Research on the pressure field and loading characteristics of air film of air cushion belt conveyor
Source abstract
Abstract
The power loss generated by the air cushion belt conveyor when transporting materials mainly depends on the diameter of the orifice, the form of arrangement, and the thickness of the air film. A mathematical model of an air cushion belt conveyor is established through mechanical analysis, and the relationship between load distribution, air film thickness, air film carrying capacity, and power consumption is found. Numerical simulations of orifices of different diameters on the disk groove and the formed air film are carried out, and the loading capacity of the air film was analyzed by observing the stress and deformation of the wire rope core. The results show that the air film formed by the selected type of orifice arrangement in this paper carries the load, which causes the least amount of deformation and stress change in the wire rope core, and the stability of the air film loading capacity is also verified by experiments.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Vibration and Dynamic Analysis · Belt Conveyor Systems Engineering · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical Engineering College, Taiyuan University of Science and Technology 1 , Shanxi 030024, China
Shanxi Institute of Energy 2 , Shanxi 030024, China
Funding
National Natural Science Foundation of China
References (26)
Show source-provided references
1. 2018
2. 2020
3. Experimental research on air film formation behavior of air cushion belt conveyor with stable load10.1007/s11431-013-5183-8 ↗
4. Study and numerical simulation of air cushion pressure field of air-cushion belt conveyor
5. 2015
6. Numerical simulation of air cushion pressure field of air cushion belt conveyor
7. Special air bed conveyor with pneumatic actuator of the nozzle scheme forced induction method
8. Estimation of deformation for a glass sheet on a noncontact air conveyor with film pressure feedback10.1088/1361-6501/ab56cc ↗
9. Experimental investigations on the resistance performance of a high speed partial air cushion supported catamaran10.1016/j.ijnaoe.2019.05.004 ↗
10. Study on the basic characteristics of a contactless air film conveyor using viscous traction10.1177/1350650116629905 ↗
11. A study on hydrodynamics of the air cushion of a high-speed PACSCAT10.1016/j.euromechflu.2018.07.004 ↗
12. Theoretical and experimental investigation on air film pressure field characteristics of aerostatic thrust bearing
13. Study on the static performance speed effect of hydrostatic and dynamic pressure gas radial bearings
14. CFD analysis of the load loading capacity of radial dynamic pressure gas bearings10.3969/j.issn.02540150.2022.01.012 ↗
15. Characterization of a planar hydrostatic gas loading with gas chamber structure10.13841/j.cnki.jxsj.2022.01.025 ↗
16. Numerical calculation of steady-state performance of T-slotted cylindrical air-film seal10.3969/j.issn.1673-3142.2022.02.002 ↗
17. Numerical modeling and experimental verification of compressible squeeze film pressure10.1016/j.triboint.2009.06.015 ↗
18. Study on airflow characteristics in the semi-closed irregular narrow flow channel10.1007/s11630-016-0842-2 ↗
19. Analysis of aerodynamic thermal and flow characteristics of dynamic pressure gas thrust bearing gap10.13224/j.cnki.jasp.20210541 ↗
20. Experimental study on the effect of flow distribution on the pressure distribution characteristics of the inner channel of turbine blades10.16615/j.cnki.1674-8190.2013.04.016 ↗
21. Numerical investigation on air film fusion of pressure-equalizing exhaust around shoulder ventilation of submarine-launched vehicle10.3390/jmse10010039 ↗
22. Study on the effect of venting holes on the flow field inside the tubular set of drug type10.3969/j.issn.1003-1480.2021.06.004 ↗
23. Numerical simulation of the flow field of circular hole ventilation under the action of lateral water flow10.16076/j.cnki.cjhd.2020.03.003. ↗
24. Investigation of flow characteristics and eddy viscosity ratio for air-oil intermittent flow in horizontal pipe10.1007/s12206-021-0925-1 ↗
25. Simulation and optimal design of flow field in airflow distribution chamber of pneumatic rice cavity forming machine10.6041/j.issn.1000-1298.2018.04.011 ↗
26. 2010