Study on the discharge characteristics along the surface of insulating media in the low air pressure and strong airflow environment
Source abstract
Abstract
In this paper, a surface discharge test was conducted on a silicone rubber insulating sheet, an epoxy resin insulating sheet, a porcelain insulating sheet, and a glass insulating sheet by using an independently constructed test platform of insulating media to study the discharge characteristics along the surface of insulating media under low air pressure and strong airflow environment. Experiments were conducted to obtain the variation in the discharge characteristics along the surface of the four kinds of insulation media with respect to airflow velocity at different air pressures. The discharge voltage characteristics and discharge morphology characteristics along the surface of the insulating media in a strong airflow environment at low air pressure are elucidated. This paper provides theoretical support for the selection of insulation materials and insulation protection design for a low air pressure and strong airflow environment.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High voltage insulation and dielectric phenomena · Aerosol Filtration and Electrostatic Precipitation · Power Transformer Diagnostics and Insulation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Electrical Engineering, Southwest Jiaotong University , Chengdu 611756, China
Funding
National Natural Science Foundation of China · Sichuan Outstanding Young Scientist Project · National Rail Transportation Electrification and Automation Engineering
References (29)
Show source-provided references
1. Study of DC partial discharge on dielectric surfaces: Mechanism, patterns and similarities to AC10.1016/j.ijepes.2020.106600 ↗
2. Progression of positive corona on cylindrical insulating surfaces Part II: Effects of profile on corona10.1109/tdei.2008.4483457 ↗
3. Breakdown path and condition of air-insulated rod–plane gap with polymeric barrier inserted under alternating voltages10.1063/1.5119169 ↗
4. Dynamic behaviors and charge characteristics of droplet in a vertical electric field before bouncing10.1016/j.expthermflusci.2020.110213 ↗
5. Verification and analysis of flowing gas discharge—Part II10.1109/tdei.2019.007833 ↗
6. Modeling of flowing gas discharge—Part I10.1109/tdei.2019.007832 ↗
7. The study of negative needle-to-plane corona discharge with photoionization under various air pressures10.1063/5.0056879 ↗
8. Characteristics of creeping discharge caused by a needle electrode in oil-pressboard insulation under +DC voltage10.1109/tdei.2020.009157 ↗
9. Experimental study for momentum transfer in a dielectric barrier discharge plasma actuator10.2514/1.30985 ↗
10. Partial discharges at DC voltage: Their mechanism, detection and analysis10.1109/tdei.2005.1430401 ↗
11. Statistical analysis on the DC discharge path of ice-covered insulators under natural conditions10.1016/j.ijepes.2021.106961 ↗
12. Effect of trace SF6 on negative corona characteristics in SF6/N2 gas mixtures under DC voltages10.1063/5.0013024 ↗
13. Plasma model of discharge along a dielectric surface in N2/O2 mixtures10.1063/1.4949767 ↗
14. Effect of electric fields on contact angle and surface tension of drops10.1016/j.jcis.2004.08.134 ↗
15. Breakdown characteristics and mechanisms of short needle-plate air gap in high-speed airflow10.1109/tps.2017.2737043 ↗
16. Two-dimensional simulation of an Ar/H2 direct-current discharge plasma10.1063/5.0049041 ↗
17. Characteristics of streamer propagation along the insulation surface: Influence of dielectric material10.1109/tdei.2015.7076822 ↗
18. Contamination deposition and discharge characteristics of outdoor insulators in fog-haze conditions10.1016/j.ijepes.2020.106176 ↗
19. Flashover characteristics of cylindrical insulator in high-speed sand environment10.1109/tdei.2016.006014 ↗
20. Large low-field positive magnetoresistance innonmagnetic half-Heusler ScPtBi single crystal10.1063/1.4936179 ↗
21. Partial discharge breakdown characteristics under needle-plate defect configuration10.1063/5.0039493 ↗
22. Effects of wind condition on hydrophobicity behavior of silicone rubber in corona discharge environment10.1109/tdei.2015.005463 ↗
23. Transient electric field and space charge behavior for unipolar ion conduction10.1063/1.1663610 ↗
24. The development of dielectric barrier discharges in gas gaps and on surfaces10.1088/0022-3727/33/20/315 ↗
25. Influence of rate of voltage rise on positive leader inception in long-air-gap discharge10.1063/5.0072072 ↗
26. Spectral characteristics of a short glow discharge with a grid anode10.1063/5.0082889 ↗
27. Two-dimensional simulation of spatiotemporal generation of dielectric barrier columnar discharges in atmospheric helium10.1063/1.4937794 ↗
28. Numerical modeling of electrical discharges in long air gaps tested with positive switching impulses10.1109/tps.2018.2802039 ↗
29. On the critical charge required for positive leader inception in long air gaps10.1088/1361-6463/aa9fa6 ↗