Design of a point-focusing lens antenna based on 3D printing for a small-area plasma

The interaction mechanism between plasmas and electromagnetic waves has not been fully defined, and experiments are helpful for investigating the mechanism and verifying the theoretical analysis. This paper proposes a point-focusing lens antenna based on three-dimensional (3D) printing technology for the experimental study of the interaction between electromagnetic waves and a small-area plasma. First, CST simulation software was used for the simulation design of the horn antenna and focusing lens. Subsequently, 3D printing technology was used to print the lens combined with the horn antenna for experimental verification of the focusing performance. Finally, an electromagnetic wave passing through a plasma was experimentally investigated, and it was mutually verified with the propagation theory of electromagnetic waves in plasmas. The experimental and theoretical data indicated that the 3D-printed point-focusing lens antenna exhibited a good focusing effect on electromagnetic waves. This method may be used by employing a variety of materials and designs, thereby considerably improving the detection of small-area plasma. It may also solve the issue of the radial diffraction effect of narrow cylindrical plasma generated by inductively coupled plasma-generation equipment and reduce the error associated with experimental data. Therefore, this method may be useful for plasma propagation measurement, plasma-environment diffraction analysis, and parameter inversion of complex plasma environments.