Tailoring C₆₀ for Efficient Inorganic CsPbI₂Br Perovskite Solar Cells and Modules

Abstract Although inorganic perovskite solar cells (PSCs) are promising in thermal stability, their large open‐circuit voltage (V_OC) deficit and difficulty in large‐area preparation still limit their development toward commercialization. The present work tailors C₆₀ via a codoping strategy to construct an efficient electron‐transporting layer (ETL), leading to a significant improvement in V_OC of the inverted inorganic CsPbI₂Br PSC. Specifically, tris(pentafluorophenyl)borane (TPFPB) is introduced as a dopant to lower the lowest unoccupied molecular orbital (LUMO) level of the C₆₀ layer by forming a Lewis acidic adduct. The enlarged free energy difference provides a favorable enhancement in electron injection and thereby reduces charge recombination. Subsequently, a nonhygroscopic lithium salt (LiClO₄) is added to increase electron mobility and conductivity of the film, leading to a reduction in the device hysteresis and facilitating the fabrication of a large‐area device. Finally, the as‐optimized inorganic CsPbI₂Br PSCs gain a champion power conversion efficiency (PCE) of 15.19%, with a stabilized power output (SPO) of 14.21% (0.09 cm²). More importantly, this work also demonstrates a record PCE of 14.44% for large‐area inorganic CsPbI₂Br PSCs (1.0 cm²) and reports the first inorganic perovskite solar module with the excellent efficiency exceeding 12% (10.92 cm²) by a self‐developed quasi‐curved heating method.