Probing the thermal runaway triggering process within a lithium-ion battery cell with local heating
Source abstract
Abstract
Thermal runaway is the most important safety problem of the lithium ion battery. A thermal model combined five side reactions is established to analyze the high temperature distribution change of the separator during the local thermal runaway process of a lithium-ion battery cell with local heating terminals in this paper. The results show that thermal runaway will not be triggered inside a battery cell if a balance of the heat convection between the battery cell and the air forms when a single terminal is heated with 423.15 K. And local thermal runaway can be triggered when the both terminals of the battery cell are heated with 473.15 K and 423.15 K. In addition, the temperature distribution of the separator layer shows an extension trend along the horizontal direction firstly and then along the vertical direction, and local heating makes a big temperature difference inside a battery cell.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Automotive and Traffic Engineering, Jiangsu University , Zhenjiang 212013, China
Funding
National Natural Science Foundation of China
References (35)
Show source-provided references
1. Challenges in the development of advanced Li-ion batteries: A review10.1039/c1ee01598b ↗
2. Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling10.1016/j.enconman.2016.08.063 ↗
3. Energy management of power-split plug-in hybrid electric vehicles based on simulated annealing and Pontryagin’s minimum principle10.1016/j.jpowsour.2014.08.057 ↗
4. Thermal runaway caused fire and explosion of lithium ion battery10.1016/j.jpowsour.2012.02.038 ↗
5. Thermal runaway caused fire and explosion of lithium ion battery
6. Report of investigation: Hybrids plus plug in hybrid electric vehicle
7. Chevrolet volt battery incident summary report
8. Lessons learned from the 787 Dreamliner issue on lithium-ion battery reliability10.3390/en6094682 ↗
9. Thermal modelling of cell-to-cell fire propagation and cascading thermal runaway failure effects for lithium-ion battery cells and modules using fire walls10.1149/2.0131614jes ↗
10. Titanium-based anode materials for safe lithium-ion batteries10.1002/adfm.201200698 ↗
11. Simulation and experimental study on lithium ion battery short circuit10.1016/j.apenergy.2016.04.016 ↗
12. Thermal behavior and failure mechanism of lithium ion cells during overcharge under adiabatic conditions10.1016/j.apenergy.2016.08.124 ↗
13. Building a ‘smart nail’ for penetration tests on Li-ion cells10.1016/j.jpowsour.2013.09.022 ↗
14. Progressive mechanical indentation of large-format Li-ion cells10.1016/j.jpowsour.2016.11.094 ↗
15. A review of hazards associated with primary lithium and lithium-ion batteries10.1016/j.psep.2011.06.022 ↗
16. 100 Wh large size Li-ion batteries and safety tests10.1016/s0378-7753(99)00125-1 ↗
17. A consideration of lithium cell safety10.1016/s0378-7753(98)00240-7 ↗
18. Thermal model of cylindrical and prismatic lithium-ion cells10.1149/1.1377592 ↗
19. Abuse behavior of high-power, lithium-ion cells10.1016/s0378-7753(02)00488-3 ↗
20. A critical review of thermal issues in lithium-ion batteries10.1149/1.3515880 ↗
21. On safety of lithium-ion cells10.1016/s0378-7753(99)00135-4 ↗
22. A three-dimensional thermal abuse model for lithium-ion cells10.1016/j.jpowsour.2007.04.018 ↗
23. Oxygen evolution in overcharged LixNil/3Col/3Mn1/302 electrode and its thermal analysis kinetics10.1002/cjoc.201180284 ↗
24. Effect of carbon coating on LiNi1/3Mn1/3Co1/3O2 cathode material for lithium secondary batteries10.1016/j.jpowsour.2007.06.028 ↗
25. A study on carbon-coated LiNi1/3Mn1/3Co1/3O2 cathode material for lithium secondary batteries10.1007/s10008-008-0552-0 ↗
26. Three-dimension multi-scale electrochemical model for lithium-ion battery based on similarity theory
27. Diagnostic examination of thermally abused high-power lithium-ion cells10.1016/j.jpowsour.2006.04.088 ↗
28. Thermal runaway features of large format prismatic lithium ion battery using extended volume accelerating rate calorimetry10.1016/j.jpowsour.2014.01.005 ↗
29. Thermal behaviour analysis of lithium-ion battery at elevated temperature using deconvolution method10.1016/j.apenergy.2014.04.092 ↗
30. Probing the heat sources during thermal runaway process by thermal analysis of different battery chemistries10.1016/j.jpowsour.2017.12.050 ↗
31. Accelerating rate calorimetry study on the thermal stability of lithium intercalated graphite in electrolyte II. Modeling the results and predicting differential scanning calorimeter curves10.1149/1.1391894 ↗
32. On safety of lithium-ion cells10.1016/s0378-7753(99)00135-4 ↗
33. Derivation and FEM validation of similarity criteria for the electric field in lithium-ion battery
34. Experiments and modeling of nail penetration thermal runaway in a NCM Li-ion power battery
35. Experiments and modeling of anisotropic thermal conductivity of lithium-ion batteries