Numerical analysis of impingement characteristics of supercooled large droplets on the surface of a rotating hood

The authors of this study numerically analyze the characteristics of impingement of supercooled large droplets on the surface of the rotating hood of an aircraft. We use the secondary development function of Fluent software to first compare the prevalent models of impinging supercooled large droplets and then develop a modified model to numerically simulate their characteristics of impingement on the surface of a rotating hood in order to examine the effects of the diameter of the droplets, the speed of rotation, and the corresponding velocity of inflow on them. The results showed that the efficiency of the loss of mass of the droplets caused by their splashing and rebounding was low on the top of the cone, while the efficiency of local droplet collection was the highest. The efficiency of mass loss quickly increased, while that of droplet collection sharply decreased in the area of transition from the top to the side. The efficiencies of mass loss and droplet collection were nearly constant on the side of the cone, while that of the latter decreased to zero on the tail of the cone. When the median volumetric diameter of the droplets was increased from 79 to 250 µm, the efficiency of the loss of mass increased by about 15% on the side of the cone, but that of local droplet collection changed only slightly. The efficiency of the loss of mass decreased by about 20%, while that of local droplet collection increased by about 2.6% on the top of the cone under this condition. When the speed of rotation was increased from 1200 to 4300 r/min and the corresponding velocity of inflow was increased from 30 to 140 m/s, the efficiency of mass loss increased by about 15% on the side of the cone, while that of local droplet collection changed little. The efficiency of mass loss on the top of the cone decreased by about 37.5%, while that of local droplet collection increased by about 8% in this case.