journal article·2025-05-20Open access

Study of MASnI3 perovskite photodetectors prepared by the inverse temperature crystallization method in ambient atmosphere and the spin coating method in a glovebox

Wei-Sung Weng, Yu-Ching Chien, Tsung-Yen Lee, Lung-Chien Chen

Abstract

In this study, we prepared MASnI3 lead (Pb)-free halide perovskite metal-semiconductor-metal-type photodetectors through the inversion crystallization method under an atmospheric environment and the spin-coating method in a glove box, respectively. The scanning electron microscopy (SEM) images revealed the different surface morphology. They show two types of growth models: the inverse temperature crystallization (ITC) method uses solvent volatilization, and the spin-coating method is a reaction between precursors. For the MASnI3 perovskite film obtained through the inversion crystallization method, a broad band of photoluminescence (PL) spectrum at approximately 470 nm, corresponding to the level transition of 2.638 eV, was observed. On the other hand, for the MASnI3 perovskite film obtained through the spin-coating method, a narrow band of the photoluminescence spectrum at approximately 773 nm, corresponding to the level transition of 1.604 eV, was observed. This is the Burstein–Moss shift environment due to the introduction of oxygen. In addition, the photocurrent of a device prepared in a glove box is two orders of magnitude higher than that of the device prepared by the ITC method.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Challenges in tin perovskite solar cells10.1039/d1cp02596a ↗
2. Manufacture of high-Efficiency and stable lead-free solar cells through Antisolvent Quenching Engineering10.3390/nano12172901 ↗
3. Optical properties of In2O3 oxidized from InN deposited by reactive magnetron sputtering10.1016/j.apsusc.2005.11.051 ↗
4. A study of inverted-type perovskite solar cells with various composition ratios of (FAPbI3)1−x(MAPbBr3)x10.3390/nano6100183 ↗
5. Lead-free solid-state organic–inorganic halide perovskite solar cells10.1038/nphoton.2014.82 ↗
6. Solvent-mediated crystallization of CH3NH3SnI3 films for Heterojunction Depleted perovskite solar cells10.1021/jacs.5b06658 ↗
7. Achieving high response of perovskite-based (MAPbI3) NH3 gas sensors using binary mixed solvent approaches10.1016/j.sna.2024.116116 ↗
8. Large-scale synthesis of freestanding layer-structured PbI2 and MAPbI3 nanosheets for high-performance photodetection10.1002/adma.201702759 ↗
9. Achieving high response of perovskite-based (MAPbI3) ammonia gas sensors at room temperature via light enhancement10.1039/d4tc04522j ↗
10. MAPbI3 photodetectors with 4.7 MHz bandwidth and their application in organic optocouplers10.1021/acs.jpclett.1c04137 ↗
11. Synthesis, resistivity, and thermal properties of the cubic perovskite NH2CH=NH2SnI3 and related systems10.1006/jssc.1997.7593 ↗
12. Electronic structure and thermal conductance of the MASnI3/Bi2Te3 interface: a first-principles study10.1038/s41598-021-04234-3 ↗
13. Lead-free organic–inorganic tin halide perovskites for photovoltaic applications10.1039/c4ee01076k ↗
14. Theoretical and experimental investigations on the bulk photovoltaic effect in lead-free perovskites MASnI3 and FASnI310.1039/d0ra02584d ↗
15. Impact of anionic Br– substitution on open circuit voltage in lead free perovskite (CsSnI3-xBrx) solar cells10.1021/jp5126624 ↗
16. Performance optimization of MASnI3 perovskite solar cells: insights into device architecture10.1016/j.micrna.2024.207827 ↗
17. Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties10.1021/ic401215x ↗
18. Optical properties and electronic structure of InN and In-rich group III-nitride alloys10.1016/j.jcrysgro.2004.05.041 ↗
19. Lead contamination analysis of perovskite modules under simulated working conditions10.1016/j.solener.2021.08.031 ↗
20. Structures, phase transitions and tricritical behavior of the hybrid perovskite methyl ammonium lead iodide10.1038/srep35685 ↗
21. Tunable periodic nanopillar array for MAPbI3 perovskite photodetectors with improved light absorption10.1021/acsomega.3c07390 ↗
22. Local temperature reduction induced crystallization of MASnI3 and achieving a direct wafer production10.1039/c7ra07101a ↗
23. Growing MASnI3 perovskite single-crystal films by inverse temperature crystallization10.1088/1361-648x/ac4c64 ↗
24. Device-level in-sensor olfactory perception system based on array of PCBM-MAPbI3 heterostructure transistors10.1002/adfm.202406239 ↗
25. High-quality perovskite MAPbI3 single crystals for broad-spectrum and rapid response integrate photodetector10.1016/j.jechem.2017.11.002 ↗