Simulation and experiment on the catalytic degradation of high-concentration SF6 on TiO2 surface under UV light

The high-temperature effect gas SF6 is used in the power industry, and its emissions are increasing daily. Therefore, the degradation of SF6 is particularly important. In this work, SF6 with a high concentration of 2% was degraded using the catalytic principle of TiO2 under UV light at normal temperature and pressure. Experimental results proved that this method can effectively degrade SF6. Moreover, the addition of TiO2 can effectively increase the degradation rate of SF6. The degradation of eight pieces of TiO2 with a unit area of 3 cm2 was 8.98% after 3 h of catalysis. FTIR spectral analysis showed that the main degradation products were SO2F2, SiF4, SF4, and SO2. Adding H2O can further increase the degradation rate, which can reach 27.22% in 3 h. The main degradation products were SO2F2, SiF4, SF4, SiH4, HF, and SO2. Finally, simulations verified the catalytic decomposition of SF6 on the surface of TiO2.