Composition‐Dependent Passivation Efficiency at the CdS/CuIn_1-xGa_xSe₂ Interface

Abstract The bandgap of CuIn_1-xGa_xSe₂ (CIGS) chalcopyrite semiconductors can be tuned between ≈1.0 and ≈1.7 eV for Ga contents ranging between x = 0 and x = 1. While an optimum bandgap of 1.34 eV is desirable for achieving maximum solar energy conversion in solar cells, state‐of‐the‐art CIGS‐based devices experience a drop in efficiency for Ga contents x > 0.3 (i.e., for bandgaps >1.2 eV), an aspect that is limiting the full potential of these devices. The mechanism underlying the limited performance as a function of CIGS composition has remained elusive: both surface and bulk recombination effects are proposed. Here, the disentanglement between surface and bulk effects in CIGS absorbers as a function of Ga content is achieved by comparing photogenerated charge carrier dynamics in air/CIGS and surface‐passivated ZnO/CdS/CIGS samples. While surface passivation prevents surface recombination of charge carriers for low Ga content (x < 0.3; up to 1.2 eV bandgap), surface recombination dominates for higher‐bandgap materials. The results thus demonstrate that surface, rather than bulk effects, is responsible for the drop in efficiency for Ga contents larger than x ≈ 0.3.