Numerical analysis of a flat plate collector using different types of parallel tube geometry

To obtain improved thermal performance of flat plate solar collectors, the effect of square and rectangular riser tubes of a flat plate collector (FPC) were numerically investigated and compared with circular riser tube FPC in the present study. For this purpose, a three-dimensional numerical model for FPC collectors has been developed and simulated in CFD software ANSYS FLUENT. Transient thermal performance analysis is carried out to find out the optimum geometrical configuration of the FPC riser tube. The numerical results indicated that using the square-shaped riser tube in FPC improves the collector’s useful heat exchange rate as well as thermal efficiency as compared to the use of circular and rectangular riser tubes. There is a maximum 8.1% higher heat exchange rate of the collector with a square riser tube than a circular riser tube under the same operating conditions. The average efficiency of the collector with the circular tube is 65.95%, whereas the square tube has the highest efficiency of 70.44%. However, the pressure drops through the square and rectangular riser geometry are higher than the circular tube. By making a balance between enhanced heat exchange rate and increased pressure drop, the performance evaluation criterion was evaluated and the square-shaped riser tube having the highest value of 2.65 is better than the other configurations. The results clearly indicate that the collector’s performance is notably influenced by the shape of the riser tube, with a square shape yielding superior performance.