journal article·2022-11-01Open access

A review on the active thermal management researches of epidermal electronic devices

Yun Cui, Haochi Zhang, Zhao Zhao, Yingli Shi

AIP Advances· Volume 12· Issue 11

Abstract

As a representative of flexible electronics, epidermal electronic devices (EEDs) are extremely suitable for integration with biological tissues, such as human epidermis benefiting from the advantages of ultrathin, stretchability, and perfectly conformal attachment. Considering the low thermal conductivity of the EEDs polymer material, a large amount of undesired heat accumulation is prone to occur at the EEDs/skin interface, which brings challenges to the thermal management of the EEDs/skin system. The sharp temperature increment caused by ungratified heat dissipation will lead to thermal comfort issues, such as damage to biological tissues and also device failure, which will limit the application and promotion of EEDs to a large extent. A growing quantity of interesting and fruitful literature are addressing this conundrum. In this review, we comb and review the research of EEDs active thermal management, which mainly summarizes the strategies of heat flow regulation, phase change energy storage, and heating mode design. This review aims to provide the overall advances and reference source for future innovative research directions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Thermal Radiation and Cooling Technologies · Advanced Thermoelectric Materials and Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Aviation Industry Development Research Center of China 1 , Beijing 100029, China

China Special Equipment Inspection and Research Institute 2 , Beijing 100029, China

School of Materials and Energy, University of Electronic Science and Technology of China (USETC) 3 , Chengdu 610054, China

Funding

Aviation Industry Corporation of China

References (87)

Show source-provided references
1. Epidermal electronics10.1126/science.1206157 ↗
2. Ultrathin conformal devices of precise and continuous thermal characterization of human skin10.1038/nmat3755 ↗
3. Epidermal photonic devices for quantitative imaging of temperature and thermal transport characteristics of the skin10.1038/ncomms5938 ↗
4. Theoretical and experimental studies of epidermal heat flux sensors for measurements of core body temperature10.1002/adhm.201500110 ↗
5. A wearable strain sensor based on a carbonized nano-sponge/silicone composite for human motion detection10.1039/c7nr01011g ↗
6. A non-invasive multichannel hybrid fiber-optic sensor system for vital sign monitoring10.3390/s17010111 ↗
7. Epidermal inorganic optoelectronics for blood oxygen measurement10.1002/adhm.201601013 ↗
8. User-interactive electronic skin for instantaneous pressure visualization10.1038/nmat3711 ↗
9. Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes10.1038/nnano.2011.184 ↗
10. Theoretical and experimental study of 2D conformability of stretchable electronics laminated onto skin10.1007/s11431-017-9023-5 ↗
11. Hyper-stretchable self-powered sensors based on electrohydrodynamically printed, self-similar piezoelectric nano/microfibers10.1016/j.nanoen.2017.07.048 ↗
12. Epidermal devices for noninvasive, precise, and continuous mapping of macrovascular and microvascular blood flow10.1126/sciadv.1500701 ↗
13. Capacitive epidermal electronics for electrically safe, long-term electrophysiological measurements10.1002/adhm.201300334 ↗
14. Flexible, foldable, actively multiplexed, high-density electrode array for mapping brain activity in vivo10.1038/nn.2973 ↗
15. An epidermal stimulation and sensing platform for sensorimotor prosthetic control, management of lower back exertion, and electrical muscle activation10.1002/adma.201504155 ↗
16. A system for electrotactile feedback using electronic skin and flexible matrix electrodes: Experimental evaluation10.1109/toh.2016.2618377 ↗
17. Sensory substitution and the human-machine interface10.1016/j.tics.2003.10.013 ↗
18. Restoring natural sensory feedback in real-time bidirectional hand prostheses10.1126/scitranslmed.3006820 ↗
19. Restoring the sense of touch with a prosthetic hand through a brain interface10.1073/pnas.1221113110 ↗
20. Dynamic computational simulations for evaluating tissue loads applied by regulated negative pressure-assisted wound therapy (RNPT) system for treating large wounds10.1016/j.jtv.2017.10.004 ↗
21. Temperature and burn injury prediction of human skin exposed to microwaves: A model analysis10.1007/s00411-011-0364-y ↗
22. Effects of thermal properties and geometrical dimensions on skin burn injuries10.1016/s0305-4179(02)00104-3 ↗
23. One-dimensional thermal analysis of the flexible electronic devices integrated with human skin10.3390/mi7110210 ↗
24. A widely adaptable analytical method for thermal analysis of flexible electronics with complex heat source structures10.1098/rspa.2019.0402 ↗
25. Thermal analysis of the flexible electronics affixed on large curvature myocardium surface10.1016/j.ijheatmasstransfer.2019.118983 ↗
26. Skin pain sensation of epidermal electronic device/skin system considering non-Fourier heat conduction10.1016/j.jmps.2020.103927 ↗
27. Thermal analysis of epidermal electronic devices integrated with human skin considering the effects of interfacial thermal resistance10.1063/1.5029505 ↗
28. Three-dimensional thermal analysis of rectangular micro-scale inorganic light-emitting diodes integrated with human skin10.1016/j.ijthermalsci.2018.02.002 ↗
29. Thermal management of micro-scale inorganic light-emitting diodes on an orthotropic substrate for biointegrated applications10.1038/s41598-017-06798-5 ↗
30. Thermomechanical analysis of epidermal electronic devices integrated with human skin10.1115/1.4037704 ↗
31. Three-dimensional thermomechanical analysis of epidermal electronic devices on human skin10.1016/j.ijsolstr.2019.03.002 ↗
32. Transient thermomechanical analysis of epidermal electronic devices on human skin10.1016/j.mechmat.2019.103097 ↗
33. Sweat effects on the thermal analysis of epidermal electronic devices integrated with human skin10.1016/j.ijheatmasstransfer.2018.07.105 ↗
34. Thermal management of epidermal electronic devices/skin system considering insensible sweating10.1038/s41598-018-32152-4 ↗
35. Thermal management of flexible wearable electronic devices integrated with human skin considering clothing effect10.1016/j.applthermaleng.2018.08.088 ↗
36. A stretchable form of single-crystal silicon for high-performance electronics on rubber substrates10.1126/science.1121401 ↗
37. A hemispherical electronic eye camera based on compressible silicon optoelectronics10.1038/nature07113 ↗
38. Materials and noncoplanar mesh designs for integrated circuits with linear elastic responses to extreme mechanical deformations10.1073/pnas.0807476105 ↗
39. Stretchable batteries with self-similar serpentine interconnects and integrated wireless recharging systems10.1038/ncomms2553 ↗
40. Transfer printing techniques for materials assembly and micro/nanodevice fabrication10.1002/adma.201201386 ↗
41. Enhanced adhesion with pedestal-shaped elastomeric stamps for transfer printing10.1063/1.4706257 ↗
42. Axisymmetric thermo-mechanical analysis of laser-driven non-contact transfer printing10.1007/s10704-012-9744-9 ↗
43. Mechanically stretchable and electrically insulating thermal elastomer composite by liquid alloy droplet embedment10.1038/srep18257 ↗
44. On the potential of Galinstan minichannel and minigap cooling10.1109/tcpmt.2013.2274699 ↗
45. 2009
46. Stretchable and soft electronics using liquid metals10.1002/adma.201606425 ↗
47. High thermal conductivity in soft elastomers with elongated liquid metal inclusions10.1073/pnas.1616377114 ↗
48. A combination of boron nitride nanotubes and cellulose nanofibers for the preparation of a nanocomposite with high thermal conductivity10.1021/acsnano.7b02359 ↗
49. Thin metallic heat sink for interfacial thermal management in biointegrated optoelectronic devices10.1002/admt.201800159 ↗
50. Analytical investigations on the thermal properties of microscale inorganic light-emitting diodes on an orthotropic substrate10.1063/1.4978533 ↗
51. Anisotropic thermal conductive composite by the guided assembly of boron nitride nanosheets for flexible and stretchable electronics10.1002/adfm.201902575 ↗
52. Bio-inspired tunable anisotropic thermal conductivities investigation of periodic lattice composite via external strains10.1063/1.5113857 ↗
53. Geometrical considerations in the control and manipulation of conductive heat flux in multilayered thermal metamaterials10.1063/1.4823455 ↗
54. Anomalous refraction of heat flux in thermal metamaterials10.1063/1.4867027 ↗
55. Experimental evidence for the bending of heat flux in a thermal metamaterial10.1063/1.4894387 ↗
56. Artificial nacre-like papers based on noncovalent functionalized boron nitride nanosheets with excellent mechanical and thermally conductive properties10.1039/c5nr00228a ↗
57. Review on thermal management systems using phase change materials for electronic components, Li-ion batteries and photovoltaic modules10.1016/j.rser.2013.12.017 ↗
58. Preparation, thermal properties and thermal reliability of microencapsulated n-eicosane as novel phase change material for thermal energy storage10.1016/j.enconman.2010.07.047 ↗
59. Polyethylene glycol (PEG)/diatomite composite as a novel form-stable phase change material for thermal energy storage10.1016/j.solmat.2011.01.022 ↗
60. A review of power battery thermal energy management10.1016/j.rser.2011.07.096 ↗
61. Review of heat transfer technologies in electronic equipment10.1115/1.2792113 ↗
62. Thermotrp channels and beyond: Mechanisms of temperature sensation10.1038/nrn1141 ↗
63. Fluidic phase-change materials with continuous latent heat from theoretically tunable ternary metals for efficient thermal management10.1073/pnas.2200223119 ↗
64. Flexible and multifunctional phase change composites featuring high-efficiency electromagnetic interference shielding and thermal management for use in electronic devices10.1016/j.cej.2021.132928 ↗
65. Exploring next-generation functional organic phase change composites10.1002/adfm.202200792 ↗
66. Thermal management and control of wearable devices10.1016/j.isci.2022.104587 ↗
67. Flexible engineering of advanced phase change materials10.1016/j.isci.2022.104226 ↗
68. Functional soft composites as thermal protecting substrates for wearable electronics10.1002/adfm.201905470 ↗
69. Analytical transient phase change heat transfer model of wearable electronics with a thermal protection substrate10.1007/s10483-020-2671-7 ↗
70. Soft, stretchable thermal protective substrates for wearable electronics10.1038/s41528-022-00174-8 ↗
71. A flexible composite phase change material with ultrahigh stretchability for thermal management in wearable electronics10.1007/s10853-021-06290-6 ↗
72. Wide-temperature range thermoregulating e-skin design through a hybrid structure of flexible thermoelectric devices and phase change materials heat sink10.1002/eom2.12253 ↗
73. Temperature-dependent thermal and mechanical properties of flexible functional PDMS/paraffin composites10.1016/j.matdes.2019.108219 ↗
74. Flexible shape-stabilized phase change materials with passive radiative cooling capability for thermal management10.1016/j.cej.2021.131466 ↗
75. An intrinsically flexible phase change film for wearable thermal managements10.1016/j.ensm.2020.10.014 ↗
76. Tuning the flexibility and thermal storage capacity of solid-solid phase change materials towards wearable applications10.1039/c9ta13925g ↗
77. Flexible graphene aerogel-based phase change film for solar-thermal energy conversion and storage in personal thermal management applications10.1016/j.cej.2021.129637 ↗
78. Flexible MXene-coated melamine foam based phase change material composites for integrated solar-thermal energy conversion/storage, shape memory and thermal therapy functions10.1016/j.compositesa.2021.106291 ↗
79. Carbon nanotube bundles assembled flexible hierarchical framework based phase change material composites for thermal energy harvesting and thermotherapy10.1016/j.ensm.2019.12.029 ↗
80. Bioinspired sweating with temperature sensitive hydrogel to passively dissipate heat from high-end wearable electronics10.1016/j.enconman.2018.11.027 ↗
81. Unusual strategies for using indium gallium nitride grown on silicon (111) for solid-state lighting10.1073/pnas.1102650108 ↗
82. Thermal design of rectangular microscale inorganic light-emitting diodes10.1016/j.applthermaleng.2017.05.020 ↗
83. Mechanics-guided design of wearable network heaters for bio-integrated applications10.1115/1.4054345 ↗
84. Thermal analysis on active heat dissipation design with embedded flow channels for flexible electronic devices10.3390/mi12101165 ↗
85. Thermal properties of microscale inorganic light-emitting diodes in a pulsed operation10.1063/1.4800858 ↗
86. High-efficiency, microscale GaN light-emitting diodes and their thermal properties on unusual substrates10.1002/smll.201200382 ↗
87. 3D thermal analysis of rectangular microscale inorganic light-emitting diodes in a pulsed operation10.1088/0022-3727/49/40/405101 ↗