Direct numerical simulation and mode analysis of turbulent transition flow in a compressor blade channel

The separation and turbulent transition of the flow in a compressor blade channel are investigated through direct numerical simulations (DNS) at a Reynolds number of 1.367 × 105. Based on the original DNS data, both time-averaged statistics and instantaneous vortex structures of the flow field are extensively analyzed. The vortices are visualized and studied by the Liutex method, and the streaming dynamic mode decomposition (SDMD), a low-storage variant of conventional DMD, is applied to the large datasets obtained on both pressure and suction sides. The physical quantity analyzed with SDMD is the Liutex magnitude R. The DNS results indicate that flow separation occurs on both sides of the blade. On the pressure surface, the separation is weak and the flow remains in a natural transition dominated by viscous Tollmien–Schlichting instabilities. In contrast, owing to the presence of a large laminar separation bubble, the flow experiences a separation transition governed by inviscid Kelvin–Helmholtz instabilities on the suction surface. The SDMD results suggest that a broad range of vortex frequencies exist in the transition flow, and the scale of the spatial structures is negatively correlated with the frequency of the mode. On the pressure surface, the extracted SDMD modes are primarily related to Kelvin–Helmholtz rolls, whereas on the suction side, influenced by the separated boundary layer, the modal structures exhibit greater diversity.