A survey of MEMS cantilever applications in determining volatile organic compounds
Source abstract
Abstract
Recently, microelectromechanical system (MEMS) cantilevers have received significant interest in the domain of Volatile Organic Compounds (VOCs). An analysis of MEMS cantilevers in VOCs is presented in this Review. It examines the different forms of sensors used to detect VOCs. It goes into the conditions that influence MEMS and the strategies used for VOC sensing. It examines research on MEMS cantilevers and other VOC sensing and detection techniques. It shows how MEMS can be used to detect VOCs. Moreover, it presents a comparative study based on the objectives, types of sensors employed, merits, and shortcomings of existing works. This Review intends to explore MEMS cantilevers in VOCs for supporting further research and applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Chemical Sensor Technologies · Gas Sensing Nanomaterials and Sensors · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Electrical Electronics and Communication Engineering, GITAM Deemed to be University , Visakhapatnam, India
References (69)
Show source-provided references
1. A low-power and wide-range MEMS capacitive sensors interface IC using pulse-width modulation for biomedical applications10.1109/jsen.2016.2587668 ↗
2. MEMS sensor technologies for human centred applications in healthcare, physical activities, safety and environmental sensing: A review on research activities in Italy10.3390/s150306441 ↗
3. MEMS impedance flow cytometry designs for effective manipulation of micro entities in health care applications10.1016/j.bios.2019.111526 ↗
4. Towards miniaturization of a MEMS-based wearable motion capture system10.1109/tie.2011.2148671 ↗
5. MEMS devices for active drag reduction in aerospace applications10.1533/9780857096487.2.153 ↗
6. Design, development, fabrication, packaging, and testing of MEMS pressure sensors for aerospace applications10.1007/978-81-322-1913-2_1 ↗
7. A MEMS-based solid propellant microthruster array for space and military applications10.1088/1742-6596/660/1/012137 ↗
8. MEMS inertial switch for military applications10.3390/proceedings1040343 ↗
9. Micro electromechanical systems (MEMS) based microfluidic devices for biomedical applications10.3390/ijms12063648 ↗
10. Recent advances in MEMS sensor technology–biomedical applications10.1109/mim.2012.6145254 ↗
11. A water-tight packaging of MEMS electrostatic actuators for biomedical applications10.1007/s00542-010-1136-3 ↗
12. Design and applications of MEMS flow sensors: A review10.1016/j.sna.2019.06.020 ↗
13. MEMS microcantilevers sensor modes of operation and transduction principles
14. Design of MEMS based micro cantilever10.13140/RG.2.2.15930.54720 ↗
15. Design, simulation and fabrication of piezoresistive microcantilevers using standard multiuser MEMS process10.1007/s41683-017-0008-9 ↗
16. Continuous monitoring of air purification: A study on volatile organic compounds in a gas cell10.3390/s20030934 ↗
17. A review of the most important failure, reliability, and nonlinearity aspects in the development of microelectromechanical systems (MEMS)10.1108/mi-03-2015-0026 ↗
18. Vibration and shock reliability of MEMS: Modeling and experimental validation10.1088/0960-1317/21/4/045022 ↗
19. Assessing the dynamic failure response of MEMS structures10.1108/17579861311321681 ↗
20. Shock reliability of vacuum-packaged piezoelectric vibration harvester for automotive application10.1109/jmems.2013.2291010 ↗
21. Performance analysis of cantilever-based MEMS sensor for environmental applications
22. Highly reliable MEMS temperature sensors for 275 °C applications—Part 2: Creep and cycling performance10.1109/jmems.2012.2227948 ↗
23. D. M. Tanner, N. F. Smith, L. W. Irwin, W. P. Eaton, K. S. Helgesen, J. J. Clement, and K. A. Peterson, “MEMS reliability: Infrastructure, test structures, experiments, and failure modes,” Report No. SAND2000-0091, Sandia National Laboratory, Albuquerque, NM; Livermore, CA, 2000.10.2172/750344 ↗
24. Design of a basic piezoresistive microcantilever biosensor
25. Piezoresistance effect in germanium and silicon10.1103/physrev.94.42 ↗
26. Development of diamond and silicon MEMS sensor arrays with integrated readout for vapor detection10.3390/s17061163 ↗
27. Advanced micro-and nano-gas sensor technology: A review10.3390/s19061285 ↗
28. HKUST-1 coated piezoresistive microcantilever array for volatile organic compound sensing10.1049/mnl.2013.0390 ↗
29. Highly piezoresistive hybrid MEMS sensors10.1016/j.sna.2014.01.037 ↗
30. A micropreconcentrator combined olfactory sensing system with a micromechanical cantilever sensor for detecting 2,4-dinitrotoluene gas vapor10.3390/s150818167 ↗
31. Determination of composition of ethanol-CO2 mixtures at high pressures using frequency response of microcantilevers10.1016/j.supflu.2017.03.027 ↗
32. Oxidative stress detection by MEMS cantilever sensor array based electronic nose10.1063/1.5033306 ↗
33. Fabrication and testing of polymer cantilevers for VOC sensor10.1016/j.proeng.2012.09.162 ↗
34. Gas sensor application of piezoelectric cantilever nanobalance; electrical signal read-out10.1080/00150190500311060 ↗
35. Mass-sensitive detection of gas-phase volatile organics using disk microresonators10.1021/ac1029902 ↗
36. Numerical modeling and experimental validation by calorimetric detection of energetic materials using thermal bimorph microcantilever array: A case study on sensing vapors of volatile organic compounds (VOCs)10.3390/s150921785 ↗
37. A polymer-Metglas sensor used to detect volatile organic compounds10.1016/j.sna.2010.01.020 ↗
38. Design and analysis of SAW based MEMS gas sensor for the detection of volatile organic gases
39. Nanoenabled microelectromechanical sensor for volatile organic chemical detection10.1063/1.3151919 ↗
40. Application of pulsed digital oscillators to volatile organic compounds sensing10.1016/j.snb.2008.06.031 ↗
41. Gas chromatography analysis with olfactometric detection (GC-O) as a useful methodology for chemical characterization of odorous compounds10.3390/s131216759 ↗
42. Proton-transfer-reaction mass spectrometry (PTR–MS): On-line monitoring of volatile organic compounds at pptv levels10.1039/a827347z ↗
43. Selected ion flow tube mass spectrometry for on-line trace gas analysis in biology and medicine10.1255/ejms.843 ↗
44. Breath analysis using laser spectroscopic techniques: Breath biomarkers, spectral fingerprints, and detection limits10.3390/s91008230 ↗
45. On-line analysis of coffee roasting with ion mobility spectrometry–mass spectrometry (IMS–MS)10.1016/j.ijms.2017.11.017 ↗
46. Characterization of the gas sensors based on polymer-coated resonant microcantilevers for the detection of volatile organic compounds10.1016/j.aca.2010.05.007 ↗
47. Detection of hazardous volatile organic compounds (VOCs) by metal oxide nanostructures-based gas sensors: A review10.1016/j.ceramint.2016.06.145 ↗
48. Progress in the development of semiconducting metal oxide gas sensors: A review10.1088/1361-6501/aa7443 ↗
49. A review on chemiresistive room temperature gas sensors based on metal oxide nanostructures, graphene and 2D transition metal dichalcogenides10.1007/s00604-018-2750-5 ↗
50. Synergistic effects in gas sensing semiconducting oxide nano-heterostructures: A review10.1016/j.snb.2019.01.049 ↗
51. A hybrid electronic nose and tongue for the detection of ketones: Improved sensor orthogonality using graphene oxide-based detectors10.1109/jsen.2017.2661067 ↗
52. Artificial sensing intelligence with silicon nanowires for ultraselective detection in the gas phase10.1021/nl404335p ↗
53. Sensory arrays of covalently functionalized single-walled carbon nanotubes for explosive detection10.1002/adfm.201300131 ↗
54. Robust cyclohexanone selective chemiresistors based on single-walled carbon nanotubes10.1021/ac400808h ↗
55. Microcantilever sensors coated with a sensitive polyaniline layer for detecting volatile organic compounds10.1166/jnn.2014.9348 ↗
56. Fabrication of ZnO nanorods on MEMS piezoresistive silicon microcantilevers for environmental monitoring10.3390/proceedings1040290 ↗
57. Design of MEMS cantilever sensors for identification of VOCs using IntelliSuite10.1016/j.matpr.2020.03.453 ↗
58. Fabrication of 1D ZnO nanostructures on MEMS cantilever for VOC sensor application10.1016/j.snb.2014.05.078 ↗
59. MEMS piezoresitive cantilever mass sensor response for detection of volatile organic compounds using omnicant experimental platform10.35940/ijrte.B3540.098319 ↗
60. C. J. Carron, “Development of MEMS-based chemical pre-concentrators with integrated sensing units for analysis of gas-phase volatile organic compounds,” Ph.D. dissertation (Georgia Institute of Technology, 2015).
61. Polymer-coated MEMS chemical sensor array for monitoring oxidative stress by breath analysis
62. Poly(3-methylthiophene) thin films deposited electrochemically on QCMs for the sensing of volatile organic compounds10.3390/s16040423 ↗
63. Gas discrimination using screen-printed piezoelectric cantilevers coated with carbon nanotubes10.1016/j.snb.2016.07.163 ↗
64. VOC sensing using batch-fabricated temperature compensated self-leveling microstructures10.1016/j.snb.2020.127817 ↗
65. MEMS-based ionization gas sensors for VOCs with array of nanostructured silicon needles10.1021/acssensors.9b02458 ↗
66. Integrated microfluidic gas sensor for detection of volatile organic compounds in water10.1016/j.snb.2006.03.023 ↗
67. Detection of volatile-organic-compounds (VOCs) in solution using cantilever-based gas sensors10.1016/j.talanta.2018.01.086 ↗
68. Review of gravimetric sensing of volatile organic compounds10.1021/acssensors.0c00333 ↗
69. Currently commercially available chemical sensors employed for detection of volatile organic compounds in outdoor and indoor air10.3390/environments4010021 ↗