The dielectric properties of silicone-multiwall carbon nanotubes nanocomposite in the frequency range from 0.5 to 20 GHz
Source abstract
Abstract
Integrating carbon nanotubes (CNTs) into a polymer matrix can significantly modify its physical properties, providing that the challenges associated with CNT dispersion are successfully resolved. In this work, we investigate the enhancement of the dielectric properties of silicone when multiwall carbon nanotubes (MWCNTs) are introduced to its polymer matrix as a filler in the frequency range from 0.5 to 20 GHz. An optimized procedure is used to prepare nanocomposites with MWCNTs concentrations by weight of 0%, 0.5%, 1.0%, 1.5%, and 2.0%. The investigated dielectric properties for the prepared nanocomposites are the real dielectric constant ɛ′, the imaginary dielectric constant ɛ″, the loss tangent tan δ, and the AC conductivity σAC. The dispersion of the MWCNTs in the silicone matrix is confirmed using the Fourier-transform infrared (FTIR) spectroscopy and the scanning electron microscope. This study shows that the dielectric properties of the nanocomposite are enhanced as the MWCNT’s concentration is increased over the entire frequency range. For example, the enhancement in ɛ′ value was from 3.2 up to 21.6 at 0.5 GHz and from 2.5 to 10.6 at 20 GHz as the concentration increased from 0% to 2.0%. For the ɛ″ value, the enhancement was from less than 0.1 to 8.6 at 0.5 GHz and to 2.0 at 20 GHz, respectively. Based on the obtained tanδ values, the nanocomposites with MWCNTs of 0.5% and 1.0% can be classified as low-loss dielectrics, while the other nanocomposites with MWCNTs of 1.5% and 2.0% are classified as lossy dielectrics.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Electromagnetic wave absorption materials · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Physics, Mutah University , Mutah, Alkarak 61710, Jordan
References (59)
Show source-provided references
1. Helical microtubules of graphitic carbon10.1038/354056a0 ↗
2. Silicone/carbon nanotube sheet biofidelic piezoresistive sandwich composites10.1115/1.4044649 ↗
3. Selective laser sintering of polydimethylsiloxane composites10.1089/3dp.2021.0105 ↗
4. Mechanical pressure characterization of CNT-graphene composite material10.3390/mi11111000 ↗
5. Grafting carbon nanotubes directly onto carbon fibers for superior mechanical stability: Towards next generation aerospace composites and energy storage applications10.1016/j.carbon.2015.10.002 ↗
6. Polyaniline/multi-walled carbon nanotube composites with core–shell structures as supercapacitor electrode materials10.1016/j.electacta.2010.02.022 ↗
7. Carbohydrate polymer derived nanocomposites: Design, features and potential for biomedical applications10.1080/25740881.2022.2121221 ↗
8. Carbon nanotubes for photovoltaics: From lab to industry10.1002/aenm.202002880 ↗
9. Carbon nanotube–reinforced polymer composite for electromagnetic interference application: A review10.1515/ntrev-2020-0064 ↗
10. Development of a new radiation detector utilizing carbon nanotube as anode10.1016/j.physe.2007.06.044 ↗
11. The effect of multi-wall carbon nanotubes addition on the shielding properties against gamma radiation10.26565/2312-4334-2023-3-60 ↗
12. Carbon-based radar absorbing materials: A critical review10.1016/j.jsamd.2022.100454 ↗
13. Dielectric properties of single wall carbon nanotubes-based gelatin phantoms10.1142/s2010135x18500108 ↗
14. Carbon nanotubes reinforced with natural/synthetic polymers to mimic the extracellular matrices of bone—A review10.1016/j.mtchem.2020.100420 ↗
15. Carbon nanotube-gelatin-hydroxyapatite nanohybrids with multilayer core-shell structure for mimicking natural bone10.1016/j.carbon.2014.05.041 ↗
16. Carbon nanotube-based nanocomposites and their applications10.1080/01694243.2017.1295625 ↗
17. Review of applications of polymer/carbon nanotubes and epoxy/CNT composites10.1080/03602559.2016.1163588 ↗
18. Enhanced dielectric performance of polydimethylsiloxane-based ternary composites films via tailored hydrogen bonds between carbon nanotube and barium titanate as modified fillers10.1002/vnl.21879 ↗
19. Silicone sealants and structural adhesives10.1016/s0143-7496(01)00018-5 ↗
20. Silicone rubber10.1007/978-94-017-2925-3_13 ↗
21. 4—Advances in structural silicone adhesives
22. 7—Silicones
23. Silicones with different crosslinking patterns: Assessment from the perspective of their suitability for biomaterials10.1016/j.surfin.2022.102168 ↗
24. Enhanced dielectric performance of PDMS-based three-phase percolative nanocomposite films incorporating a high dielectric constant ceramic and conductive multi-walled carbon nanotubes10.1039/c8tc03868f ↗
25. A new nanoparticle-reinforced silicone rubber composite integrating high strength and strong adhesion10.1016/j.compositesa.2021.106645 ↗
26. The effect of filler dimensionality on the electromechanical performance of polydimethylsiloxane based conductive nanocomposites for flexible strain sensors10.1016/j.compscitech.2016.12.014 ↗
27. Dielectric properties of multiwall carbon nanotube-red silicone rubber composites
28. Dielectric properties of composites containing silicone rubber and multiwall carbon nanotubes decorated with gold
29. Synergistically toughened silicone rubber nanocomposites using carbon nanotubes and molybdenum disulfide for stretchable strain sensors10.1016/j.compositesb.2023.110759 ↗
30. Carbon nanotubes-bridged-fumed silica as an effective binary nanofillers for reinforcement of silicone elastomers10.1016/j.compscitech.2018.11.006 ↗
31. Microstructure and fractography of multiwalled carbon nanotube reinforced unsaturated polyester nanocomposites10.1002/pc.23911 ↗
32. Electrically conductive PDMS-grafted CNTS-reinforced silicone elastomer10.1016/j.compscitech.2018.02.018 ↗
33. Effect of aspect ratio of multi-wall carbon nanotubes on the dispersion in ethylene-α-octene block copolymer and the properties of the nanocomposites10.1007/s10965-019-1915-1 ↗
34. Characterizations of MWCNTs nanofluids on the effect of surface oxidative treatments10.3390/nano12071071 ↗
35. Improved dispersion of carbon nanotubes in polymers at high concentrations10.3390/nano2040329 ↗
36. Electrical and mechanical properties of flexible multiwalled carbon nanotube/poly (dimethylsiloxane) based nanocomposite sheets10.1016/j.jece.2021.106550 ↗
37. Novel surfactant-induced MWCNTs/PDMS-based nanocomposites for tactile sensing applications10.3390/ma15134504 ↗
38. Effects of ultrasonication time on stability, dynamic viscosity, and pumping power management of MWCNT-water nanofluid: An experimental study10.1038/s41598-020-71978-9 ↗
39. 2017
40. Polydimethylsiloxane membranes containing multi-walled carbon nanotubes for gas separation10.1590/1980-5373-mr-2016-0825 ↗
41. Investigation on permeation properties of liquids into HTV silicone rubber materials10.1109/tdei.2014.004476 ↗
42. Suppression of surface charge on micro- and nano-structured superhydrophobic silicone rubber10.1109/tdei.2018.007008 ↗
43. Failure analysis of a field brittle fracture composite insulator: Characterization by FTIR analysis and fractography10.1109/tdei.2018.006928 ↗
44. Decay-like fracture mechanism of silicone rubber composite insulator10.1109/tdei.2018.006773 ↗
45. RTV silicone rubber degradation induced by temperature cycling10.3390/en10071054 ↗
46. Antibacterial glass films prepared on metal surfaces by sol-gel method10.1007/s10971-010-2298-2 ↗
47. Dynamic behavior of nanocomposites reinforced with multi-walled carbon nanotubes (MWCNTs)10.3390/ma6062274 ↗
48. Influence of functionalization on properties of MWCNT–epoxy nanocomposites10.1016/j.msea.2010.09.095 ↗
49. Enhanced thermal conductivity of flexible cotton fabrics coated with reactive MWCNT nanofluid for potential application in thermal conductivity coatings and fire warning10.1007/s10570-019-02592-w ↗
50. Reinforcement of single-walled carbon nanotubes on polydimethylsiloxane membranes for CO2, O2, and N2 permeability/selectivity10.1007/s11356-023-26962-x ↗
51. Dispersion of carbon nanotubes: Mixing, sonication, stabilization, and composite properties10.3390/polym4010275 ↗
52. A solvent dispersion method for the preparation of silicone composites filled with carbon nanotubes
53. Interface bridging of multiwalled carbon nanotubes in polylactic acid/poly(butylene adipate-co-terephthalate): Morphology, rheology, and electrical conductivity10.1021/acs.macromol.0c01525 ↗
54. 2014
55. Synthesis and characterization of CoFe2O4/MWCNTs nanocomposites and high-frequency analysis of their dielectric properties10.1007/s11665-020-04572-9 ↗
56. Achieving polydimethylsiloxane/carbon nanotube (PDMS/CNT) composites with extremely low dielectric loss and adjustable dielectric constant by sandwich structure10.1063/1.5016543 ↗
57. Microwave penetration depth in materials with non-zero magnetic susceptibility10.2355/isijinternational.50.1590 ↗
58. RTV silicone rubber composites reinforced with carbon nanotubes, titanium-di-oxide and their hybrid: Mechanical and piezoelectric actuation performance10.1016/j.nanoms.2020.12.002 ↗
59. Structure and electrical characteristics of poly(vinylidene fluoride) filled with beta silicon carbide nanoparticles10.1166/jnn.2011.4153 ↗