Geomechanical method for wellbore stability prediction: A case study of the Longmaxi formation in the Yongchuan shale gas field, southwestern China
Source abstract
Abstract
Shale formations display heterogeneous characteristics, and the current methods for assessing the stability of adjacent wells using drilling data have limitations. This paper presents a regional wellbore stability prediction method for shale formations using geomechanics, with a case study on the Longmaxi formation in the Yongchuan area. A 3D structural model was constructed using seismic data and incorporated into finite element software to replicate the heterogeneous mechanical parameters. Numerical simulations were employed to determine the regional in situ stress and predict fracture development based on rock failure criteria. The findings indicate that the maximum and minimum principal stresses in the Longmaxi formation within the Yongchuan area range from 75 to 117 MPa and 54–102 MPa, respectively. The in situ stress is elevated in the dip and fault areas, with fractures primarily occurring in the fault and anticline regions. Both the in situ stress and fracture distribution display significant heterogeneity. Collapse pressure varies from 1.07 to 1.61 g/cm3, with higher values in the fractured zone and maxima in the fault area. Experimental validation supports the simulation results. In addition, this paper examines the influence of elastic modulus, Poisson’s ratio, cohesion, and fracture angle on fracture development and collapse pressure. The results indicate that elastic modulus, cohesion, and fracture angle have a substantial impact, whereas Poisson’s ratio has a minor effect. These findings provide new insights into wellbore stability assessment in shale formations.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrocarbon exploration and reservoir analysis · Seismic Imaging and Inversion Techniques · Hydraulic Fracturing and Reservoir Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
National Key Laboratory of Oil and Gas Reservoir Geology and Exploration, Southwest Petroleum University 1 , Chengdu 610500,
Underbalanced Drilling Research Division, National Engineering Research Center of Oil and Gas Drilling and Completion Technology 2 , Chengdu 610500,
Petroleum Engineering Technology Research Institute, Sinopec Southwest Oil and Gas Company 3 , Deyang 618000,
Funding
National Natural Science Foundation of China · Natural Science Foundation of Sichuan Province · National Key Research and Development Program of China
References (54)
Show source-provided references
1. Wellbore stability and failure regions analysis of shale formation accounting for weak bedding planes in ordos basin10.1016/j.jngse.2020.103258 ↗
2. A wellbore stability analysis model with chemical-mechanical coupling for shale gas reservoirs10.1016/j.jngse.2015.05.028 ↗
3. Wellbore stability model in shale formation under the synergistic effect of stress unloading-hydration10.1016/s1876-3804(24)60481-7 ↗
4. Borehole stability in naturally fractured rocks with drilling mud intrusion and associated fracture strength weakening: A coupled DFN-DEM approach10.1016/j.jrmge.2023.07.012 ↗
5. Simultaneously improving ROP and maintaining wellbore stability in shale gas well: A case study of Luzhou shale gas reservoirs10.1016/j.rockmb.2024.100124 ↗
6. Stability analysis of vertical boreholes using the Mogi–Coulomb failure criterion10.1016/j.ijrmms.2006.04.001 ↗
7. Shear failure of anistropic rocks10.1017/s0016756800061100 ↗
8. A wellbore stability model for a deviated well in a transversely isotropic formation considering poroelastic effects10.1007/s00603-016-1019-8 ↗
9. Wellbore breakout prediction in transversely isotropic rocks using true-triaxial failure criteria10.1016/j.ijrmms.2018.10.033 ↗
10. Wellbore stability analysis of layered shale based on the modified Mogi–Coulomb criterion10.1016/j.petlm.2019.11.002 ↗
11. Wellbore stability model for horizontal wells in shale formations with multiple planes of weakness10.1016/j.jngse.2018.01.029 ↗
12. A wellbore stability model for formations with anisotropic rock strengths10.1016/j.petrol.2012.08.010 ↗
13. Wellbore stability analysis in transverse isotropic shales with anisotropic failure criteria10.1016/j.petrol.2019.01.092 ↗
14. Influence of anisotropies in borehole stability10.1016/0148-9062(93)90073-m ↗
15. Borehole stability analysis of horizontal drilling in shale gas reservoirs10.1007/s00603-012-0341-z ↗
16. Stability analysis of wellbore for multiple weakness planes in shale formations10.1007/s40948-021-00228-7 ↗
17. Shale bedding impact on wellbore stability and drilling optimization
18. Numerical simulation of failure mechanism of horizontal borehole in transversely isotropic shale gas reservoirs10.1016/j.jngse.2017.05.015 ↗
19. Wellbore stability analysis and breakout pressure prediction in vertical and deviated boreholes using failure criteria—A case study10.1016/j.petrol.2016.06.024 ↗
20. Influence of multi-planes of weakness on unstable zones near wellbore wall in a fractured formation10.1016/j.jngse.2021.104026 ↗
21. Shale damage simulation considering shale swelling during shale-liquid interaction10.1016/j.fuel.2023.127423 ↗
22. Effects of shale swelling on shale mechanics during shale–liquid interaction10.1016/j.energy.2023.128098 ↗
23. The influence of shale swelling on casing deformation during hydraulic fracturing10.1016/j.petrol.2021.108844 ↗
24. Casing deformation mechanisms of horizontal wells in Weirong shale gas field during multistage hydraulic fracturing10.1016/j.jngse.2020.103646 ↗
25. Accumulation and exploration enlightenment of shallow normal-pressure shale gas in southeastern Sichuan Basin, SW China10.1016/s1876-3804(24)60468-4 ↗
26. Fields and directions for shale gas exploration in China10.1016/j.ngib.2021.08.014 ↗
27. Key policy needs for the success of China’s shale gas revolution10.1016/j.egyr.2024.03.052 ↗
28. Principal characteristics of marine shale gas, and the theory and technology of its exploration and development in China10.1016/j.ngib.2023.01.002 ↗
29. Influencing factors and prevention measures of casing deformation in deep shale gas wells in Luzhou block, southern Sichuan Basin, SW China10.1016/s1876-3804(23)60443-4 ↗
30. The present-day in-situ stress field and its effect on shale gas development in Zigong area of southern Sichuan Basin10.1016/j.uncres.2024.100078 ↗
31. Research on casing failure mechanisms and countermeasures in hydraulic fracture of shale reservoirs considering dynamic evolution of fault slip10.1016/j.engfailanal.2024.108301 ↗
32. Fracture features and fault influence on gas accumulation in the Longmaxi Formation in Changning block, southern Sichuan Basin10.1016/j.ngib.2024.09.007 ↗
33. Wellbore instability in naturally fractured formations: Experimental study and 3D numerical investigation10.1016/j.jgsce.2024.205265 ↗
34. Study on the dynamic fracture behavior of anisotropic CCNBD shale specimens under different impact angles10.1016/j.tafmec.2024.104616 ↗
35. Complex rotation of maximum horizontal stress in the Wufeng-Longmaxi Shale on the eastern margin of the Sichuan Basin, China: Implications for predicting natural fractures10.1016/j.marpetgeo.2019.06.008 ↗
36. Complex in situ stress states in a deep shale gas reservoir in the southern Sichuan Basin, China: From field stress measurements to in situ stress modeling10.1016/j.marpetgeo.2022.105702 ↗
37. Simulation of three-dimensional tectonic stress fields and quantitative prediction of tectonic fracture within the Damintun Depression, Liaohe Basin, northeast China10.1016/j.jsg.2016.03.007 ↗
38. Quantitative prediction of fracture distribution of the Longmaxi formation in the Dingshan area, China using FEM numerical simulation10.1111/1755-6724.13815 ↗
39. Study of meso-damage characteristics of shale hydration based on CT scanning technology10.1016/s1876-3804(14)60029-x ↗
40. Fracability evaluation based on the three-dimensional geological numerical simulation of in situ stress: Case study of the Longmaxi formation in the Weirong shale gas field, southwestern China10.1007/s11004-022-10001-5 ↗
41. Application of rock physics modelling to investigate the differences between static and dynamic elastic moduli of carbonates10.1093/gji/ggaa280 ↗
42. Mechanisms of near-wellbore fracture growth considering the presence of cement sheath microcracks and their implications on wellbore stability10.1016/j.engfracmech.2024.110422 ↗
43. Deep/ultra-deep shale strength criterion: A case study of southern Sichuan Basin shale10.1016/j.geoen.2024.212918 ↗
44. 2019
45. Distribution law of in situ stress field and regional stress field assessments in the Jiaodong Peninsula, China10.1016/j.jseaes.2018.07.021 ↗
46. Formation mechanism of fault accommodation zones under combined stress in graben basin: Implications from geomechanical modeling10.1016/j.petsci.2023.08.021 ↗
47. How pore pressure changes affect stress and strain in fault zones with complex internal structure—Insights from hydromechanical modelling10.1016/j.jsg.2023.104847 ↗
48. Drilling risk analysis approach based on historical grey information of adjacent wells10.16265/j.cnki.issn1003-3033.2024.06.1575 ↗
49. Well bore breakouts and in situ stress10.1029/jb090ib07p05523 ↗
50. Characterization and modeling of fault zone fracture swarms and image log fracture interpretations
51. Identifying natural fractures in unconventional carbonate source rocks in Abu Dhabi by comparing borehole image logs and drilling parameters to 3D seismic fracture analysis techniques
52. Combining traditional core logging and televiewer imaging to target fractures for grouting purposes-advantages and disadvantages
53. A review on experimental techniques and their applications in the effects of mineral content on geomechanical properties of reservoir shale rock10.1016/j.rockmb.2024.100110 ↗
54. Rock mechanics and wellbore stability of deep shale during drilling and completion processes10.1016/j.petrol.2021.108882 ↗