Treeing phenomenon of thermoplastic polyethylene blends for recyclable cable insulation materials
Source abstract
Abstract
Owing to its good recyclability and low processing energy consumption, non-crosslinked polyethylene blends (e.g. LLDPE-HDPE blends) are considered as one of potential environmental-friendly substitutions for crosslinked polyethylene (XLPE) as cable insulation material. Although extensive work has been performed for measuring the basic dielectric properties, there is a lack of the investigations on the aging properties for such a material system, which hinders the evaluation of reliability and lifetime of the material for cable insulation. In this paper, we study the electric aging phenomenon of 0.7LLDPE-0.3HDPE blending material by investigating the treeing behavior, and its comparison with XLPE and LLDPE. Treeing tests show that the 0.7LLDPE-0.3HDPE blends have lower probability for treeing as well as smaller treeing dimensions. Further thermal analysis and microstructure study results suggest that the blends exhibit larger proportion of thick lamellae and higher crystallinity with homogeneously-distributed amorphous region, which is responsible for good anti-treeing performance. Our finding provides the evidence that the 0.7LLDPE-0.3HDPE blends exhibits better electric-aging-retardance properties than XLPE, which may result in a potential application for cable insulation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High voltage insulation and dielectric phenomena · Dielectric materials and actuators · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Xi’an Jiaotong University 1 State Key Laboratory of Electrical Insulation and Power Equipment, , Xi’an, China
Electric Power Research Institute of China Southern Grid 2 , Guangzhou, China
Funding
Electric Power Research Institute of China Southern Grid · The National Key Research and Development program of China
References (27)
Show source-provided references
1. 2011
2. . 2011 · 6
3. . 2012 · 26
4. J. Mater. Sci. · 1997 · 32 · 452310.1023/a:1018617200285 ↗
5. J. Polym. Sci. Pol. Phys. · 2000 · 38 · 230010.1002/1099-0488(20000901)38:17<2309::aid-polb110>3.3.co;2-z ↗
6. . 2011 · 22
7. IEEE Trans. Dielectr. Electr. Insul. · 2013 · 20 · 110.1109/tdei.2013.6451335 ↗
8. . 2015
9. J. of Mater. Sci. · 2011 · 46 · 405810.1007/s10853-011-5335-9 ↗
10. IEEE Trans. Dielectr. Electr. Insul. · 2015 · 22 · 63910.1109/tdei.2015.7076758 ↗
11. . 2015
12. . 2015
13. . 2015
14. IEEE Electr. Insul. M. · 2010 · 26 · 3310.1109/mei.2010.5511187 ↗
15. J. Appl. Phys. · 2005 · 97 · 08371310.1063/1.1868880 ↗
16. J. Appl. Phys. · 2010 · 108 · 03411010.1063/1.3359713 ↗
17. J. Appl. Phys. · 2005 · 98 · 03410210.1063/1.1978986 ↗
18. IEEE Trans. Dielectr. Electr. Insul. · 2001 · 8 · 7810.1109/94.910428 ↗
19. IEEE Trans. Dielectr. Electr. Insul. · 2001 · 8 · 11110.1109/94.910433 ↗
20. IEEE Trans. Dielectr. Electr. Insul. · 1997 · 4 · 5210.1109/94.590866 ↗
21. IEEE Trans. Dielectr. Electr. Insul. · 1998 · 5 · 70710.1109/94.729693 ↗
22. Dielectr. Electr. Insul. · 2010 · 17 · 150910.1109/tdei.2010.5595552 ↗
23. 2016 · 48
24. Polym. Bull. · 1997 · 39 · 46510.1007/s002890050174 ↗
25. Polymer · 2011 · 52 · 56410.1016/j.polymer.2010.12.008 ↗
26. IEEE Trans. Dielectr. Electr. Insul. · 2002 · 9 · 48310.1109/tdei.2002.1024425 ↗
27. Dielectr. Electr. Insul. · 1998 · 5 · 55810.1109/94.708273 ↗