Spectrally Stable Pure Red CsPbI₃ Quantum Dots Light‐Emitting Diodes via Effective Low Temperature Gradient Centrifugation Separation and Surface Modification

Abstract Development of high‐performance and stable pure red perovskite light‐emitting devices (LEDs) promotes commercialization of perovskite. Benefiting from the quantum confinement effect, pure red CsPbI₃ quantum dots (QDs) can avoid the color drift issue for mixed halide systems. Herein, a facile temperature‐dependent hot‐injection method combined with low temperature gradient centrifugation is employed to prepare 5.60 ± 0.05 nm pure red QDs. The QDs exhibit 642 nm photoluminescence (PL) with 37 nm full width at half maximum, and their Commission Internationale de l'Eclairage (CIE) coordinates located at (0.708, 0.292) match well with standard pure red for Rec. 2020. The PL half‐lifetime for pure red QDs solution is 210 days under ambient conditions, and both the X and Y coordinates of CIE only fluctuate within (0.002, 0.002). Finally, a simple NH₄I post‐treatment to decrease ligand length further boosts the QDs conductivity, and the pure red LED exhibits 9.4% maximum external quantum efficiency. The electroluminescence spectra exhibits a sharp peak at 645 nm, and their CIE coordinates are located at (0.707, 0.290). Furthermore, the pure red LED exhibits both good working and color stability. Its half‐lifetime is 25.1 min and color drifts are only (0.002, 0.002) after 30.0 min of continuous working at 60 cd m⁻² with a constant current density of 3.5 mA cm⁻².