Anti-corrosion application of parylene C film for stainless steel fasteners in electroplating industry
Source abstract
Abstract
Parylene C film was investigated for extending the service life of fasteners used in electroplating. A 10-μm-thick parylene C coating was applied to a 304 stainless steel surface through chemical vapor deposition, and an accelerated lifetime aging test was conducted by immersing the test pieces in a 60 °C copper sulfate solution. Electrochemical analysis was performed to evaluate the penetration of the film by the solution. Based on the experimental data, it was determined that the solution penetrated the metal surface between days 66 and 73, with a conservative estimate of 66 days as the benchmark for film failure. Following the 10° rule in ASTM F1980, this is equivalent to a film life of 2.04 years at room temperature (25 °C). Hence, a parylene C coating can effectively protect a substrate from corrosion in a copper sulfate solution and could extend the lifetime of fasteners used in electroplating.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Anodic Oxide Films and Nanostructures · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Some guidelines for the design, care & construction of plating racks
2. Graphene-based nanomaterials in the electroplating industry: A suitable choice for heavy metal removal from wastewater10.1016/j.chemosphere.2021.133448 ↗
3. Effect of copper sulfate and sulfuric acid on blind hole filling of HDI circuit boards by electroplating10.3390/ma14010085 ↗
4. Recovery of sulfuric acid from copper tank house electrolyte bleeds10.1016/s0304-386x(00)00081-5 ↗
5. An overview of the recovery of acid from spent acidic solutions from steel and electroplating industries10.1016/j.jhazmat.2009.06.099 ↗
6. ASSDA · 2014
7. Enhanced corrosion resistance of cold-sprayed and shot-peened aluminum coatings on LA43M magnesium alloy10.1016/j.surfcoat.2020.125865 ↗
8. A prolonged exposure of Ti-Si-B-C nanocomposite coating in 3.5 wt% NaCl solution: Electrochemical and morphological analysis10.1016/j.surfcoat.2019.07.039 ↗
9. Microfabrication process for long-term reliable neural electrode arrays using liquid crystal polymer (LCP)10.1016/j.mee.2019.111096 ↗
10. In vitro evaluation of the long-term stability of polyimide as a material for neural implants10.1016/j.biomaterials.2010.01.053 ↗
11. Lifetime assessment of atomic-layer-deposited Al2O3–Parylene C bilayer coating for neural interfaces using accelerated age testing and electrochemical characterization10.1016/j.actbio.2013.10.031 ↗
12. Investigation on Parylene-C based neural electrodes by accelerated life test and reliability improvement using polyimide flexible cable10.1016/j.cap.2022.05.001 ↗
13. Recent progress on parylene C polymer for biomedical applications: A review10.1016/j.porgcoat.2019.105493 ↗
14. Stability performance analysis of various packaging materials and coating strategies for chronic neural implants under accelerated, reactive aging tests10.3390/mi11090810 ↗
15. Defect filling method of sensor encapsulation based on micro-nano composite structure with parylene coating10.3390/s21041107 ↗
16. Plasma-assisted atomic layer deposition of Al2O3 and parylene C bi-layer encapsulation for chronic implantable electronics10.1063/1.4748322 ↗
17. Evaluation of sub-micrometer parylene C films as an insulation layer using electrochemical impedance spectroscopy10.1016/j.porgcoat.2013.11.020 ↗
18. A study on biocompatible polymer-based packaging of neural interface for chronic implantation10.3390/mi13040516 ↗
19. Wafer-level parylene packaging with integrated RF electronics for wireless retinal prostheses10.1109/jmems.2010.2049985 ↗
20. Bio-compatibility and bio-insulation of implantable electrode prosthesis ameliorated by A-174 Silane primed parylene-c deposited embedment10.3390/mi11121064 ↗
21. Silane–parylene coating for improving corrosion resistance of stainless steel 316L implant material10.1016/j.corsci.2010.09.034 ↗
22. American Society for Testing and Materials · 2021
23. Electrochemical impedance spectroscopy studies of polymer degradation: Application to biosensor development10.1016/j.trac.2004.08.010 ↗
24. Simple circuit equivalents for the constant phase element10.1371/journal.pone.0248786 ↗
25. Role of lanthanum nitrate in protective performance of PEO/epoxy double layer on AZ31 Mg alloy: Electrochemical and thermodynamic investigations10.1016/j.jiec.2017.04.027 ↗
26. Determination of diffusion coefficient of chloride in concrete using Warburg diffusion coefficient10.1016/j.corsci.2009.03.017 ↗
27. The influence of thermal history on structure and water transport in Parylene C coatings10.1016/j.polymer.2011.08.010 ↗