finite element method10.1063/1.5141130 ↗
15. Research on the mechanism of interturn insulation damage in dry air core reactors based on temperature field10.13296/j.1001-1609.hva.2022.04.013 ↗
16. Adaptive impedance matching method for multi-load radio energy transmission systems based on radial basis neural networks10.19595/j.cnki.1000-6753.tces.L90268 ↗
17. Optimization design of transformer electrostatic ring structure based on improved continuous local enumeration sampling and radial basis function response surface method10.19595/j.cnki.1000-6753.tces.221608 ↗
18. Halbach linear generator based on simulated annealing algorithm to optimize the design10.19595/j.cnki.1000-6753.tces.200442 ↗
19. Parameter identification based on modified simulated annealing differential evolution algorithm for giant magnetostrictive actuator10.1063/1.5009956 ↗
20. Aluminum nitride coatings using response surface methodology to optimize the thermal dissipated performance of light-emitting diode modules10.1063/1.5021816 ↗