Comparative study of the damping performance of concentrated masses and particle dampers based on cantilever beams
Source abstract
Abstract
This paper investigates the damping performance of the main structure with a concentrated mass and particle dampers at different particle filling rates and sinusoidal sweep amplitudes under the same mass ratio by means of a controlled experiment, with the concentrated mass and particle dampers attached to the free end of the cantilever beam. As the order increases, the effect becomes progressively weaker. For cantilevered beam structures, a reasonable design with only a small mass ratio of particle dampers can effectively suppress the vibration of the first order. For the second- and third-order bending vibration, particle dampers with high mass ratios show a better damping effect, and when the strength of the excitation reaches a certain value, the damping performance of the particle dampers is basically better than that of the concentrated mass under the same conditions. The reason for this is that particle damping not only dampens the vibration by tuning the mass but also dissipates the energy of the main structure by means of collisions, impacts, and friction between the particles or between the particles and the damper cavity.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Vibration Control and Rheological Fluids · Seismic Performance and Analysis · Structural Health Monitoring Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Noise and Vibration, Naval University of Engineering 1 , Wuhan 430033, China
National Key Laboratory on Ship Vibration and Noise 2 , Wuhan 430033, China
Unit 91937 of the Chinese People’s Liberation Army 3 , Zhoushan 316000, China
References (16)
Show source-provided references
1. Single unit impact damper in free and forced vibration10.1016/0022-460x(85)90446-8 ↗
2. R. D. Friend, “Particle impact damping,” Ph.D. thesis (Texas A & M University, 1999).
3. Analytical study of multi-particle damping10.1016/j.jsv.2004.02.034 ↗
4. Regression analysis of particle damping
5. Application of restoring force surface method to particle damping research10.7666/d.d038248 ↗
6. Study on power flow of a stiffened plate with non-obstructive particle damping10.3321/j.issn:0253-987X.2001.01.014 ↗
7. Application of ANN techniques for estimating modal damping of impact-damped flexible beams10.1016/j.advengsoft.2009.04.001 ↗
8. Z. Tianping, “The study of damping effect of particle damper on a cantilever structure by the force vibration,” M.S. thesis (Lanzhou University, 2012).
9. Experiments of vibration reduction effect of particle damping on helicopter Rotor Blade10.3321/j.issn:1000-6893.2009.11.016 ↗
10. Shaking table test of steel frame structure with particle tuned mass damper10.140066/j.jzjgxb.2017.04.002 ↗
11. Comparative experimental study of particle damper and tuned mass damper10.13197/j.eeev.2014.S0.738.luz.115 ↗
12. On modeling of arrays of passive granular dampers10.1117/12.349800 ↗
13. Dissipative properties of vibrated granular materials10.1103/PhysRevE.59.4422 ↗
14. Dissipative properties of granular ensembles10.1117/12.310696 ↗
15. Z. Hongwei, “Study on particle damping and its control with applications,” Ph.D. thesis (Nanjing University of Aeronautics and Astronautics, 2008).10.7666/d.d051965
16. Characterization of vibration control effects of particle dampers under random excitation10.15951/j.tmgcxb.2014.s1.028 ↗