Effect of damping groove on flow dynamics and vibration characteristics of axial piston pump
Source abstract
Abstract
This paper presents pressure, flow and vibration characteristics of an axial piston pump valve plate with damping grooves. For flow ripple and vibration of the pump reduction, an improved compressible fluid model of axial-piston pump with damping groove is developed to analyze flow dynamics and vibration characteristics. A parametric analysis is performed to analyze the effects of damping groove on the discharge pressure and flow ripples of axial piston pump. The sensitivity of discharge pressure and flow ripple are analyzed to different pressure levels, speeds, and damping groove parameters. The results of pressure ripple and vibration characteristics are validated by experimental test. The experimental and simulation results differ by only approximately 0.75 MPa in the pressure ripple amplitude. The results of the vibration acceleration measurements show that the valve plate with damping groove reduces the vibration level by 0.4 mm/s2 at the rated working condition. It is the effective method that the valve plate parameters are improved to reduce vibration characteristics of axial piston pump.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydraulic and Pneumatic Systems · Cavitation Phenomena in Pumps · Mechanical Circulatory Support Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Wenzhou University 1 , Wenzhou 325035, China
The State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University 2 , Hangzhou 310027, China
Ningbo Special Equipment Inspection and Research Institute 3 , Ningbo 315020, China
Funding
Basic scientific research projects foundation of Wen Zhou · Open foundation of the state key laboratory of fluid power and mechatronic systems · National Youth Foundation of China · Natural Science Foundation of Zhejiang Province
References (24)
Show source-provided references
1. Effect analysis of silencing grooves on pressure and vibration characteristics of seawater axial piston pump10.1177/0954406216660334 ↗
2. Reduction of axial piston pump pressure ripple
3. Reduction of axial piston pump pressure ripple
4. Flow ripple of axial piston pump with computational fluid dynamic simulation using compressible hydraulic oil10.3901/cjme.2010.01.045 ↗
5. Optimization of cross angle based on the pumping dynamics model10.1631/jzus.a0900417 ↗
6. Flow ripple reduction of an axial piston pump by a combination of cross-angle and pressure relief grooves: Analysis and optimization10.1007/s12206-016-0515-9 ↗
7. Effects of index angle on flow ripple of a tandem axial piston pump10.1631/jzus.a1400309 ↗
8. The discharge flow ripple of an axial piston swash-plate type hydrostatic pump10.1115/1.482452 ↗
9. Valve-plate design for an axial piston pump at low displacement10.1115/1.1541632 ↗
10. Influence from the cross-angle on piston forces and bending moments in variable hydraulic piston pumps
11. Experimental verification of cross-angle for noise reduction in hydraulic piston pumps10.1243/09596518jsce208 ↗
12. Flow pulsation reduction for variable displacement motors using cross-angle
13. The secondary source method for the measurement of pump pressure ripple characteristics part 1. Description of method
14. The secondary source method for the measurement of pump pressure ripple characteristics part 2. Experimental results
15. Analysis of the flow dynamics characteristics of an axial piston pump based on the computational fluid dynamics method
16. A complete analysis of axial piston pump leakage and output flow ripples10.1016/j.apm.2011.09.016 ↗
17. Development of an asymmetric axial piston pump for displacement-controlled system10.1177/0954406213508385 ↗
18. Development of a dual-acting axial piston pump for displacement-controlled system10.1177/0954405413506196 ↗
19. Introducing pre-pressurization/depressurization grooves to diminish flow fluctuations of a rotary energy recovery device: Numerical simulation and validating experiment
20. Noise reduction in axial piston machines based on multi-parameter optimization
21. A multi-parameter multi-objective approach to reduce pump noise generation10.1080/14399776.2011.10781018 ↗
22. Flow ripple analysis and structural parametric design of a piston pump10.1007/s12206-017-0823-8 ↗
23. 1988
24. Flow ripple of axial piston pump with computational fluid dynamic simulation using compressible hydraulic oil10.3901/cjme.2010.01.045 ↗