Synergistic Surface Modification of Tin–Lead Perovskite Solar Cells

Abstract Interfaces in thin‐film photovoltaics play a pivotal role in determining device efficiency and longevity. In this work, the top surface treatment of mixed tin–lead (≈1.26 eV) halide perovskite films for p–i–n solar cells is studied. Charge extraction is promoted by treating the perovskite surface with piperazine. This compound reacts with the organic cations at the perovskite surface, modifying the surface structure and tuning the interfacial energy level alignment. In addition, the combined treatment with C₆₀ pyrrolidine tris‐acid (CPTA) reduces hysteresis and leads to efficiencies up to 22.7%, with open‐circuit voltage values reaching 0.90 V, ≈92% of the radiative limit for the bandgap of this material. The modified cells also show superior stability, with unencapsulated cells retaining 96% of their initial efficiency after >2000 h of storage in N₂ and encapsulated cells retaining 90% efficiency after >450 h of storage in air. Intriguingly, CPTA preferentially binds to Sn²⁺ sites at film surface over Pb²⁺ due to the energetically favored exposure of the former, according to first‐principles calculations. This work provides new insights into the surface chemistry of perovskite films in terms of their structural, electronic, and defect characteristics and this knowledge is used to fabricate state‐of‐the‐art solar cells.