Suppress the vibration of tool system in milling process
Source abstract
Abstract
A nonlinear energy sink (NES) is used to suppress the vibration of the tool system in milling operations. The corresponding theoretical analysis is done on the nonlinear vibration absorption characteristics of NES. First, the dynamic model of the milling tool system and the milling force are analyzed. The dynamic model and equation of the tool-NES system are then deduced. The approximate analytical solution is solved by the harmonic balance method, and the correctness of the analytical solution is verified by the numerical solution. The numerical simulation reveals the suppression effect of NES on the transient vibration and steady vibration of the tool system.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Tunneling and Rock Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Taiyuan University of Science and Technology , Taiyuan 030024, Shanxi, People’s Republic of China
Funding
The National Natural Science Foundation of China · The Shanxi Provincial Natural Science Foundation of China
References (42)
Show source-provided references
1. A review of chatter vibration research in milling10.1016/j.cja.2018.11.007 ↗
2. Bifurcation analysis of a forced delay equation for machine tool vibrations10.1007/s11071-019-04984-w ↗
3. Subcritical Hopf bifurcation in the delay equation model for machine tool vibrations10.1023/A:1012990608060 ↗
4. Estimating critical Hopf bifurcation parameters for a second-order delay differential equation with application to machine tool chatter10.1023/a:1020455821894 ↗
5. Model predictive control based active chatter control in milling process10.1016/j.ymssp.2019.03.047 ↗
6. State dependent regenerative stability and surface location error in peripheral milling of thin-walled parts10.1016/j.ijmecsci.2021.106294 ↗
7. Time series analysis in metal cutting: Chatter versus chatter-free cutting10.1006/mssp.1998.0174 ↗
8. Analysis of cutting forces in helical ball-end milling based on coordinate conversion10.4028/www.scientific.net/AMR.139-141.917 ↗
9. H-infinity controller design for chatter suppression in machining based on integrated cutting and flexible structure model10.1016/j.automatica.2021.109643 ↗
10. Evaluation of cutting forces and prediction of chatter vibrations in milling10.1590/s1678-58782004000100013 ↗
11. Identifying the transient milling force coefficient of a slender end-milling cutter with vibrations10.1016/j.jmapro.2021.04.068 ↗
12. Mechanistic modeling of the ball end milling process for multi-axis machining of free-form surfaces10.1115/1.1369357 ↗
13. Lobes and lenses in the stability chart of interrupted turning10.1115/1.2198216 ↗
14. Dynamics and stability of variable-pitch milling10.1177/1077546307078754 ↗
15. Analytical prediction of chatter stability for variable pitch and variable helix milling tools10.1016/j.jsv.2008.03.045 ↗
16. Structural design and experimental study of passive damping anti-vibration milling cutter
17. Analytical modeling, design and performance evaluation of chatter-free milling cutter with alternating pitch variations10.1109/access.2018.2841000 ↗
18. Chatter suppression techniques in metal cutting10.1016/j.cirp.2016.06.004 ↗
19. Suppression of chatter vibration of a CNC machine centre—An example10.1006/mssp.1996.0038 ↗
20. Chatter mitigation for the milling of thin-walled workpiece10.1016/j.ijmecsci.2018.02.014 ↗
21. Mitigation of chatter in thin-wall milling by using double-side support device10.1007/s00170-021-06929-3 ↗
22. Improvement of chatter stability in boring operations with passive vibration absorbers10.1016/j.ijmecsci.2010.07.003 ↗
23. Preliminary computations for chatter control in end milling10.1006/jsvi.2001.3740 ↗
24. Numerical analysis and parameter study of a mechanical damper for use in long slender endmills10.1016/j.ijmachtools.2005.07.004 ↗
25. Effect of cutting conditions and tool geometry on process damping in machining10.1016/j.ijmachtools.2012.01.009 ↗
26. A solution for minimising vibrations in milling of thin-walled casings by applying dampers to workpiece surface10.1016/j.cirp.2013.03.136 ↗
27. Milling vibration attenuation by eddy current damping10.1007/s00170-015-7239-3 ↗
28. Milling chatter suppression in viscous fluid: A feasibility study10.1016/j.ijmachtools.2017.02.005 ↗
29. Enhanced targeted energy transfer by vibro impact cubic nonlinear energy sink10.1142/s1758825118500618 ↗
30. Bending vibration suppression of a flexible multispan shaft using smart spring support10.1155/2017/7859164 ↗
31. Forced system with vibro-impact energy sink: Chaotic strongly modulated responses10.1016/j.piutam.2016.03.009 ↗
32. Vibration suppression of a nonlinear fluid-conveying pipe under harmonic foundation displacement excitation via nonlinear energy sink10.1142/s1758825118500965 ↗
33. Magnetic nonlinear energy sink for vibration attenuation of unbalanced rotor system10.1155/2017/4132607 ↗
34. Multi-stable nonlinear energy sink for rotor system10.1016/j.ijnonlinmec.2019.103273 ↗
35. Nonlinear vibration absorption of laminated composite beams in complex environment10.1007/s11071-019-05442-3 ↗
36. Reducing thermal shock-induced vibration of an axially moving beam via a nonlinear energy sink10.1007/s11071-016-3107-4 ↗
37. Vibration suppression of composite laminated plate with nonlinear energy sink10.1016/j.actaastro.2016.02.021 ↗
38. Chatter control in turning process with a nonlinear energy sink10.4028/www.scientific.net/amr.698.89 ↗
39. Chatter mitigation using the nonlinear tuned vibration absorber10.1016/j.ijnonlinmec.2017.02.014 ↗
40. Dynamic vibration absorber with negative stiffness for rotor system10.1155/2016/5231704 ↗
41. Complex dynamics of a harmonically excited structure coupled with a nonlinear energy sink10.1007/s10409-017-0671-x ↗
42. Nonlinear vibration isolation of a viscoelastic beam10.1007/s11071-018-4058-8 ↗