Study on characteristics of gas–liquid two-phase flow in pump as turbine using multiple-size group model
Source abstract
Abstract
The multi-size group (MUSIG) model is employed in this paper to simulate the gas–liquid two-phase flow in pump as turbine (PAT) since the traditional Eulerian–Eulerian two-fluid model is unable to take into account the phenomena of breakup and coalescence of bubbles. First, the simulation of gas–liquid two-phase flow in a square column is compared with the experiment to verify the accuracy of the MUSIG model. Then, the results of gas–liquid two-phase flow in PAT simulated by the MUSIG model are compared with those by the conventional uniform bubble (UB) model and find that the MUSIG model is more favorable to capture the flow pattern at high gas content compared to the UB model. Based on the MUSIG model, the internal flow characteristics, pressure fluctuation, and bubble size distribution of the PAT are analyzed. The rotation of the blades breaks a part of big bubbles into small bubbles in the volute, resulting in a smaller diameter of the bubbles entering the impeller. As the gas content increases, the number and size of vortices in the impeller flow channel increase. The vortex is formed at locations where the gas phase distribution in the impeller flow channel is concentrated. The outlet of the impeller is more prone to bubble consolidation under high gas content conditions. In conclusion, the MUSIG model can well predict the complex flow characteristics of gas–liquid two-phase inside the PAT and identify the key influencing factors of energy acquisition, which can provide support for improving the performance of the PAT design.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fluid Dynamics and Mixing · Cavitation Phenomena in Pumps · Cyclone Separators and Fluid Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Fluid Transmission Technology of Zhejiang Province, Zhejiang Sci-Tech University , Hangzhou, Zhejiang 310018, China
Funding
National Natural Science Foundation of China · Science and Technology Bureau of Xinjiang Production and Construction Corps · Zhejiang Sci-Tech University
References (34)
Show source-provided references
1. Reverse running pumps analytical, experimental and computational study: A review10.1016/j.rser.2010.04.006 ↗
2. Investigation on hydrodynamic characteristics of coastal axial flow pump system model under full working condition of forward rotation based on experiment and CFD method10.1016/j.oceaneng.2022.111286 ↗
3. A comprehensive overview of new designs in the hydraulic, electrical equipments and controllers of mini hydro power plants making it cost effective technology10.1016/j.rser.2012.12.002 ↗
4. Numerical investigation on the blade load distribution in a pump as turbine10.3389/fenrg.2023.1220395 ↗
5. Investigations on pump running in turbine mode: A review of the state-of-the-art10.1016/j.rser.2013.11.030 ↗
6. Numerical investigation on the volute cutwater for pumps running in turbine mode10.1016/j.renene.2021.04.112 ↗
7. Studying the impact of impeller geometrical parameters on the high-efficiency working range of pump as turbine (PAT) installed in the water distribution network10.1016/j.renene.2023.119060 ↗
8. Recent progress in hydrotreating kinetics and modeling of heavy oil and residue: A review10.1016/j.fuel.2022.126404 ↗
9. Conceptual design, optimization and thermodynamic analysis of a CO2 capture process based on Rectisol10.1016/j.energy.2021.122566 ↗
10. Cause analysis and treatment of slurry foaming in desulfurization absorption tower of 300MW unit10.1088/1755-1315/804/3/032008 ↗
11. Force characteristics of centrifugal pump as turbine during start-up process under gas–liquid two-phase conditions10.3390/act11120370 ↗
12. Numerical analysis of two-phase flow in a micro-hydraulic turbine10.5293/ijfms.2019.12.4.430 ↗
13. Investigation on the power loss and radial force characteristics of pump as turbine under gas–liquid two-phase condition10.1177/1687814019843732 ↗
14. Study on the effect of gas-liquid two-phase medium on PAT performance: Original papers10.5293/ijfms.2021.14.3.247 ↗
15. Gas–liquid two-phase performance of centrifugal pump under bubble inflow based on computational fluid dynamics–population balance model coupling model10.1115/1.4047064 ↗
16. Numerical simulation of gas–liquid two-phase flow CFD–PBM model in a micro–nanobubble generator10.3390/min12101270 ↗
17. Experimental study and numerical simulation of gas–liquid two-phase flow in aeration tank based on CFD-PBM coupled model10.3390/w12061569 ↗
18. Numerical investigation on bubble distribution of a multistage centrifugal pump based on a population balance model10.3390/en13040908 ↗
19. Flow characteristic analysis of the self-priming pump based on the population balance model10.3389/fenrg.2022.880338 ↗
20. Numerical modelling of air–nanofluid bubbly flows in a vertical tube using the MUltiple-SIze-Group (MUSIG) model10.1016/j.ijheatmasstransfer.2016.06.021 ↗
21. Numerical simulation research of subcooled flow boiling based on MUSIG model under low pressure10.1088/1755-1315/467/1/012016 ↗
22. Gas–liquid two-phase flow investigation of side channel pump: An application of MUSIG model10.3390/math8040624 ↗
23. Numerical analysis on performance of induced gas flotation machine using MUSIG model10.1080/19942060.2020.1771426 ↗
24. Performance evaluation of cleaning energy of an induced gas flotation machine using multiple-size-group (MUSIG) model10.1016/j.egypro.2017.12.230 ↗
25. Update to the MUSIG model in ANSYS CFX for reliable modelling of bubble coalescence and breakup10.1016/j.apm.2020.01.033 ↗
26. Application of a non-uniform bubble model in a multiphase rotodynamic pump10.1016/j.petrol.2018.10.107 ↗
27. Theoretical model for drop and bubble breakup in turbulent dispersions10.1002/aic.690420505 ↗
28. Bubble coalescence and break-up in air-sparged bubble columns10.1002/aic.690361004 ↗
29. Large eddy simulation of the gas–liquid flow in a square cross-sectioned bubble column10.1016/s0009-2509(01)00249-4 ↗
30. Numerical study on gas-liquid two phase flow characteristic of multistage electrical submersible pump by using a novel multiple-size group (MUSIG) model10.1063/5.0095829 ↗
31. Investigation of flow separation characteristics in a pump as turbines impeller under the best efficiency point condition10.1115/1.4049816 ↗
32. Application of enstrophy dissipation to analyze energy loss in a centrifugal pump as turbine10.1016/j.renene.2020.08.109 ↗
33. Effect of working conditions and diffuser setting angle on pressure fluctuations within a centrifugal pump10.1016/j.ijheatfluidflow.2018.11.011 ↗
34. Investigation on characteristics of pressure fluctuation in a centrifugal pump with clearance flow10.1007/s12206-020-0818-8 ↗