Precise evaluation of the material constants of [011]-poled mangan-doped 0.32Pb(In1/2Nb1/2)O3-0.39Pb(Mg1/3Nb2/3)O3-0.29PbTiO3 single crystals

Recently, there has been a surge of interest in [011]-poled Mn: PIN-PMN-PT piezoelectric single crystals for high-power transducers. These crystals boast impressive electromechanical coupling coefficients, piezoelectric constants in the transverse mode, and excellent heat resistance due to their high mechanical quality factor. To effectively design transducers using these crystals, understanding their material constants is crucial. Our study focused on determining these constants by employing the resonance method. We created eleven different resonators, analyzed their impedance spectra, and derived seventeen elastic compliance, piezoelectric, and dielectric constants. The precision of the obtained material constants was enhanced by minimizing the difference between the impedance spectra found through finite element analyses and actual measurements of each resonator. The accuracy of these derived constants was validated by comparing the impedance spectra obtained from analysis with those measured experimentally. This novel approach demonstrated a capability to derive more precise material constants than prior studies. These refined material constants hold the potential to enable more precise and effective design of acoustic transducers constructed from the single crystals.