Arc-extinguishing characteristics of semi-enclosed structures based on theory of positive shock wave reflection

Lightning current in the process of discharge can cause the potential differences between insulators to rise, hindering the normal operation of the equipment. To reduce the potential difference between insulators during a lightning strike, this study proposes a semi-enclosed structure to limit the rise of potential between insulators. Lightning-induced overvoltage causes the semi-enclosed structure to discharge, forming an arc channel. Because the arc is compressed by the structure, an overpressure-induced shock wave is generated. Positive reflection occurs when the shock wave hits the wall that damages the development of the arc through superposition. By using the theory of positive reflection of shock waves, the overpressure due to a positively reflected wave, generated by an impulse current of 8/20 µs with a peak value of 10 kA, was as high as 4.8 MPa, 48 times the initial pressure. Moreover, a 3D high-current impulse discharge model was established in COMSOL to simulate the process of shock discharge of the structure in the case of a large current. Finally, current-induced shock tests were carried out in the semi-enclosed structure. The results show that the maximum pressure in the semi-enclosed structure was 4.38 MPa at 10 µs and conductivity dropped to zero at 80 µs. In experiments, the amplitude of the impulse current decreased from 9.54 to 5.72 kA, and the current dropped to zero at about 65 µs. The results show that the semi-enclosed structure can extinguish the arc and limit the rise of potential between insulators.