Opportunities and challenges of bamboo fiber composites in additive manufacturing: A comprehensive review
Source abstract
Abstract
This study explores the transformative impact of three-dimensional printing, or additive manufacturing, in the development of bamboo-based 3D printing parts. Recently, there has been growing interest in incorporating natural fibers, such as bamboo, into polymers to enhance the structural integrity and strength of 3D-printed polymeric materials. This paper thoroughly examines the opportunities and obstacles associated with using additive manufacturing techniques to print bamboo fiber composites. This study includes an analysis of the mechanical properties, thermal properties, biodegradability, and environmental benefits of bamboo fiber composites. It also covers the processing methods and the printing parameters of bamboo fiber composites. This paper review focuses on the future prospects of bamboo fiber composites as a sustainable material in additive manufacturing based on the analysis of the existing literature and the recent research developments.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Natural Fiber Reinforced Composites · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Saveetha University 1 , Chennai, Tamil Nadu 602105, India
Department of Mechanical Engineering, Yeshwantrao Chavan College of Engineering 2 , Nagpur, Maharashtra, India
Aleksander Butlerov Institute of Chemistry, Kazan Federal University 3 , 1/29 Lobachevskogo Str., Kazan 420008, Russian Federation
Marwadi University Research Centre, Department of Mechanical Engineering, Faculty of Engineering and Technology, Marwadi University 4 , Rajkot 360003, Gujrat, India
Abai Kazakh National Pedagogical University 5 , Dostyk ave., 13, Almaty 050010, Republic of Kazakhstan
References (77)
Show source-provided references
1. Enhanced thermal stability, mechanical properties and structural integrity of MWCNT filled bamboo/Kenaf hybrid polymer nanocomposites10.3390/ma15020506 ↗
2. 2021
3. Additive manufacturing of polymer materials: Progress, promise and challenges10.3390/polym13050753 ↗
4. 2022
5. The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing10.1016/j.bushor.2017.05.011 ↗
6. Exploring the significant applications of internet of things (IoT) with 3D printing using advanced materials in medical field10.1016/j.matpr.2021.01.305 ↗
7. 3D printing for development of medical equipment amidst coronavirus (COVID-19) pandemic—Review and advancements10.1007/s42600-020-00098-0 ↗
8. A review on mechanical properties of bamboo fibre reinforced polymer composite
9. Bamboo-inspired, simulation-guided design and 3D printing of light-weight and high-strength mechanical metamaterials10.1016/j.apmt.2021.101268 ↗
10. Mechanical properties of bamboo fiber-reinforced polymer composites: A review of recent case studies10.1007/s10853-021-06854-6 ↗
11. A 3D printed bio-composite removable connection system for bamboo spatial structures10.1016/j.compstruct.2021.114047 ↗
12. 2021
13. Practices and roles of bamboo industry development for alleviating poverty in China10.1007/s10098-021-02074-3 ↗
14. Application of sustainable bamboo-based composite reinforcement in structural-concrete beams: Design and evaluation10.3390/ma13030696 ↗
15. The thermal properties of FDM printed polymeric materials: A review10.1016/j.polymdegradstab.2024.110902 ↗
16. A study on mechanical properties of bamboo fibre reinforced polymer composite10.1016/j.matpr.2019.11.100 ↗
17. Water absorption, thickness swelling and thermal properties of roselle/sugar palm fibre reinforced thermoplastic polyurethane hybrid composites10.1016/j.jmrt.2019.07.007 ↗
18. Effect of silver nanopowder on mechanical, thermal and antimicrobial properties of kenaf/HDPE composites10.3390/polym13223928 ↗
19. Comparative study on chemical composition, physical, tensile, and thermal properties of sugar palm fibre (Arenga pinnata) obtained from different geographical locations10.15376/biores.12.4.9366-9382 ↗
20. A comprehensive review on advanced sustainable woven natural fibre polymer composites10.3390/polym13030471 ↗
21. Mechanical performance of roselle/sugar palm fiber hybrid reinforced polyurethane composites10.15376/biores.13.3.6238-6249 ↗
22. 2017
23. Sugar palm (Arenga pinnata (Wurmb.) Merr) cellulosic fibre hierarchy: A comprehensive approach from macro to nano scale10.1016/j.jmrt.2019.04.011 ↗
24. Post-buckling of bamboo reinforced composite plates10.1088/1757-899X/1051/1/012040 ↗
25. The effect of water immersion and fibre content on properties of corn husk fibres reinforced thermoset polyester composite10.1016/j.polymertesting.2020.106751 ↗
26. Potential application of green composites for cross arm component in transmission tower: A brief review10.1155/2020/8878300 ↗
27. A review on the tensile properties of bamboo fiber reinforced polymer composites10.15376/biores.11.4.shah ↗
28. Review on connections for original bamboo structures10.32604/jrm.2019.07647 ↗
29. Mercerization optimization of bamboo (Bambusa vulgaris) fibre-reinforced epoxy composite structures using a box–Behnken design10.3390/polym12061367 ↗
30. Effects of surface modification on the physical, mechanical, and thermal properties of bamboo-polypropylene composites10.15376/biores.15.3.6230-6243 ↗
31. An experimental study of physical, mechanical, and thermal properties of rattan-bamboo fiber reinforced hybrid polyester laminated composite10.1080/15440478.2020.1818354 ↗
32. A comparative study of polylactic acid (PLA)-based unidirectional green hybrid composites reinforced with natural fibers such as kenaf, bamboo and coir10.1016/j.hybadv.2023.100073 ↗
33. Interfacial compatibilization via in-situ polymerization of epoxidized soybean oil for bamboo fibers reinforced poly(lactic acid) biocomposites10.1016/j.compositesa.2020.106066 ↗
34. Effects of bamboo cellulose nanowhisker content on the morphology, crystallization, mechanical, and thermal properties of PLA matrix biocomposites10.1016/j.compositesb.2017.09.040 ↗
35. Mechanical and thermal properties of bamboo fiber reinforced polypropylene/polylactic acid composites for 3D printing10.1002/pen.25043 ↗
36. Thermal properties and crystallization behaviors of polylactide/redwood flour or bamboo fiber composites10.1007/s13726-017-0508-2 ↗
37. Thermal and mechanical properties of bamboo fiber reinforced composites10.1016/j.mtcomm.2019.100876 ↗
38. Thermal and mechanical properties of bamboo fiber reinforced epoxy composites10.3390/polym10060608 ↗
39. Bamboo fiber based cellulose nanocrystals/poly(lactic acid)/poly(butylene succinate) nanocomposites: Morphological, mechanical and thermal properties10.3390/polym13071076 ↗
40. Mechanical and biodegradation properties of bamboo fiber-reinforced starch/polypropylene biodegradable composites10.1002/app.48694 ↗
41. Biodegradable polymers/bamboo fiber biocomposite with bio-based coupling agent10.1016/j.compositesa.2005.04.015 ↗
42. Are bamboo construction materials environmentally friendly? A life cycle environmental impact analysis10.1016/j.eiar.2022.106853 ↗
43. Bamboo reinforced polymer composite - A comprehensive review10.1088/1757-899x/344/1/012008 ↗
44. Bamboo fibre reinforced biocomposites: A review10.1016/j.matdes.2012.06.015 ↗
45. Study on how to effectively extract bamboo fibers from raw bamboo and wastewater treatment10.5539/jmsr.v1n1p144 ↗
46. State of art of review on bamboo reinforced concrete10.1016/j.matpr.2020.03.159 ↗
47. Chemical composition of processed bamboo for structural applications10.1007/s10570-018-1789-0 ↗
48. Eur. J. Wood Prod. · 2019 · 77 · 73110.1007/s00107-019-01426-7 ↗
49. Enzymatic biocatalysis of bamboo chemical constituents to impart antimold properties10.1007/s00226-018-0987-0 ↗
50. Erratum to: Effects of peeling and steam-heating treatment on basic properties of two types of bamboo culms
51. Effects of heat treatments on photoaging properties of Moso bamboo (Phyllostachys pubescens Mazel)10.1007/s00226-018-1042-x ↗
52. Effects of hydrogen peroxide treatment on the surface properties and adhesion of ma bamboo (Dendrocalamus latiflorus)10.1007/s10086-005-0730-y ↗
53. Effect of UV-C treatment on modulating antioxidative system and proline metabolism of bamboo shoots subjected to chilling stress10.1007/s11738-015-1995-4 ↗
54. Wett ability of oil heat-treated bamboo and bonding strength of laminated bamboo board10.1016/j.indcrop.2015.02.008 ↗
55. 3D printed sensors for biomedical applications: A review10.3390/s19071706 ↗
56. Effect of infill density in FDM 3D printing on low-cycle stress of bamboo-filled PLA-based material10.3390/polym14224930 ↗
57. Development in additive manufacturing techniques10.1007/978-3-030-89401-6_2 ↗
58. Reinforcement ability of lignocellulosic components in biocomposites and their 3D printed applications – A review10.1016/j.jcomc.2021.100171 ↗
59. Selective laser sintering (SLS) 3D printing of medicines10.1016/j.ijpharm.2017.06.082 ↗
60. High-performance medical-grade resin radically reinforced with cellulose nanofibers for 3D printing10.1016/j.jmbbm.2022.105408 ↗
61. Mechanical performance of 3D-printed biocompatible polycarbonate for biomechanical applications10.3390/polym13213669 ↗
62. FDM-based 3D printing of polymer and associated composite: A review on mechanical properties, defects and treatments10.3390/polym12071529 ↗
63. Optimization of printing parameters of 3D-printed continuous glass fiber reinforced polylactic acid composites10.1016/j.tws.2021.107717 ↗
64. Study on the preparation of bamboo plastic composite intend for additive manufacturing10.4028/www.scientific.net/kem.667.250 ↗
65. Surface quality of 3D-printed models as a function of various printing parameters10.3390/ma12121970 ↗
66. Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers10.1016/j.compositesb.2017.05.013 ↗
67. Study on optimization of 3D printing parameters10.1088/1757-899x/392/6/062050 ↗
68. Low-cycle fatigue behavior of 3D-printed PLA reinforced with natural filler10.3390/polym14071301 ↗
69. An investigation into 3D printing of fibre reinforced thermoplastic composites10.1016/j.addma.2018.04.039 ↗
70. Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling10.1016/j.polymertesting.2018.04.038 ↗
71. Selective laser sintering of SiC/polyamide composites10.1016/s0007-8506(07)60558-7 ↗
72. Impact of strain rate on mechanical properties of polylatic acid fabricated by fusion deposition modeling10.1002/pat.6335 ↗
73. On the difference in material structure and fatigue properties of nylon specimens produced by injection molding and selective laser sintering10.1016/j.polymertesting.2013.04.014 ↗
74. Van Hooreweder · Polymers · 2021 · 13 · 140710.3390/polym13091407 ↗
75. Highly oriented carbon fiber–polymer composites via additive manufacturing10.1016/j.compscitech.2014.10.009 ↗
76. Bamboo shoot and its food applications in last decade: An undervalued edible resource from forest to feed future people10.1016/j.tifs.2024.104399 ↗
77. Bamboo as a substitute for plastic: Research on the application performance and influencing mechanism of bamboo buttons10.1016/j.jclepro.2024.141297 ↗