Magnetic shielding structure optimization design for wireless power transmission coil
Source abstract
Abstract
In order to improve the performance of the wireless power transmission (WPT) system, a novel design scheme with magnetic shielding structure on the WPT coil is presented in this paper. This new type of shielding structure has great advantages on magnetic flux leakage reduction and magnetic field concentration. On the basis of theoretical calculation of coil magnetic flux linkage and characteristic analysis as well as practical application feasibility consideration, a complete magnetic shielding structure was designed and the whole design procedure was represented in detail. The simulation results show that the coil with the designed shielding structure has the maximum energy transmission efficiency. Compared with the traditional shielding structure, the weight of the new design is significantly decreased by about 41%. Finally, according to the designed shielding structure, the corresponding experiment platform is built to verify the correctness and superiority of the proposed scheme.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Wireless Power Transfer Systems · Energy Harvesting in Wireless Networks · Innovative Energy Harvesting Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Electrical Engineering, Wuhan University 1 , Wuhan, Hubei 430072, China
Department of Neurological Surgery, University of Pittsburgh 2 , Pittsburgh, PA 15213, USA
Funding
National Natural Science Foundation of China
References (29)
Show source-provided references
1. A triple-loop inductive power transmission system for biomedical applications10.1109/tbcas.2014.2376965 ↗
2. Cost-effectiveness comparison of coupler designs of wireless power transfer for electric vehicle dynamic charging10.3390/en9110906 ↗
3. Design and testing of a motor-based capsule robot powered by wireless power transmission10.1109/tmech.2015.2497083 ↗
4. Wireless power transfer system architectures for portable or implantable applications10.3390/en9121087 ↗
5. An efficient wireless power transfer system with security considerations for electric vehicle applications10.1063/1.4866238 ↗
6. An integrated characterization model and multi-objective optimization for the design of an EV charger’s circular wireless power transfer pads
7. A new shielding method for magnetic fields of a wireless EV charger with regard to human exposure by eddy current and magnetic path
8. Coil design and measurements of automotive magnetic resonant wireless charging system for high-efficiency and low magnetic field leakage
9. Analytical design study of a novel witricity charger with lateral and angular misalignments for efficient wireless energy transmission10.1109/tmag.2011.2151253 ↗
10. Six degrees of freedom mobile inductive power transfer by crossed dipole Tx and Rx coils10.1109/tpel.2015.2449290 ↗
11. Wireless power transfer in the presence of metallic plates: Experimental results
12. Design considerations of superconducting wireless power transfer for electric vehicle at different inserted resonators10.1109/tasc.2016.2532904 ↗
13. Evaluation of the shielding effects on printed-circuit-board transformers using ferrite plates and copper sheets,”10.1109/tpel.2002.805585 ↗
14. Coreless planar printed-circuit-board (PCB) transformers-a fundamental concept for signal and energy transfer,”10.1109/63.867683 ↗
15. FEM simulation and experiment of a novel shielding structure of wireless power transfer system
16. Optimal magnetic field shielding method by metallic sheets in wireless power transfer system10.3390/en9090733 ↗
17. A comparative study between witricity and traditional inductive coupling in wireless energy transmission
18. Optimal coupling to achieve maximum output power in a WPT system10.1109/tpel.2015.2504625 ↗
19. Experiments on adjustable magnetic metamaterials applied in megahertz wireless power transmission
20. Fem simulations and experiments for the advanced witricity charger with compound nano-Tio$__{2$ interlayersm10.1109/tmag.2011.2158576 ↗
21. Analysis and performance improvement of WPT systems in the environment of single non-ferromagnetic metal plates10.3390/en9080576 ↗
22. Experimental investigation of compact metamaterial for high efficiency mid-range wireless power transfer applications
23. A 3-kw wireless power transfer system for sightseeing car supercapacitor charge10.1109/tpel.2016.2584701 ↗
24. Derivation of coupling factors for different wireless power transfer systems: inter- and intralaboratory comparison
25. Loosely coupled transformer coil design to minimize emf radiation in concerned areas10.1109/tvt.2016.2535272 ↗
26. Investigation of energy harvesting for magnetic sensor arrays on mars by wireless power transmission
27. The story of Q
28. Wireless power transfer using weakly coupled magnetostatic resonators
29. 2012