A communication-free WPT system based on transmitter-side hybrid topology switching for battery charging applications
Source abstract
Abstract
A communication-free wireless power transfer system based on transmitter-side hybrid topology switching for various battery charging applications is proposed in this paper. The method realizes the stable and reliable constant current (CC) and constant voltage (CV) outputs by the inherent characteristics of the designed hybrid topology. Besides, the zero phase angle condition can be obtained, which enhances the power transmission capability and improves system efficiency. The transition point from the CC to CV charging mode is determined by the battery charging voltage, which is estimated in real-time by measuring the root-mean-square value of high-frequency inverter output current. Then, the whole charging process can be operated by the transmitter-side controller; hence, the receiver-side controller is unnecessary. The advantages are that wireless communication links for real-time feedback of charging parameters between the transmitter and receiver are avoided, sophisticated control strategies are no longer required, and a lightweight, miniaturized, and compact receiver is guaranteed. Finally, to verify the effectiveness and practicability of the proposed approach, a confirmatory experimental setup with 80 V charging voltage and 5 A charging current is constructed. The experimental results match the theoretical analysis.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Wireless Power Transfer Systems · Energy Harvesting in Wireless Networks · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Electrical Engineering and Automation, Wuhan University , No.8, South Donghu Road, Wuchang District, Wuhan 430072, China
References (35)
Show source-provided references
1. Development of 1-MW inductive power transfer system for a high-speed train10.1109/tie.2015.2417122 ↗
2. Implementation of the constant current and constant voltage charge of inductive power transfer systems with the double-sided LCC compensation topology for electric vehicle battery charge applications10.1109/tpel.2017.2766605 ↗
3. Experimental study on asymmetric wireless power transfer system for electric vehicle considering ferrous chassis10.1109/tte.2016.2638641 ↗
4. Design of a high-efficiency wireless power transfer system with intermediate coils for the on-board chargers of electric vehicles10.1109/tpel.2017.2662067 ↗
5. New concept of an electromagnetic usage for contactless communication and power transmission in the ocean
6. Planar wireless charging technology for portable electronic products and Qi10.1109/jproc.2013.2246531 ↗
7. An LCC-C compensated wireless charging system for implantable cardiac pacemakers: Theory, experiment, and safety evaluation10.1109/tpel.2017.2735441 ↗
8. A frequency control method for regulating wireless power to implantable devices10.1109/tbcas.2008.918284 ↗
9. Wireless power transmission with self-regulated output voltage for biomedical implant10.1109/tie.2013.2273472 ↗
10. Contactless power delivery system for mining applications10.1109/28.363053 ↗
11. The inductive power transfer story at the university of Auckland10.1109/mcas.2015.2418972 ↗
12. Resonant wireless charging system design for 110-kV high-voltage transmission line monitoring equipment10.1109/tie.2018.2808904 ↗
13. Hybrid IPT topologies with constant current or constant voltage output for battery charging applications10.1109/tpel.2015.2396471 ↗
14. A high efficiency 5 kW inductive charger for EVs using dual side control10.1109/tii.2012.2192283 ↗
15. Design of a universal inductive charger for multiple electric vehicle models10.1109/tpel.2015.2394734 ↗
16. Power transfer capability and bifurcation phenomena of loosely coupled inductive power transfer systems10.1109/tie.2003.822038 ↗
17. Design for efficiency optimization and voltage controllability of series–series compensated inductive power transfer systems10.1109/tpel.2013.2249112 ↗
18. A wireless charging system applying phase-shift and amplitude control to maximize efficiency and extractable power10.1109/tpel.2015.2410216 ↗
19. A 3-kW wireless power transfer system for sightseeing car supercapacitor charge10.1109/tpel.2016.2584701 ↗
20. Constant current charging and maximum efficiency tracking control scheme for supercapacitor wireless charging10.1109/tpel.2018.2793312 ↗
21. Constant current/voltage charging operation for series–series and series–parallel compensated wireless power transfer systems employing primary-side controller10.1109/tpel.2017.2767099 ↗
22. Design and optimization of load-independent magnetic resonant wireless charging system for electric vehicles10.1109/access.2018.2810128 ↗
23. Inductive power transfer for massive electric bicycles charging based on hybrid topology switching with a single inverter10.1109/tpel.2017.2654360 ↗
24. Analysis and design of load-independent output current or output voltage of a three-coil wireless power transfer system10.1109/tte.2018.2808698 ↗
25. A new-variable-coil-structure-based IPT system with load-independent constant output current or voltage for charging electric bicycles10.1109/tpel.2018.2812716 ↗
26. Analysis and design of an LCCC/S compensated WPT system with constant output characteristics for battery charging applications10.1109/JESTPE.2020.2971583 ↗
27. Analysis and design of three-coil structure WPT system with constant output current and voltage for battery charging applications10.1109/access.2019.2925388 ↗
28. Load detection model of voltage-fed inductive power transfer system10.1109/tpel.2013.2243756 ↗
29. Output voltage identification based on transmitting side information for implantable wireless power transfer system10.1109/access.2018.2886424 ↗
30. Front-end monitoring of the mutual inductance and load resistance in a series–series compensated wireless power transfer system10.1109/tpel.2015.2509962 ↗
31. Coil array structures compared for contactless battery charging platform10.1109/tmag.2008.917022 ↗
32. Equivalent circuit modeling of a multilayer planar winding array structure for use in a universal contactless battery charging platform10.1109/tpel.2006.886655 ↗
33. Hybrid topology with configurable charge current and charge voltage output-based WPT charger for massive electric bicycles10.1109/jestpe.2017.2782269 ↗
34. Transmitter-side control of both the CC and CV modes for the wireless EV charging system with the weak communication10.1109/jestpe.2017.2759581 ↗
35. An LC/S compensation topology and coil design technique for wireless power transfer10.1109/tpel.2017.2698002 ↗