Planar metalenses in the mid-infrared
Source abstract
Abstract
Traditional spherical lenses are bulky and often the limiting factor for the miniaturization of modern smart devices. Metalenses can break the limitations of traditional spherical lenses, allowing for the development of ultra-thin planar lenses. Here, we experimentally demonstrated metalenses in the mid-infrared spectral range by patterning a germanium wafer using standard nanofabrication processes. Three 6 mm × 6 mm planar lenses operating at 3μm, 5μm and 8μm were fabricated and characterized. The results show that the focusing efficiency of the metalenses reaches 80% and the numerical aperture is as high as ∼ 0.8, close to the designed theoretical value. The metalenses are also used to image a lighter fire with a quality comparable to traditional spherical lenses.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metamaterials and Metasurfaces Applications · Optical Coatings and Gratings · Advanced Antenna and Metasurface Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of Michigan – Shanghai Jiao Tong University Joint Institute, Shanghai Jiao Tong University , Shanghai 200240, China
Funding
National Natural Science Foundation of China
References (25)
Show source-provided references
1. Concentrated solar energy applications using Fresnel lenses: A review10.1016/j.rser.2011.03.031 ↗
2. Metalenses at visible wavelengths: Past, present, perspectives10.1002/lpor.201600295 ↗
3. Development, recent trends & future prospects of electronics
4. Miniaturized imaging systems10.1016/s0167-9317(03)00102-3 ↗
5. Plasmonics: Merging photonics and electronics at nanoscale dimensions10.1126/science.1114849 ↗
6. Fan-out wafer-level packaging for 3D IC heterogeneous integration
7. Metalenses at visible wavelengths: Diffraction-limited focusing and subwavelength resolution imaging10.1126/science.aaf6644 ↗
8. Ultra-thin, planar, babinet-inverted plasmonic metalenses10.1038/lsa.2013.28 ↗
9. Metasurface device with helicity-dependent functionality10.1002/adom.201500498 ↗
10. A broadband achromatic metalens for focusing and imaging in the visible10.1038/s41565-017-0034-6 ↗
11. Polarization-independent metalens constructed of antennas without rotational invariance10.1364/ol.42.003996 ↗
12. Reflective metalens with sub-diffraction-limited and multifunctional focusing10.1038/s41598-017-13004-z ↗
13. High-efficiency all-dielectric metalenses for mid-infrared imaging10.1002/adom.201700585 ↗
14. Efficient dielectric metasurface collimating lenses for mid-infrared quantum cascade lasers10.1364/oe.23.033310 ↗
15. A high numerical aperture, polarization-insensitive metalens for long-wavelength infrared imaging10.1063/1.5050562 ↗
16. Fundamentals and applications of metasurfaces10.1002/smtd.201600064 ↗
17. Broadband polarization resolving based on dielectric metalenses in the near-infrared10.1364/oe.26.005632 ↗
18. Aberration-free ultrathin flat lenses and axicons at telecom wavelengths based on plasmonic metasurfaces10.1021/nl302516v ↗
19. Dual-polarity plasmonic metalens for visible light10.1038/ncomms2207 ↗
20. Reconfigurable imaging systems using elliptical nanowires10.1021/nl202324s ↗
21. Silicon nanofin grating as a miniature chirality-distinguishing beam-splitter10.1038/ncomms6386 ↗
22. Effect of multiple reflections in retardation plates with elliptical birefringence10.1364/josaa.12.000420 ↗
23. Effect of elliptical birefringence on the measurement of the phase retardation of a quartz wave plate by an optical heterodyne polarimeter10.1364/josaa.14.001367 ↗
24. Broadband high-efficiency dielectric metasurfaces for the visible spectrum10.1073/pnas.1611740113 ↗
25. Mid-infrared plasmonic multispectral filters10.1038/s41598-018-29177-0 ↗