Design of Wireless Multiple Gases Complementary Architecture Sensors Based on SnSe₂ and PtSe₂ Layered Films and Oscillating Circuits

Abstract Owing to the increasing demand for monitoring harmful toxic gases using small‐sized low‐power‐consumption gas sensors, a room‐temperature wireless complimentary gas sensor incorporating layered materials is proposed and demonstrated. The compact design allows the sensing module to be installed under all conditions and facilitates multiple detections of toxic gas. Highly chemical‐resistance‐sensitive materials based on n‐type SnSe₂ and p‐type PtSe₂ layered materials prepared by the plasma‐assisted chemical vapor reaction (PACVR) method at low temperatures are integrated with an oscillation circuit and antenna fabricated by a 28‐nm CMOS high‐k metal gate logic process to achieve dense, low‐powered, and wireless characteristics. By pairing n‐ and p‐type layered semiconductors, the gas sensors feature less influence from the surroundings, such as temperature and humidity, and enhance sensitivity to the target gas simultaneously. The wireless sensing detection method enables a sensor to make signal reception more convenient. Furthermore, a wireless gas sensor with self‐converging calibration using the advantage of a floating‐gate (FG) transistor to control the charge quantity by shifting the threshold voltage (V_th) of each transistor via the channel hot electron injection effect, which helps to reduce the impact of process variations, minimizing readout errors, is proposed.