The evaluation of machining performances and surface roughness of TZM-molybdenum superalloy processed by silicon carbide powder mixed EDM process using RSM and ANOVA

In the present era, the concept of Industry 4.0 plays a significant part in improving the efficiency, quality, and utilization of resources by automation and enabling intelligent operations in manufacturing processes. As a result, there is a requirement to develop an environment that improves efficiency as well as quality in order to accomplish net zero in manufacturing. The objective of powder mixed electric discharge machining (PMEDM) is to enhance the quality of the surface and machining efficiency of traditional electrical discharge machining. The PMEDM method was applied to TZM-molybdenum superalloy in the present investigation by incorporating silicon carbide particles into the dielectric medium. Powder concentration, peak current, pulse on time, pulse off time, and gap voltage were the considered input variables for the investigation. The impacts of the input variables on the surface of the specimen’s roughness and the rate of material removal (MRR) were examined. The experiment model was built using response surface methodology. To find out if the input factors were significant with regard to each response, an analysis of variance (ANOVA) was performed. Powder concentration, pulse current, gap voltage, and pulse on time are found to be the important input variables for both surface roughness and MRR based on ANOVA analysis.