A novel broadband capacitor voltage divider for measurement of ultrafast square high voltage pulse transmitted in transmission line
Source abstract
Abstract
This paper studies a new type of broadband capacitive voltage divider, which is used to measure the high voltage square wave pulse with sub-nanosecond front in a transmission line. The low-frequency characteristics of traditional capacitive dividers are extended by adding sampling resistors, and the high-frequency gain caused by stray capacitors of sampling resistors is eliminated by adding compensation capacitors, which greatly broadens the bandwidth of capacitive dividers. The findings show that when the sampling resistance is 6.1 kΩ and 12 kΩ and the equivalent grounding capacitance is about 15 pF and 30 pF, respectively, the bandwidth of the divider is 180 kHz to 2 GHz and 100 kHz to 2 GHz, which can meet the test requirements of the high voltage square wave pulse with sub-nanosecond front and dozens of nanosecond pulse width.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magneto-Optical Properties and Applications · Magnetic Field Sensors Techniques · Advanced Electrical Measurement Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Pulsed Power, Institute of Fluid Physics, CAEP , P.O. Box 919-108, Mianyang 621999, China
References (11)
Show source-provided references
1. Differential-output B-dot and D-dot monitors for current and voltage measurements on a 20-MA, 3-MV pulsed-power accelerator10.1103/physrevstab.11.100401 ↗
2. Design, calibration, and performance of water diagnostics on the PBFA Z
3. B-dot and D-dot sensors for (sub)nanosecond high-voltage and high-current pulse measurements10.1109/jsen.2016.2530841 ↗
4. Measurement and calculation of surge-arrester residual voltages10.1016/j.measurement.2011.08.021 ↗
5. A compact capacitive probe for high-voltage diagnostic in Z-pinches10.1063/1.4797460 ↗
6. High-voltage subnanosecond pulsed power source with repetitive frequency based on Marx structure10.1109/tdei.2015.004966 ↗
7. Capacitance voltage divider for high-voltage pulse measurement10.1063/1.1136644 ↗
8. Electrooptic measurement of 500-kV pulsed voltages10.1109/tps.2002.805322 ↗
9. A simple nanosecond capacitive voltage divider10.1063/1.1138170 ↗
10. High frequency high voltage probe embedded into an extremely low inductivity high voltage supply connection
11. D-dot monitor for sub-nanosecond high voltage pulse measurement10.3788/hplpb20122406.1497 ↗