Impact of the confinement plate on the synthetic jet
Source abstract
Abstract
Axisymmetric synthetic jet actuators making use of loudspeakers and four lengths of the orifice with and without a confinement plate were experimentally tested and compared. The first (reference) orifice was the shortest one and was confined by the actuator wall. The next length of orifices was obtained with the use of one of three orifices’ extension, with or without a confinement plate. The possibility of the use of the power factor to find the first characteristic frequency is presented. The dependence of the reaction force from the orifice length and the power is described. The time-reaction force of the actuator was measured. The actuators with a confinement plate at the time of measurements of frequency function and at the constant power generate less reaction force, as well as less velocity and efficiency, than the ones without it (even 1.8% at the characteristic frequency).
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Plasma and Flow Control in Aerodynamics · Aerodynamics and Acoustics in Jet Flows · Fluid Dynamics and Turbulent Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
UTP University of Science and Technology 1 , Al. Prof. S. Kaliskiego 7, 85-796 Bydgoszcz, Poland
Rzeszów University of Technology 2 , Al. Powstańców Warszawy 12, 35-959 Rzeszów, Poland
Funding
Narodowe Centrum Badań i Rozwoju
References (34)
Show source-provided references
1. Bluff body drag control using synthetic jet10.29252/jafm.75.253.28960 ↗
2. Active flow control for supersonic aircraft: A novel hybrid synthetic jet actuator10.1016/j.sna.2019.111770 ↗
3. Heat transfer coefficients during the impingement cooling with the use of synthetic jet10.1016/j.ijthermalsci.2019.106132 ↗
4. Synthetic jet actuators for heat transfer enhancement—A critical review10.1016/j.ijheatmasstransfer.2019.118815 ↗
5. Liquid pimping and mixing by PZT synthetic jet
6. Characteristics of mixing enhancement achieved using a pulsed plasma synthetic jet in a supersonic flow10.1631/jzus.A1900130 ↗
7. The formation and evolution of synthetic jets10.1063/1.869828 ↗
8. Heat transfer and acoustic study of impinging synthetic jet using diamond and oval shape orifice10.1016/j.ijthermalsci.2014.10.006 ↗
9. On the flow organization of a chevron synthetic jet10.1016/j.expthermflusci.2016.11.009 ↗
10. Convective heat transfer in circular and chevron impinging synthetic jets10.1016/j.ijheatmasstransfer.2018.06.062 ↗
11. Novel nozzle shapes for synthetic jet actuators intended to enhance jet momentum flux10.3390/ACT7030053 ↗
12. Influence of internal orifice geometry on synthetic jet performance10.1007/s00348-019-2697-2 ↗
13. Influence of the excitation frequency and orifice geometry on the fluid flow and heat transfer characteristics of synthetic jet actuators10.1134/S0015462819040086 ↗
14. Effect of orifice shape in synthetic jet based impingement cooling10.1016/j.expthermflusci.2009.11.001 ↗
15. Modelling of efficiency of synthetic jet actuators10.1016/j.sna.2015.07.030 ↗
16. Jet vectoring using synthetic jets10.1017/S0022112001007406 ↗
17. A numerical study on the influence of cavity shape on synthetic jet performance10.1016/j.ijheatfluidflow.2018.10.001 ↗
18. Effect of geometric parameters on synthetic jet: A review10.1063/1.5142408 ↗
19. Time and phase average heat transfer in single and twin circular synthetic impinging air jets10.1016/j.ijheatmasstransfer.2014.02.030 ↗
20. Effects of the stroke length and nozzle-to-plate distance on synthetic jet impingement heat transfer10.1016/j.ijheatmasstransfer.2017.09.118 ↗
21. Fish response to turbulence generated using multiple randomly actuated synthetic jet arrays10.3390/w11081715 ↗
22. Synthetic jet Reynolds number based on reaction force measurement10.1016/j.jfluidstructs.2018.05.011 ↗
23. Synthetic jet actuator efficiency based on the reaction force measurement10.1016/j.sna.2019.06.011 ↗
24. Formation criterion for synthetic jets10.2514/1.12033 ↗
25. Formation criterion for axisymmetric synthetic jets at high Stokes numbers10.2514/1.J051649 ↗
26. Performance of synthetic jet actuators based on hybrid and double-acting principles10.1007/BF03181710 ↗
27. On the effects of square-fractal turbulators on the flow field generated by a synthetic jet actuator10.1016/j.expthermflusci.2018.12.005 ↗
28. Energetic efficiencies of synthetic and hybrid synthetic jet actuators driven by electrodynamic transducers10.1016/j.expthermflusci.2015.08.005 ↗
29. Axisymmetric valve with synthetic jet actuator
30. Visualization study of hybrid synthetic jets10.1007/s12650-014-0256-8 ↗
31. Optimal diameter of nozzles of synthetic jet actuators based on electrodynamic transducers10.1016/j.expthermflusci.2017.03.010 ↗
32. General reduced-order model to design and operate synthetic jet actuators10.2514/1.J051381 ↗
33. Influence of cavity shape on synthetic jet performance10.1016/j.sna.2014.12.004 ↗
34. Synthetic jets in cross-flow10.2514/1.4714 ↗