Theoretical analysis of annular thermoelectric generators made of functionally graded materials
Source abstract
Abstract
In this study, the temperature field distribution and thermoelectric conversion efficiency of annular thermoelectric (TE) generators with functionally graded materials (FGMs) are investigated. The power series method is employed for solving a linear differential equation with variable coefficients to obtain temperature distribution, which has been proved to have good convergence and high precision. Numerical studies are carried out on FGM TE generators with linear and exponential variation, respectively. Material parameters that vary dependently and independently are discussed. If the figure of merit parameter Z keeps constant, then increases in the maximal conversion efficiency are not obvious. If material parameters vary independently, then the Seebeck coefficient increases from the cold temperature end to the hot temperature end and the maximal efficiency reaches 17.86%, which increases by 25.86% over 14.19% of homogeneous materials. For temperature-dependent TE materials, the problem could also be simplified to a functionally graded problem by presupposing an initial temperature field distribution. All these results give theoretical guidance for optimization of annular TE generators by using functionally graded structures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Civil Engineering and Architecture, Xi’an University of Technology , Xi’an 710048, China
Funding
National Natural Science Foundation of China
References (36)
Show source-provided references
1. Thermoelectric generators: A review of applications10.1016/j.enconman.2017.02.070 ↗
2. A review of thermoelectrics research-recent developments and potentials for sustainable and renewable energy applications10.1016/j.rser.2013.12.053 ↗
3. Recent development and application of thermoelectric generator and cooler10.1016/j.apenergy.2014.12.075 ↗
4. Macro-performance of multilayered thermoelectric medium10.1088/1674-1056/26/12/127307 ↗
5. Optimization of thermoelectric generator module spacing and spreader thickness used in a waste heat recovery system10.1016/j.applthermaleng.2012.10.024 ↗
6. Solar micro-energy harvesting based on thermoelectric and latent heat effects. Part I: Theoretical analysis10.1016/j.sna.2010.06.026 ↗
7. The performance of a combined solar photovoltaic (PV) and thermoelectric generator (TEG) system10.1016/j.solener.2015.07.035 ↗
8. Solar hybrid systems with thermoelectric generators10.1016/j.solener.2011.10.020 ↗
9. Cogeneration solar system using thermoelectric module and Fresnel lens10.1016/j.enconman.2014.04.041 ↗
10. Simulation and evaluation of a CCHP system with exhaust gas deep-recovery and thermoelectric generator10.1016/j.enconman.2014.06.036 ↗
11. Start-up modes of thermoelectric generator based on vehicle exhaust waste heat recovery10.1016/j.apenergy.2014.10.062 ↗
12. Waste heat recovery of a diesel engine using a thermoelectric generator equipped with customized thermoelectric modules10.1016/j.enconman.2016.07.013 ↗
13. Wearable thermoelectric generators for human body heat harvesting10.1016/j.apenergy.2016.08.150 ↗
14. A review of the state of the science on wearable thermoelectric power generators (TEGs) and their existing challenges10.1016/j.rser.2017.01.177 ↗
15. Flexible thermoelectric generator for human body heat energy harvesting10.1049/el.2012.1566 ↗
16. Continuous functionally graded material to improve the thermoelectric properties of ZnO10.1016/j.jeurceramsoc.2017.07.019 ↗
17. High performance functionally graded and segmented Bi2Te3-based materials for thermoelectric power generation10.1023/a:1016092224833 ↗
18. Design of segmented thermoelectric generator based on cost-effective and high-weight thermoelectric alloys10.1016/j.mseb.2014.02.005 ↗
19. Thermal analysis on a segmented thermoelectric generator10.1016/j.energy.2014.11.080 ↗
20. Functional graded thermoelectric generator and cooler elements
21. Inhomogeneous thermoelectric10.1063/1.349091 ↗
22. Functionally graded materials for sensor and energy applications10.1016/s0921-5093(03)00581-1 ↗
23. Energy conversion efficiency of an exponentially graded thermoelectric material10.1007/s11664-013-2868-5 ↗
24. Efficiency of a sandwiched thermoelectric material with a graded interlayer and temperature-dependent properties10.1007/s11664-016-4358-z ↗
25. Improving compatibility between thermoelectric components through current refraction10.1088/1674-1056/27/7/077304 ↗
26. Thermoelectric properties of paracostibite fabricated using chemically synthesized Co–Sb–S nanoparticles as building blocks10.1063/5.0012463 ↗
27. Nonlinear study of tearing modes and plasma flows around magnetic islands in tokamak plasmas10.1063/5.0013209 ↗
28. Analysis of annular thermoelectric couples with nonuniform temperature distribution by means of 3-D multiphysics simulation10.1007/s11664-012-2360-7 ↗
29. Theoretical analysis on the performance of annular thermoelectric couple10.1016/j.enconman.2014.09.071 ↗
30. Theoretical analysis on a segmented annular thermoelectric generator10.1016/j.energy.2018.05.163 ↗
31. Enhancement of thermal properties of ytterbium-cerium oxide by zirconium doping for thermal barrier coatings10.1080/09500839.2019.1677956 ↗
32. A theoretical model of effective electrical conductivity and piezoresistivity of carbon nanotube composites10.1080/09500839.2018.1453618 ↗
33. Analysis of thermoelectric generators with general material property variations10.1007/s11664-018-06903-y ↗
34. Power series iterative approximation solution to the temperature field in thermoelectric generators made of a functionally graded temperature-dependent material10.1007/s11664-020-08270-z ↗
35. Theoretical analysis of temperature field and thermoelectric efficiency of cylindrical thermoelectric generators
36. Performance optimization of a thermoelectric generator element with linear, spatial material profiles in a one-dimensional setup10.1557/jmr.2011.91 ↗