Adaptively switched time stepping scheme for direct aeroacoustic computations
Source abstract
Abstract
The physical variables involved in a flow field are of very different scales to those of the aeroacoustic field within the flow. Thus, direct aeroacoustic computations (DACs) require extremely small time steps to capture the fluctuations in the aeroacoustic field and stabilize the numerical scheme. As a result, the computation time for DACs can be very long. This paper describes an implicit Adaptively Switched Time Stepping (ASTS) scheme that enables the use of larger time steps when solving DAC problems. ASTS is based on the adaptive selection of the time stepping scheme according to the value of the residual. Early in the iteration process, an artificial time term is used to afford larger time steps while ensuring that the numerical scheme remains stable. Once the residual is less than some preset reference value, the artificial time term is removed, thus eliminating the Newton linearization error. Simulation results show that ASTS can reduce the computational cost of DACs by a factor of more than eight while maintaining the required level of accuracy.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aerodynamics and Acoustics in Jet Flows · Meteorological Phenomena and Simulations · Computational Fluid Dynamics and Aerodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Computational Fluid Dynamics Laboratory, Department of Computational Science, Graduate School of System Informatics, Kobe University 1 , 1-1 Rokkodai, Nada-ku, Kobe 657-8501, Japan
Complex Phenomena Unified Simulation Research Team, RIKEN, Advanced Institute for Computational Science 2 , Kobe, Japan
References (18)
Show source-provided references
1. Experimental and numerical investigation of the sound generation mechanisms of sibilant fricatives using a simplified vocal tract model10.1063/1.5013632 ↗
2. Flows around a cascade of flat plates with acoustic resonance10.1063/1.4825376 ↗
3. Low-dissipation and low-dispersion Runge–Kutta schemes for computational acoustics10.1006/jcph.1996.0052 ↗
4. A family of low dispersive and low dissipative explicit schemes for flow and noise computations10.1016/j.jcp.2003.09.003 ↗
5. Low-dissipation and low-dispersion fourth-order Runge–Kutta algorithm10.1016/j.compfluid.2005.04.003 ↗
6. A parallel implicit method for the direct numerical simulation of wall-bounded compressible turbulence10.1016/j.jcp.2005.10.017 ↗
7. Data-parallel lower-upper relaxation method for reacting flows10.2514/3.12303 ↗
8. Solution-limited time stepping to enhance reliability in CFD applications10.1016/j.jcp.2009.03.040 ↗
9. Impact of source terms on reliability of CFD algorithms10.1016/j.compfluid.2010.06.021 ↗
10. A compressible finite volume formulation for large eddy simulation of turbulent pipe flows at low Mach number in Cartesian coordinates10.1016/j.jcp.2004.08.005 ↗
11. A low-Mach number fix for Roe[R8S2Q1M7]s approximate Riemann solver10.1016/j.jcp.2011.03.025 ↗
12. Accurate, efficient and monotonic numerical methods for multi-dimensional compressible flows part II: Multi-dimensional limiting process10.1016/j.jcp.2005.02.022 ↗
13. Framework for simulation of natural convection in practical applications10.1016/j.icheatmasstransfer.2016.03.022 ↗
14. Building-cube method for large-scale, high resolution flow computations
15. CUBE: A scalable framework for large-scale industrial simulations10.1177/1094342018816377 ↗
16. Compressible direct numerical simulation with a hybrid boundary condition of transitional phenomena in natural convection10.1016/j.ijheatmasstransfer.2015.06.058 ↗
17. A high-order immersed interface method for simulating unsteady incompressible flows on irregular domains10.1016/j.jcp.2004.09.017 ↗
18. A high-order immersed boundary method for acoustic wave scattering and low-Mach number flow-induced sound in complex geometries10.1016/j.jcp.2010.10.017 ↗