Drying of green veneer hollow tubes monitored using stereo digital images correlation
Source abstract
Abstract
The present study is based on the patent FR3052379A1, which consists of rolling and gluing green veneers to form structuralsize hollow tubes. The objective was to study the drying behavior of circular hollow tubes and investigate the method of crack detection using image correlation from green conditions to equilibrium moisture content. The manufactured tubes are composed of six plies. Three different configurations of global grain angle orientations with respect to the tube longitudinal axis are used: {0, 0, 0}°, {10, 0, 10}°, and {− 10, 0, 10}°. Each grain angle was made up of two plies. The tubes deformation and crack formation due to drying shrinkage were measured using a stereo digital image correlation system. The stereo correlation is suitable for measuring tangential shrinkage and studying the opening and/or closing of cracks on the surface of the tubes subjected to internal moisture variations and blocked deformations. The influence of grain angle was discussedin this paper; however, due to the very few numbers of samples, no conclusive findings can be made.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Optical measurement and interference techniques · Structural Health Monitoring Techniques · Textile materials and evaluations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Bader M, Nemeth R (2019) Moisture-dependent mechanical properties of longitudinally compressed wood. Eur J Wood Prod 77:1009–1019. https://doi.org/10.1007/s00107-019-01448-110.1007/s00107-019-01448-1 ↗
2. Barnes D (2002) A model of the effect of strand angle and grain angle on the strength properties of oriented veneer and strand wood composites. For Prod J 52:39
3. Bekele T (1994) Kiln drying of sawn boards of young Eucalyptus globulus Labill. And Eucalyptus camaldulensis Dehnh. grown on the Ethiopian Highlands. Holz Roh Werkst 52:377–38210.1007/BF02615388 ↗
4. Blomqvist L, Johansson J, Sandberg D (2013) Shape stability of laminated veneer products–An experimental study of the influence on distortion of some material and process parameters. Wood Mat Sci Eng 8:198–21110.1080/17480272.2013.803501 ↗
5. Burnard MD, Muszyński L, Leavengood S, Ganio L (2018) An optical method for rapid examination of check development in decorative plywood panels. Eur J Wood Prod 76:1367–1377. https://doi.org/10.1007/s00107-018-1327-710.1007/s00107-018-1327-7 ↗
6. Eckelman CA (2004) Exploratory study of high-strength, low-cost through-bolt with cross-pipe and nut connections for square and roundwood timber frame construction. For Prod J Index 54:29–37
7. Farley GL, Jones RM (1992) Crushing characteristics of continuous fiber-reinforced composite tubes. J Compos Mater 26:37–5010.1177/002199839202600103 ↗
8. Garcia RA, Rosero-Alvarado J, Hernández RE (2020) Full-field moisture-induced strains of the different tissues of tamarack and red oak woods assessed by 3D digital image correlation. Wood Sci Technol 54:139–159. https://doi.org/10.1007/s00226-019-01145-510.1007/s00226-019-01145-5 ↗
9. Gérard J, Guibal D, Paradis S et al (2011) Tropix 7. CIRAD. https://doi.org/10.18167/74726f70697810.18167/74726f706978 ↗
10. Gilbert BP, Dias-da-Costa D, Lebée A, Foret G (2020) Veneer-based timber circular hollow section beams: behaviour, modelling and design. Constr Build Mater 258:120380. https://doi.org/10.1016/j.conbuildmat.2020.12038010.1016/j.conbuildmat.2020.120380 ↗
11. Guélou R, Eyma F, Cantarel A, et al (2021) Crashworthiness of poplar wood veneer tubes. International Journal of Impact Engineering 147:10373810.1016/j.ijimpeng.2020.103738 ↗
12. Hamada H, Ramakrishna S, Sato H (1996) Effect of fiber orientation on the energy absorption capability of carbon fiber/PEEK composite tubes. J Compos Mater. https://doi.org/10.1177/00219983960300080610.1177/002199839603000806 ↗
13. Han Y, Park Y, Park J-H et al (2016) The shrinkage properties of red pine wood assessed by image analysis and near-infrared spectroscopy. Drying Technol 34:1613–162010.1080/07373937.2016.1138964 ↗
14. Hartig JU, Facchini S, Haller P (2018) Investigations on lateral vehicle impact on moulded wooden tubes made of beech (Fagus sylvatica L.). Constr Build Mater 174:547–558. https://doi.org/10.1016/j.conbuildmat.2018.04.13210.1016/j.conbuildmat.2018.04.132 ↗
15. Hirschmüller S, Pravida J, Marte R, Flach M (2019) Long-term material properties of circular hollow laminated veneer lumber sections under water saturation and cement alkaline attack. Wood Mater Sci Eng 14:142–156. https://doi.org/10.1080/17480272.2018.143483010.1080/17480272.2018.1434830 ↗
16. Huybers P (1987) Timber pole space frames. Int J Space Struct 2:77–8610.1177/026635118700200202 ↗
17. Kang H-Y, Milota M, Kang C, Matsumura J (2011) Preliminary tests for optically measuring drying strains and check formation in wood. J Fac Agric Kyushu Univ 56:313–31610.5109/20326 ↗
18. Kollmann F (1955) Technologie des Holzes und der Holzwerkstoffe (Technology of wood and wood-based materials). Springer, Berlin10.1007/978-3-642-52947-4 ↗
19. Langrish TAG, Bohm N (1997) An experimental assessment of driving forces for drying in hardwoods. Wood Sci Technol 31:415–42210.1007/BF00702563 ↗
20. Lanvermann C, Sanabria SJ, Mannes D, Niemz P (2014) Combination of neutron imaging (NI) and digital image correlation (DIC) to determine intra-ring moisture variation in Norway spruce. Holzforschung 68:113–12210.1515/hf-2012-0171 ↗
21. Lavalette A, Cointe A, Pommier R et al (2016) Experimental design to determine the manufacturing parameters of a green-glued plywood panel. Eur J Wood Prod 74:543–55110.1007/s00107-016-1015-4 ↗
22. Lee SS, Jeong GY (2018) Effects of sample size on swelling and shrinkage of Larix kaempferi and Cryptomeria japonica as determined by digital caliper, image analysis, and digital image correlation (DIC). Holzforschung 72:477–48810.1515/hf-2017-0120 ↗
23. Lee SS, Pang SJ, Jeong GY (2019) Effects of size, species, and adjacent lamina on moisture-related strain in glulam. Wood Fiber Sci 51:101–11810.22382/wfs-2019-013 ↗
24. Makomra V, Oum Lissouck R, Pommier R et al (2020) Analysis of drying stresses in green-glued plywood of Bete (Mansonia altissima) specie. J Wood Sci 66:70. https://doi.org/10.1186/s10086-020-01911-110.1186/s10086-020-01911-1 ↗
25. Nopens M, Riegler M, Hansmann C, Krause A (2019) Simultaneous change of wood mass and dimension caused by moisture dynamics. Sci Rep 9:10309. https://doi.org/10.1038/s41598-019-46381-810.1038/s41598-019-46381-8 ↗
26. Pang S (2000) Modelling of stress development during drying and relief during steaming in Pinus radiata lumber. Drying Technol 18:1677–169610.1080/07373930008917806 ↗
27. Pang S-J, Jeong GY (2020) Swelling and shrinkage behaviors of cross-laminated timber made of different species with various lamina thickness and combinations. Constr Build Mater 240:117924. https://doi.org/10.1016/j.conbuildmat.2019.11792410.1016/j.conbuildmat.2019.117924 ↗
28. Park JH, Park Y, Han Y et al (2014) Effect of outer surface sealing treatment on the reduction of surface check occurrence during the drying of center-bored round timber. Drying Technol 32:236–24310.1080/07373937.2013.821995 ↗
29. Peng M, Ho Y-C, Wang W-C et al (2012) Measurement of wood shrinkage in jack pine using three dimensional digital image correlation (DIC). Holzforschung 66:639–64310.1515/hf-2011-0124 ↗
30. Pommier R, Guillaume G, Matthieu P, Nordine L (2017) Assembly process for peeled wood in the form of a tube and products issued from this process. French Patent Application Number: FR3052379A1
31. Pröller M (2016) An investigation into the edge gluing of green Eucalyptus grandis lumber using a one-component polyurethane adhesive. MSc. For (Wood Products Science) thesis. Department of Forest and Wood Science, Stellenbosch University
32. Properzi M, Pizzi A, Uzielli L (2003) Comparative wet wood gluing performance of different types of Glulam wood adhesives. Eur J Wood Prod 61(1):77–7810.1007/s00107-002-0347-4 ↗
33. Purba CYC, Pot G, Viguier J et al (2019) The influence of veneer thickness and knot proportion on the mechanical properties of laminated veneer lumber (LVL) made from secondary quality hardwood. Eur J Wood Prod 77:393–40410.1007/s00107-019-01400-3 ↗
34. Ranta-Maunus A (1999) Round small-diameter timber for construction. Final report of project FAIR CT 95-0091
35. Rohumaa A, Viguier J, Girardon S et al (2018) Lathe check development and properties: effect of log soaking temperature, compression rate, cutting radius and cutting speed during peeling process of European beech (Fagus sylvatica L.) veneer. Eur J Wood Prod 76:1653–166110.1007/s00107-018-1341-9 ↗
36. Rosero-Alvarado J, Hernández RE, Riedl B (2018) Surface deformation of walnut burl veneer on aircraft sandwich panels assessed by three-dimensional digital image correlation. Wood Sci Technol 52:1511–1525. https://doi.org/10.1007/s00226-018-1040-z10.1007/s00226-018-1040-z ↗
37. Ross RJ (2010) Wood handbook: wood as an engineering material. USDA Forest Service, Forest Products Laboratory, General Technical Report FPL-GTR-190, vol 509, pp 1–19010.2737/FPL-GTR-190 ↗
38. Sepulveda-Villarroel V, Perez-Peña N, Salinas-Lira C et al (2016) The development of moisture and strain profiles during predrying of Eucalyptus nitens. Drying Technol 34:428–43610.1080/07373937.2015.1060490 ↗
39. Shao X, Dai X, Chen Z et al (2016) Calibration of stereo-digital image correlation for deformation measurement of large engineering components. Meas Sci Technol 27:125010. https://doi.org/10.1088/0957-0233/27/12/12501010.1088/0957-0233/27/12/125010 ↗
40. Stöhr HP (1988) Shrinkage differential as a measure for drying stress determination. Wood Sci Technol 22:121–12810.1007/BF00355848 ↗
41. Sutton MA, Orteu JJ, Schreier H (2009) Image correlation for shape, motion and deformation measurements: basic concepts, theory and applications. Springer Science & Business Media
42. Valla A, Konnerth J, Keunecke D et al (2011) Comparison of two optical methods for contactless, full field and highly sensitive in-plane deformation measurements using the example of plywood. Wood Sci Technol 45:755–76510.1007/s00226-010-0394-7 ↗
43. Viguier J, Marcon B, Butaud JC et al (2021) Panel shear of plywood in structural sizes—assessment improvement using digital image correlation. Exp Tech 45:195–20610.1007/s40799-020-00430-4 ↗