Influence of hybrid nanofiller on elastic behavior and stiffness of basalt/E-glass MWCNTs/SiO2 hybrid nanocomposites

Sustainable material development techniques help in finding and employing sustainable materials without compromising quality. Composite materials are crucial in structural design, automotive manufacture, and aeronautical engineering. Advanced materials that use reinforcement and filler ingredients must be developed strategically to improve strength and performance. Hence, this study develops hybrid nanocomposites with hybrid nanofillers (MWCNTs and SiO2) and hybrid fibers (basalt and E-glass) and optimizes the competition to maximize elastic behavior and stiffness. Using a hand layup approach, composite samples were made by altering mass fractions of two filler materials (0%, 1%, 1.5%, and 2% by weight) and epoxy matrices (40%, 38%, 37%, and 36%). Shore D hardness and dynamic mechanical analysis (DMA) were used to evaluate the composites. The storage modulus, loss modulus, and damping coefficients are examined using DMA. Specifically, the largest storage modulus is 4.86 × 1010 Pa at 61 °C, while the peak loss modulus is 1.01 × 1010 Pa at 80 °C. The highest damping coefficient is 0.25. Note that 1.5% MWCNTs and SiO2 filler materials independently contribute to the excellent storage and loss modulus. However, an outstanding damping coefficient was achieved without filler materials. The highest achieved shore D hardness value is 88. Filler materials are used to achieve this high hardness.