journal article·2021-08-01Open access

Significance of non-similar modeling in the entropy analysis of chemically reactive magnetized flow of nanofluid subjected to thermal radiations and melting heat condition

Jifeng Cui, Musawara Safeer, Umer Farooq, Mohammed Elamin Ahmed Rabie, Taseer Muhammad

AIP Advances· Volume 11· Issue 8

Abstract

Melting is a physical development that is associated with phase transition of materials (PCM). Melting thermal transport has fascinated researchers because of its immense usage in technological processes. In this paper, a non-similar mathematical model is established for melting aspects in the chemically reactive, radiative flow of magnetized nanofluid. The fluid flow over a vertically heated surface is triggered as a result of its linear stretching and by means of buoyancy forces. The considered setup deals with the melting thermal transport and velocity slip at the surface. The linear buoyancy in the framework of concentration and temperature is accounted for in the x-momentum equation. Frictional heating in view of viscous dissipation is convincing because of large surface velocity. An effective Buongiorno model is employed in the energy and concentration expressions with chemical reaction and magnetic and viscous dissipations. The dimensionless non-similar structure is numerically simulated by adopting local non-similarity via bvp4c. The repercussion of vital numbers on flow, entropy generation, and thermal and mass transport is discussed through graphs and tables. The graphical transport analysis suggests that the increase in buoyancy reduces the fluid flow; however, the implication of increasing velocity slip and magnetic and buoyancy ratio numbers is to enhance the fluid flow. Furthermore, the increasing radiative parameter increases the temperature in the thermal boundary layer. Concentration boundary layer analysis suggests that the impact of the increase in the Schmidt number increases the concentration and the increase in the chemical reaction decreases the concentration. The range of stable solutions for important numbers is obtained. Furthermore, the validity of results is demonstrated by comparing with the existing literature. Comparison between non-similar and local similar approximations has been made. It is finally accomplished that non-similar analysis, contrary to local similar models, is more generic and authentic in convection thermal transport analysis in the existence of buoyancy and viscous dissipation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Nanofluid Flow and Heat Transfer · Fluid Dynamics and Turbulent Flows · Heat Transfer Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Science, Inner Mongolia University of Technology 1 , Hohhot 010051, People’s Republic of China

COMSATS University Islamabad 2 , Park Rd., Islamabad Capital Territory 45550, Pakistan

Department of Mathematics, Faculty of Science and Humanities, Afif, Shaqra University 3 , Shaqra, Saudi Arabia

Department of Mathematics, College of Sciences, King Khalid University 4 , Abha 61413, Saudi Arabia

Funding

Natural Science Foundation of Inner Mongolia · National Natural Science Foundation of China

References (56)

Show source-provided references
1. Alteration of thermal conductivity and viscosity of liquid by dispersing ultra-fine particles10.2963/jjtp.7.227 ↗
2. Enhancing thermal conductivity of fluids with nanoparticles: Developments and applications of non-Newtonian flows
3. 2007
4. A review on nanofluids part I: Theoretical and numerical investigations10.1590/s0104-66322008000400001 ↗
5. Stagnation-point flow over a stretching/shrinking sheet in a nanofluid10.1186/1556-276x-6-623 ↗
6. Influence of thermal radiation and Joule heating on MHD flow of a Maxwell fluid in the presence of thermophoresis10.1016/j.ijheatmasstransfer.2010.06.014 ↗
7. Convective transport in nanofluids10.1115/1.2150834 ↗
8. Mixed convective nanofluid flow over a non linearly stretched Riga plate10.1016/j.csite.2020.100828 ↗
9. A Galerkin approach to analyze MHD flow of nanofluid along converging diverging channels10.1007/s00419-020-01861-6 ↗
10. Thermally developed unsteady viscoelastic micropolar nanofluid with modified heat mass fluxes a generalized model10.1016/j.physa.2019.123986 ↗
11. Darcy-Forchheimer relation in Casson type MHD nanofluid flow over non-linear stretching surface10.1016/j.jppr.2020.04.003 ↗
12. A homogeneous-heterogeneous model for mixed convection in gravitydriven film flow of nanofluid10.1016/j.icheatmasstransfer.2018.03.015 ↗
13. MHD slip flow and convective heat transfer due to a moving plate with effects of variable viscosity and thermal conductivity10.1108/mmms-08-2019-0142 ↗
14. Application of TCE-PCM based heat sinks for cooling of electronic components10.1016/j.rser.2015.12.238 ↗
15. Methods of heat transfer intensification in PCM thermal storage systems10.1016/j.rser.2018.04.064 ↗
16. Phase-change-materials (PCM) for automotive applications10.1016/j.applthermaleng.2017.12.097 ↗
17. Opportunities and challenges of PCM to air heat exchangers (PAHXs) for building free cooling applications—A compreshensive review10.1016/j.est.2019.02.011 ↗
18. Potential of macroencapsulated PCM for thermal energy storage in buildings: A critical review10.1016/j.conbuildmat.2019.07.221 ↗
19. Phase-change heat transfer of single/hybrid nanoparticles-enhanced phase change materials over a heated horizontal cylinder confined in a square cavity10.1016/j.apt.2016.10.009 ↗
20. Melting of nanoparticles-enhanced phase change materials in an enclosure: Effect of hybrid nanoparticles10.1016/j.ijmecsci.2017.09.045 ↗
21. Mixed convection boundary layer flow and heat transfer over a vertical plate embedded in a porous medium filled with a suspension of nano-encapsulated phase change materials10.1016/j.molliq.2019.111432 ↗
22. Natural convective flow and heat transfer of nano-encapsulated phase change materials (NEPCMs) in a cavity10.1016/j.ijheatmasstransfer.2019.04.037 ↗
23. Transient mixed convective heat transfer with melting effect from the vertical plate in a liquid saturated porous medium10.1016/j.ijengsci.2006.05.008 ↗
24. Study of heat and fluid flow during melting of PCM inside vertical cylindrical tube10.1016/j.ijthermalsci.2018.09.017 ↗
25. Bio-convection analysis for Sutterby nanofluid over an axially stretched cylinder with melting heat transfer and variable thermal features: A Marangoni and solutal model10.1016/j.aej.2021.03.056 ↗
26. Low-melting-point liquid metal convective heat transfer10.1016/j.applthermaleng.2021.117021 ↗
27. Melting heat transfer in steady laminar flow over a moving surface10.1007/s00231-010-0592-8 ↗
28. Numerical solution of micropolar fluid flow via stretchable surface with chemical reaction and melting heat transfer using Keller-box method10.1016/j.jppr.2020.11.006 ↗
29. A study of entropy generation in fundamental convective heat transfer10.1115/1.3451063 ↗
30. The thermodynamic design of heat and mass transfer processes and devices10.1016/0142-727x(87)90062-2 ↗
31. Computational analysis of heat transfer in mixed convective flow of CNTs with entropy optimization by a curved stretching sheet10.1016/j.icheatmasstransfer.2020.104881 ↗
32. Entropy optimization in passive and active flow of liquid hydrogen based nanoliquid transport by a curved stretching sheet10.1016/j.icheatmasstransfer.2020.104890 ↗
33. Entropy optimized CNTs based Darcy-Forchheimer nanomaterial flow between two stretchable rotating disks10.1016/j.ijhydene.2019.10.053 ↗
34. Irreversibility characterization in nanoliquid flow with velocity slip and dissipation by a stretchable cylinder10.1016/j.aej.2021.01.018 ↗
35. Transpiration and viscous dissipation effects on entropy generation in hybrid nanofluid flow over a nonlinear radially stretching disk10.3390/e20090668 ↗
36. Entropy generation in a dissipative nanofluid flow under the influence of magnetic dissipation and transpiration10.3390/en13205506 ↗
37. Entropy optimized MHD 3D nanomaterial of non-Newtonian fluid: A combined approach to good absorber of solar energy and intensification of heat transport10.1016/j.cmpb.2019.105131 ↗
38. Interfacial layer and shape effects of modified Hamilton’s crosser model in entropy optimized Darcy-Forchheimer flow10.1016/j.aej.2021.02.010 ↗
39. Aspects of entropy generation for the non-similar three-dimensional bio-convection flow of nanofluids10.1063/1.5142877 ↗
40. Influence of NbC particles on microstructure and mechanical properties of AlCoCrFeNi high-entropy alloy coatings prepared by laser cladding10.1016/j.jallcom.2019.02.223 ↗
41. Ru/CeO2 catalyst with optimized CeO2 support morphology and surface facets for propane combustion10.1021/acs.est.9b01929 ↗
42. Predictive model of convective heat transfer coefficient in bone micro-grinding using nanofluid aerosol cooling10.1016/j.icheatmasstransfer.2021.105317 ↗
43. Convective heat transfer coefficient model under nanofluid minimum quantity lubrication coupled with cryogenic air grinding Ti–6Al–4V
44. Surface morphology assessment of CFRP transverse grinding using CNT nanofluid minimum quantity lubrication10.1016/j.jclepro.2020.123328 ↗
45. Series solutions of non-similarity boundary layer flows of nano-fluids over stretching surface10.1007/s11075-014-9934-9 ↗
46. Local non-similarity thermal boundary layer solutions10.1115/1.3449827 ↗
47. Local non-similar solutions for free convective flow with uniform lateral mass flux in a porous medium10.1016/0094-4548(82)90054-6 ↗
48. Local non-similarity solution for MHD mixed convection flow of a nanofluid past a permeable vertical plate in the presence of thermal radiation effects10.4172/2168-9679.1000261 ↗
49. Local non-similarity solutions for mixed convection flow with lateral mass flux over an inclined flat plate embedded in a saturated porous medium10.1016/S1018-3639(18)30630-5 ↗
50. Modeling and non-similar analysis for Darcy-Forchheimer-Brinkman model of Casson fluid in a porous media10.1016/j.icheatmasstransfer.2020.104955 ↗
51. Impact of non-similar modeling on Darcy-Forchheimer-Brinkman model for forced convection of Casson nano-fluid in non-Darcy porous media10.1016/j.icheatmasstransfer.2021.105312 ↗
52. Non-similar mixed convection analysis for magnetic flow of second-grade nanofluid over a vertically stretching sheet10.1088/1572-9494/abe932 ↗
53. Modeling and numerical computation of nonsimilar forced convective flow of viscous material towards an exponential surface10.1142/S0217979221501186 ↗
54. Melting heat transportation in radiative flow of nano-materials with irreversibility analysis10.1016/j.rser.2021.110739 ↗
55. Numerical solution of the boundary layer flow over an exponentially stretching sheet with thermal radiation
56. MHD boundary layer flow and heat transfer over an exponentially stretching sheet embedded in a thermally stratified medium10.1016/j.aej.2013.02.003 ↗