First-principles study of Pd-MoSe2 as sensing material for characteristic SF6 decomposition components
Source abstract
Abstract
SF6 decomposition component detection is an effective way to diagnose the severity and type of electric discharge. In this study, MoSe2 based material has been chosen as the gas sensing material for the detection of SOF2 and SO2F2, the two characteristic decomposition components of SF6. Based on density functional theory calculations, the adsorption properties of both SOF2 and SO2F2 on intrinsic and Pd doped MoSe2 are studied by analyzing the adsorption structure, charge transfer, density of states, and molecular orbit. The results show that SOF2 and SO2F2 adsorb on intrinsic MoSe2 by physisorption, resulting in weak gas sensitivity. After Pd doping on MoSe2, it dramatically enhances the gas sensitivity of MoSe2 to SOF2 and SO2F2; both the gases interact with Pd-MoSe2 by chemisorption. In addition, SOF2 and SO2F2 show an increase in conductivity during the adsorption process to different extents. The calculation results show that Pd-MoSe2 can be a potential gas sensing material for SOF2 and SO2F2 detection in SF6-insulated equipment.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · High voltage insulation and dielectric phenomena · Ga2O3 and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Maintenance and Test Center of EHV Power Transmission Company , China Southern Power Grid, Guangzhou 510663, China
Funding
National Key Research and Development Program of China
References (30)
Show source-provided references
1. Partial discharge recognition through an analysis of SF6 decomposition products. Part 1: Decomposition characteristics of SF6 under four different partial discharges10.1109/tdei.2012.6148499 ↗
2. Motion and discharge characteristics of metal particles existing in GIS under DC voltage10.1109/tdei.2017.006210 ↗
3. Discharge performance of conductor spikes in GIS under AC voltage
4. Direct current gas-insulated transmission lines10.1109/tpwrd.2017.2716182 ↗
5. Substations SF6 circuit breakers: Reliability evaluation based on equipment condition10.1016/j.epsr.2016.08.018 ↗
6. Investigation on SF6 spark decomposition characteristics under different pressures10.1109/tdei.2017.006326 ↗
7. Decomposition characteristics of SF6 and partial discharge recognition under negative DC conditions10.3390/en10040556 ↗
8. Decomposition characteristics of SF6 under flashover discharge on the epoxy resin surface10.3390/ma12091408 ↗
9. Calculation on the composition varying characteristics of decaying SF6 arc in the presence of trace oxygen and moisture
10. A novel GIS partial discharge detection sensor with integrated optical and UHF methods10.1109/tpwrd.2016.2635382 ↗
11. Optical fiber acoustic emission sensor for GIS partial discharge detection
12. Synthesis of graphene-based sensors and application on detecting SF6 decomposing products: A review10.3390/s17020363 ↗
13. Recent progress on the development of chemosensors for gases10.1021/cr500567r ↗
14. Pristine and Cu decorated hexagonal InN monolayer, a promising candidate to detect and scavenge SF6 decompositions based on first-principle study10.1016/j.jhazmat.2018.10.006 ↗
15. Ru-InN monolayer as a gas scavenger to guard the operation status of SF6 insulation devices: A first-principles theory10.1109/jsen.2019.2899966 ↗
16. Dissolved gas analysis in transformer oil using Pd catalyst decorated MoSe2 monolayer: A first-principles theory10.1016/j.susmat.2019.e00094 ↗
17. A highly sensitive chemical gas detecting transistor based on highly crystalline CVD-grown MoSe2 films10.1007/s12274-016-1291-7 ↗
18. Single-layer MoSe2 based NH3 gas sensor10.1063/1.4903358 ↗
19. Effect of Nb doping on chemical sensing performance of two-dimensional layered MoSe210.1021/acsami.6b14551 ↗
20. Fabrication of Pd-decorated MoSe2 nanoflowers and density functional theory simulation toward ammonia sensing10.1109/led.2019.2901296 ↗
21. Rh-doped MoSe2 as a toxic gas scavenger: A first-principles study10.1039/c8na00233a ↗
22. Adsorption characteristic of Rh-doped MoSe2 monolayer towards H2 and C2H2 for DGA in transformer oil based on DFT method10.1016/j.apsusc.2019.05.108 ↗
23. The sensing mechanism of N-doped SWCNTs toward SF6 decomposition products: A first-principle study10.1016/j.apsusc.2018.01.247 ↗
24. Adsorption of SF6 decomposition components on Pt3-TiO2(1 0 1) surface: A DFT study10.1016/j.apsusc.2018.07.219 ↗
25. Adsorption of SF6 decomposition components over Pd (1 1 1): A density functional theory study10.1016/j.apsusc.2018.09.147 ↗
26. A DFT study on the adsorption of H2S and SO2 on Ni doped MoS2 monolayer10.3390/nano8090646 ↗
27. Theoretical study of the adsorption of SF6 decomposition components on Ni(1 1 1) surface10.1016/j.commatsci.2018.05.054 ↗
28. Enhanced mechanical properties and thermal stability of cellulose insulation paper achieved by doping with melamine-grafted nano-SiO210.1007/s10570-018-1813-4 ↗
29. Molecular simulation on the thermal stability of meta-aramid insulation paper fiber at transformer operating temperature10.3390/polym10121348 ↗
30. Effect of aminosilane coupling agents with different chain lengths on thermo-mechanical properties of cross-linked epoxy resin10.3390/nano8110951 ↗