From ilmenite to TiO2 nanostructures: integrated processing routes, phase control, and photocatalytic applications
Source abstract
Abstract
Abstract In recent years, processing naturally occurring materials, such as ilmenite, to develop titanium dioxide nanostructures has emerged as an economic, renewable, and eco-friendly approach. This review article focuses on various processing routes of ilmenite, namely, pre-treatment, extractive processing (sulfate and chloride methods), and the synthesis of the resulting titanium dioxide nanostructures. The resulting architectures, including nanofibers, nanotubes, nanowires, and nanoparticles, demonstrate significant potential in photocatalytic applications, particularly under visible light irradiation. While there have been encouraging outcomes at laboratory scales, significant challenges remain, such as the diversity in chemical compositions of ilmenite deposits and the comparatively high energy consumption associated with conventional processing routes. Addressing these challenges requires the development of energy-efficient processing routes (100–120 °C) as an integral component of industrial scalability. Overall, utilizing ilmenite as a precursor for nanostructure synthesis holds immense potential for promoting green technologies in environmental, energy, and healthcare sectors.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Iron and Steelmaking Processes · TiO2 Photocatalysis and Solar Cells · Pigment Synthesis and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Sood S, Umar A, Mehta SK, Kansal SK. Highly effective Fe-doped TiO2 nanoparticles photocatalysts for visible-light driven photocatalytic degradation of toxic organic compounds. J Colloid Interface Sci. 2015;450:213–23.10.1016/j.jcis.2015.03.018 ↗
2. Kim MG, Kang JM, Lee JE, Kim KS, Kim KH, Cho M, et al. Effects of calcination temperature on the phase composition, photocatalytic degradation, and virucidal activities of TiO2 nanoparticles. ACS Omega. 2021;6:10668–78.10.1021/acsomega.1c00043 ↗
3. Canchanya-Huaman Y, Mayta-Armas AF, Pomalaya-Velasco J, Bendezú-Roca Y, Guerra JA, Ramos-Guivar JA. Strain and grain size determination of CeO2 and TiO2 nanoparticles: comparing integral breadth methods versus Rietveld, μ-Raman, and TEM. Nanomaterials. 2021;11:2311.10.3390/nano11092311 ↗
4. Miyoshi A, Nishioka S, Maeda K. Water splitting on rutile TiO2-based photocatalysts. Chem Eur J. 2018;24:18204–19.10.1002/chem.201800799 ↗
5. Cowan AJ, Tang J, Leng W, Durrant JR, Klug DR. Water splitting by nanocrystalline TiO2 in a complete photoelectrochemical cell exhibits efficiencies limited by charge recombination. J Phys Chem C. 2010;114:4208–14.10.1021/jp909993w ↗
6. Poulios I, Aetopoulou I. Photocatalytic degradation of the textile dye reactive orange 16 in the presence of TiO2 suspensions. Environ Technol. 1999;20:479–87.10.1080/09593332008616843 ↗
7. Sarkar S, Chakraborty S, Bhattacharjee C. Photocatalytic degradation of pharmaceutical wastes by alginate supported TiO2 nanoparticles in packed bed photo reactor (PBPR). Ecotoxicol Environ Saf. 2015;121:263–70.10.1016/j.ecoenv.2015.02.035 ↗
8. Verma N, Chundawat TS, Chandra H, Verma M, Kim H, Vaya D. Study of photocatalytic and antimicrobial activities of TiO2/ZnO/graphene oxide nanocomposites. J Water Process Eng. 2025;72:107647.10.1016/j.jwpe.2025.107647 ↗
9. Chen D, Cheng Y, Zhou N, Chen P, Wang Y, Li K, et al. Photocatalytic degradation of organic pollutants using TiO2-based photocatalysts: a review. J Clean Prod. 2020;268:121725.10.1016/j.jclepro.2020.121725 ↗
10. Ajmal A, Majeed I, Malik RN, Idriss H, Nadeem MA. Principles and mechanisms of photocatalytic dye degradation on TiO2 based photocatalysts: a comparative overview. RSC Adv. 2014;4:37003–26.10.1039/C4RA06658H ↗
11. Xiang C, Li M, Zhi M, Manivannan A, Wu N. Reduced graphene oxide/titanium dioxide composites for supercapacitor electrodes: shape and coupling effects. J Mater Chem. 2012;22:19161–7.10.1039/c2jm33177b ↗
12. Dundar I, Krichevskaya M, Katerski A, Acik IO. TiO2 thin films by ultrasonic spray pyrolysis as photocatalytic material for air purification. R Soc Open Sci. 2019;6:181578.10.1098/rsos.181578 ↗
13. Nkele AC, Chime UK, Asogwa L, Nwanya AC, Nwankwo U, Ukoba K, et al. A study on titanium dioxide nanoparticles synthesized from titanium isopropoxide under SILAR-induced gel method: transition from anatase to rutile structure. Inorg Chem Commun. 2020;112:107705.10.1016/j.inoche.2019.107705 ↗
14. H.R. Henson, Opportunities and Challenges for the Industrial Titanium Market, in: MATEC Web of Conferences, EDP Sciences, 2020, pp. 02007.10.1051/matecconf/202032102007 ↗
15. Nazir G, Liu H, Rehman A, Hussain S, Vikraman D, Aftab S, et al. Cellulose acetate-derived ternary-doped hierarchically porous carbons blended perovskite active layers for solar cells and X-ray detectors. Surf Interfaces. 2023;39:102945.10.1016/j.surfin.2023.102945 ↗
16. Ali I, Suhail M, Alothman ZA, Alwarthan A. Recent advances in syntheses, properties and applications of TiO2 nanostructures. RSC Adv. 2018;8:30125–47.10.1039/C8RA06517A ↗
17. Song T, Paik U. TiO2 as an active or supplemental material for lithium batteries. J Mater Chem A. 2016;4:14–31.10.1039/C5TA06888F ↗
18. El-Deen S, Hashem A, Abdel Ghany A, Indris S, Ehrenberg H, Mauger A, et al. Anatase TiO2 nanoparticles for lithium-ion batteries. Ionics. 2018;24:2925–34.10.1007/s11581-017-2425-y ↗
19. Braun JH, Baidins A, Marganski RE. TiO2 pigment technology: a review. Prog Org Coat. 1992;20:105–38.10.1016/0033-0655(92)80001-D ↗
20. He G, Zhang J, Hu Y, Bai Z, Wei C. Dual-template synthesis of mesoporous TiO2 nanotubes with structure-enhanced functional photocatalytic performance. Appl Catal B Environ. 2019;250:301–12.10.1016/j.apcatb.2019.03.027 ↗
21. Janssen A, Putnis A. Processes of oxidation and HCl-leaching of Tellnes ilmenite. Hydrometallurgy. 2011;109:194–201.10.1016/j.hydromet.2011.07.004 ↗
22. Nguyen TH, Lee MS. A review on the recovery of titanium dioxide from ilmenite ores by direct leaching technologies. Miner Process Extr Metall Rev. 2019;40:231–47.10.1080/08827508.2018.1502668 ↗
23. Zhang W, Zhu Z, Cheng CY. A literature review of titanium metallurgical processes. Hydrometallurgy. 2011;108:177–88.10.1016/j.hydromet.2011.04.005 ↗
24. Zhai J, Chen P, Sun W, Chen W, Wan S. A review of mineral processing of ilmenite by flotation. Miner Eng. 2020;157:106558.10.1016/j.mineng.2020.106558 ↗
25. J.W. Anthony, R.A. Bideaux, K.W. Bladh, M.C. Nichols, Handbook of mineralogy, Mineral Data Publ., 2001.
26. Supriyatna YI, Astuti W, Sumardi S, Prasetya A, Ginting LIB, Irmawati Y, et al. Correlation of nano titanium dioxide synthesis and the mineralogical characterization of ilmenite ore as raw material. Int J Technol. 2021. https://doi.org/10.14716/ijtech.v12i4.4270.10.14716/ijtech.v12i4.4270 ↗
27. Pownceby M, Bourne P. Detrital chrome-spinel grains in heavy-mineral sand deposits from Southeast Africa. Mineral Mag. 2006;70:51–64.10.1180/0026461067010312 ↗
28. Yustanti E, Rosani A, Lalasari LH. The leaching of South Kalimantan ilmenite decomposed by NaOH using hydrochloric acid solution. Teknika Jurnal Sains dan Teknologi. 2021;17:21–5.10.36055/tjst.v17i1.10789 ↗
29. Maulana FA, Yuwono AH, Sofyan N, Dhaneswara D, Septiningrum F, Nurhidayah E, et al. A review on novel routes of synthesizing titanium dioxide-based nanostructure derived from ilmenite mineral. Chem Eng J Adv. 2024;20:100640.10.1016/j.ceja.2024.100640 ↗
30. Oladipupo P, Raman A, Pekny JF. Minimum production scale for economic feasibility of a titanium dioxide plant. J Adv Manuf Process. 2023;5:e10167.10.1002/amp2.10167 ↗
31. Wang X, Li C, Yue H, Yuan S, Liu C, Tang S, et al. Effects of mechanical activation on the digestion of ilmenite in dilute H2SO4. Chin J Chem Eng. 2019;27:575–86.10.1016/j.cjche.2018.06.020 ↗
32. Ebadi H, Pourghahramani P, Nemati Akhgar B. Characterization of microstructural changes of mechanically activated ilmenite. J Min Environ. 2021;12:515–28.
33. Fu X, Wang Y, Wei F. Phase transitions and reaction mechanism of ilmenite oxidation. Metall Mater Trans A. 2010;41:1338–48.10.1007/s11661-010-0173-y ↗
34. Baláž P. Mechanical activation in hydrometallurgy. Int J Miner Process. 2003;72:341–54.10.1016/S0301-7516(03)00109-1 ↗
35. Aram R, Abdollahy M, Pourghahramani P, Darban AK, Mohseni M. Dissolution of mechanically activated sphalerite in the wet and dry milling conditions. Powder Technol. 2021;386:275–85.10.1016/j.powtec.2021.03.011 ↗
36. Ebadi H, Pourghahramani P. Effects of mechanical activation modes on microstructural changes and reactivity of ilmenite concentrate. Hydrometallurgy. 2019;188:38–46.10.1016/j.hydromet.2019.06.001 ↗
37. Li C, Liang B, Guo L-h. Dissolution of mechanically activated Panzhihua ilmenites in dilute solutions of sulphuric acid. Hydrometallurgy. 2007;89:1–10.10.1016/j.hydromet.2007.04.002 ↗
38. Kim HN, Kim JW, So B-D, Keehm Y, Lee BH, Kim JC. Formation of talc fault gouge analog using high-energy ball mill. Geosci J. 2022;26:703–13.10.1007/s12303-022-0012-3 ↗
39. Mhadhbi M. Effect of milling parameters on DEM modeling of a planetary ball mill. Adv Mater Phys Chem. 2023;13:49–58.10.4236/ampc.2023.134004 ↗
40. Mukhtar N, Borhan M, Rusop M, Abdullah S. Effect of milling time on particle size and surface morphology of commercial zeolite by planetary ball mill. Adv Mater Res. 2013;795:711–5.10.4028/www.scientific.net/AMR.795.711 ↗
41. Lv Y-J, Su J, Long Y-F, Cui X-R, Lv X-Y, Wen Y-X. Effects of ball-to-powder weight ratio on the performance of LiFePO4/C prepared by wet-milling assisted carbothermal reduction. Powder Technol. 2014;253:467–73.10.1016/j.powtec.2013.12.013 ↗
42. Khalid MK, Hamuyuni J, Agarwal V, Pihlasalo J, Haapalainen M, Lundström M. Sulfuric acid leaching for capturing value from copper rich converter slag. J Clean Prod. 2019;215:1005–13.10.1016/j.jclepro.2019.01.083 ↗
43. Ebadi H, Pourghahramani P, Dehgani E, Ganjeh M. Studying ilmenite dissolution using mechanical activation method. J Min Environ. 2019;10:763–76.
44. Li C, Liang B, Guo L-h, Wu Z-b. Effect of mechanical activation on the dissolution of Panzhihua ilmenite. Miner Eng. 2006;19:1430–8.10.1016/j.mineng.2006.02.005 ↗
45. Yanagisawa K, Ovenstone J. Crystallization of anatase from amorphous titania using the hydrothermal technique: effects of starting material and temperature. J Phys Chem B. 1999;103:7781–7.10.1021/jp990521c ↗
46. Jia L, Liang B, Lü L, Yuan S, Zheng L, Wang X, et al. Beneficiation of titania by sulfuric acid pressure leaching of Panzhihua ilmenite. Hydrometallurgy. 2014;150:92–8.10.1016/j.hydromet.2014.09.016 ↗
47. Min C, Xuan X. Effect of milling time on carbothermic reduction of ilmenite. Trans Nonferrous Met Soc China. 2015;25:4201–6.10.1016/S1003-6326(15)64070-5 ↗
48. Luo Z, Shu J, Chen M, Wang R, Zeng X, Yang Y, et al. Enhanced leaching of manganese from low-grade pyrolusite using ball milling and electric field. Ecotoxicol Environ Saf. 2021;211:111893.10.1016/j.ecoenv.2021.111893 ↗
49. El-Hazek N, Lasheen T, El-Sheikh R, Zaki SA. Hydrometallurgical criteria for TiO2 leaching from Rosetta ilmenite by hydrochloric acid. Hydrometallurgy. 2007;87:45–50.10.1016/j.hydromet.2007.01.003 ↗
50. Razavi R, Hosseini SMA, Ranjbar M. Production of nanosized synthetic rutile from ilmenite concentrate by sonochemical HCl and H2SO4 leaching. Iran J Chem Chem Eng (IJCCE). 2014;33:29–36.
51. Vásquez R, Molina A. Effects of thermal preoxidation on reductive leaching of ilmenite. Miner Eng. 2012;39:99–105.10.1016/j.mineng.2012.05.003 ↗
52. Mehdilo A, Irannajad M. Iron removing from titanium slag for synthetic rutile production. Physicochem Probl Miner Process. 2012;48:425–39.
53. Wahyuningsih S, Hidayatullah H, Pramono E. Optimizing of TiO2 separation from Bangka ilmenite by leaching process using HCl. ALCHEMY jurnal penelitian kimia. 2014;10:54–68.10.20961/alchemy.10.1.16.54-68 ↗
54. Setyani E, Rahman TP, Nugroho DW, Rahman S, Irawan F, Ikono R, et al. The effect of roasting temperature at 400C and sulphuric acid concentration on TiO2 extraction process from zircon sand ilmenite. Jurnal Fisika dan Aplikasinya. 2014;10:109–12.10.12962/j24604682.v10i3.787 ↗
55. Fattahpour M, Noaparast M, Shafaei Z, Jozanikohan G, Gharabaghi M. The modeling and optimization of titanium dioxide extraction, case study: the slag sample of blast furnace. Int J Min Geo-Eng. 2021;55:91–6.
56. Rodriguez MH, Rosales GD, Pinna EG, Tunez FM, Toro N. Extraction of titanium from low-grade ore with different leaching agents in autoclave. Metals. 2020;10:497.10.3390/met10040497 ↗
57. Anbia M, Ahmadian F, Rezaie M. Preparation of titanium dioxide nanostructure from ilmenite through sulfate-leaching process and solvent extraction by D2EHPA. J Iran Chem Soc. 2018;15:2533–40.10.1007/s13738-018-1441-9 ↗
58. Kurniawan M, Imami T, Ichlas Z, Hidayat T, Mubarok M. Production of synthetic rutile from tin ore beneficiation byproduct through preoxidation and reductive leaching in hydrochloric acid. Sci Rep. 2022;12:9092.10.1038/s41598-022-13250-w ↗
59. Charitha T, Leshan U, Shanitha M, Ramanee W, Buddi L, Martin B. Efficient photodegradation activity of α-Fe2O3/Fe2TiO5/TiO2 and Fe2TiO5/TiO2 nanocomposites synthesized from natural ilmenite. Results Mater. 2021;12:100219.10.1016/j.rinma.2021.100219 ↗
60. Palliyaguru L, Kulathunga US, Jayarathna LI, Jayaweera CD, and Jayaweera PM. A simple and novel synthetic route to anatase TiO2 nanopowder from natural ilmenite via H3PO4/NH3 process.
61. Rajakaruna TPB, Udawatte CP, Chandrajith R, Rajapakse RMG. Nonhazardous process for extracting pure titanium dioxide nanorods from geogenic ilmenite. ACS Omega. 2020;5:16176–82.10.1021/acsomega.0c01756 ↗
62. Yu S, and Wai AM. Upgrading of titanium dioxide from ilmenite concentrate. PhD diss., MERAL Portal, 2020.
63. Mozammel M, Mohammadzadeh A. The influence of pre-oxidation and leaching parameters on Iranian ilmenite concentrate leaching efficiency: optimization and measurement. Measurement. 2015;66:184–94.10.1016/j.measurement.2015.02.025 ↗
64. Firdaus I, Roniyus M, and Posman M. Synthesis and characterization of TiO2 from Lampung’s Iron Sand using leaching method with temperature variation. Jurnal Fisika dan Aplikasinya 2021; 17(2).10.12962/j24604682.v17i2.7921 ↗
65. Nguyen TL, Dinh Quoc V, Nguyen TL, Le TTT, Dinh TK, Nguyen VT, et al. Visible‐light‐driven SO42-/TiO2 photocatalyst synthesized from Binh Dinh (Vietnam) ilmenite ore for Rhodamine B degradation. J Nanomater. 2021;2021:8873181.10.1155/2021/8873181 ↗
66. Gharakhlou AR, Sarvi MN. Synthesis of mesoporous nanoparticles of TiO2 from ilmenite. Mater Res Express. 2017;4:025027.10.1088/2053-1591/aa5bab ↗
67. Hiraki T, Maruyama Y, Suzuki Y, Itoh S, Nagasaka T. Up-grading of natural ilmenite ore by combining oxidation and acid leaching. Int J Miner Metall Mater. 2018;25:729–36.10.1007/s12613-018-1620-9 ↗
68. Lavasani SH, Sarvi MN, Azimi E. Synthesis of well-ordered mesoporous nanoparticles of TiO2 from ilmenite with enhanced photocatalytic activity. Mater Res Express. 2019;6:115503.10.1088/2053-1591/ab439c ↗
69. Gao L, Rao B, Dai H, Xie H, Wang P, Ma F. Kinetics of sulphuric acid leaching of titanium from refractory anatase under atmospheric pressure. Physicochem Probl Miner Process. 2019;55:467–78.
70. Ramakokovhu MM, Olubambi PA, Mbaya RKK, Mojisola T, Teffo ML. Mineralogical and leaching characteristics of altered ilmenite beach placer sands. Minerals. 2020;10:1022.10.3390/min10111022 ↗
71. Daba K, Ramakokovhu MM, Mojisola T, Shongwe MB, Ntholeng N. Iron extraction from South African ilmenite concentrate leaching by hydrochloric acid (HCl) in the presence of reductant (metallic Fe) and additive (MgSO4). Minerals. 2022;12:1336.10.3390/min12101336 ↗
72. Ibrahim SA, Yunus F, Ariffin KS, Sheikh Abdul Hamid SAR, Ismail S, Jabit NA. The removal of Fe from the reduced ilmenite via aeration leaching assessing the effect of operating parameters. Physicochem Probl Miner Process. 2021;57:182–95.
73. Wahyuningsih S, Ramelan A, Pramono E, Argawan P, Djatisulistya A, Firdiyono F, Sulistiyono E, Sari P. The effects of leaching process to the TiO2 synthesis from Bangka ilmenite, in: IOP conference series: materials science and engineering, IOP Publishing, 2018, pp. 012049.10.1088/1757-899X/333/1/012049 ↗
74. Testino A, Bellobono IR, Buscaglia V, Canevali C, D’Arienzo M, Polizzi S, et al. Optimizing the photocatalytic properties of hydrothermal TiO2 by the control of phase composition and particle morphology. A systematic approach. J Am Chem Soc. 2007;129:3564–75.10.1021/ja067050+ ↗
75. Nakade S, Matsuda M, Kambe S, Saito Y, Kitamura T, Sakata T, et al. Dependence of TiO2 nanoparticle preparation methods and annealing temperature on the efficiency of dye-sensitized solar cells. J Phys Chem B. 2002;106:10004–10.10.1021/jp020051d ↗
76. Wang P, Zakeeruddin SM, Moser J-E, Grätzel M. A new ionic liquid electrolyte enhances the conversion efficiency of dye-sensitized solar cells. J Phys Chem B. 2003;107:13280–5.10.1021/jp0355399 ↗
77. Shu W, Liu Y, Peng Z, Chen K, Zhang C, Chen W. Synthesis and photovoltaic performance of reduced graphene oxide–TiO2 nanoparticles composites by solvothermal method. J Alloys Compd. 2013;563:229–33.10.1016/j.jallcom.2013.02.086 ↗
78. Liu X, Zhang L, Xu H, Jiang J, Peng M, Wu P. Pore size-tunable titanosilicates post-synthesized from germanosilicate by structural reorganization and H2TiF6-assisted isomorphous substitution. Appl Catal A Gen. 2018;550:11–9.10.1016/j.apcata.2017.10.017 ↗
79. Mihankhah T, Delnavaz M, Khaligh NG. Application of TiO2 nanoparticles for eco-friendly biodiesel production from waste olive oil. Int J Green Energy. 2018;15:69–75.10.1080/15435075.2018.1423975 ↗
80. Vanrenterghem B, Bele M, Zepeda F, Šala M, Hodnik N, Breugelmans T. Cutting the Gordian Knot of electrodeposition via controlled cathodic corrosion enabling the production of supported metal nanoparticles below 5 nm. Appl Catal B Environ. 2018;226:396–402.10.1016/j.apcatb.2017.12.080 ↗
81. Endrődi B, Sandin S, Smulders V, Simic N, Wildlock M, Mul G, et al. Towards sustainable chlorate production: the effect of permanganate addition on current efficiency. J Clean Prod. 2018;182:529–37.10.1016/j.jclepro.2018.02.071 ↗
82. Low J, Qiu S, Xu D, Jiang C, Cheng B. Direct evidence and enhancement of surface plasmon resonance effect on Ag-loaded TiO2 nanotube arrays for photocatalytic CO2 reduction. Appl Surf Sci. 2018;434:423–32.10.1016/j.apsusc.2017.10.194 ↗
83. Zhu J, Zheng W, He B, Zhang J, Anpo M. Characterization of Fe–TiO2 photocatalysts synthesized by hydrothermal method and their photocatalytic reactivity for photodegradation of XRG dye diluted in water. J Mol Catal A Chem. 2004;216:35–43.10.1016/j.molcata.2004.01.008 ↗
84. Ruiz AM, Cornet A, Shimanoe K, Morante JR, Yamazoe N. Transition metals (Co, Cu) as additives on hydrothermally treated TiO2 for gas sensing. Sens Actuators B Chem. 2005;109:7–12.10.1016/j.snb.2005.03.007 ↗
85. Ho W, Jimmy CY, Lee S. Low-temperature hydrothermal synthesis of S-doped TiO2 with visible light photocatalytic activity. J Solid State Chem. 2006;179:1171–6.10.1016/j.jssc.2006.01.009 ↗
86. Ramakrishnan VM, Natarajan M, Santhanam A, Asokan V, Velauthapillai D. Size controlled synthesis of TiO2 nanoparticles by modified solvothermal method towards effective photo catalytic and photovoltaic applications. Mater Res Bull. 2018;97:351–60.10.1016/j.materresbull.2017.09.017 ↗
87. Akhtar J, Amin NAS. A review on process conditions for optimum bio-oil yield in hydrothermal liquefaction of biomass. Renew Sustain Energy Rev. 2011;15:1615–24.10.1016/j.rser.2010.11.054 ↗
88. Tian J, Zhao Z, Kumar A, Boughton RI, Liu H. Recent progress in design, synthesis, and applications of one-dimensional TiO2 nanostructured surface heterostructures: a review. Chem Soc Rev. 2014;43:6920–37.10.1039/C4CS00180J ↗
89. Sheng X, Chen L, Xu T, Zhu K, Feng X. Understanding and removing surface states limiting charge transport in TiO2 nanowire arrays for enhanced optoelectronic device performance. Chem Sci. 2016;7:1910–3.10.1039/C5SC04076K ↗
90. Li J, Wang C, Zheng P, Zhang L, Chen G, Tang C, et al. Solvothermal preparation of micro/nanostructured TiO2 with enhanced lithium storage capability. Mater Chem Phys. 2017;190:202–8.10.1016/j.matchemphys.2016.12.049 ↗
91. Lee CH, Kim KH, Jang KU, Park SJ, Choi HW. Synthesis of TiO2 nanotube by hydrothermal method and application for dye-sensitized solar cell. Mol Cryst Liq Cryst. 2011;539:125–465.10.1080/15421406.2011.566078 ↗
92. Chen X, Mao SS. Titanium dioxide nanomaterials: synthesis, properties, modifications, and applications. Chem Rev. 2007;107:2891–959.10.1021/cr0500535 ↗
93. Caruso RA, Chen D, Huang F, Cheng YB. Mesoporous anatase TiO 2beads with high surface areas and controllable pore sizes: a superior candidatefor high-performance dye-sensitized solar cells. Adv Mater. 2009;21(21):2206–10.10.1002/adma.200802603 ↗
94. Ismail AA, Bahnemann DW. Mesoporous titania photocatalysts: preparation, characterization and reaction mechanisms. J Mater Chem. 2011;21:11686–707.10.1039/c1jm10407a ↗
95. Dar MI, Chandiran AK, Grätzel M, Nazeeruddin MK, Shivashankar SA. Controlled synthesis of TiO2 nanoparticles and nanospheres using a microwave assisted approach for their application in dye-sensitized solar cells. J Mater Chem A. 2014;2:1662–7.10.1039/C3TA14130F ↗
96. Mbonyiryivuze A, Zongo S, Diallo A, Bertrand S, Minani E, Yadav LL, Mwakikunga BW, Dhlamini SM, Maaza M. Titanium dioxide nanoparticles biosynthesis for dye sensitized solar cells application, (2015).
97. Melcarne G, De Marco L, Carlino E, Martina F, Manca M, Cingolani R, et al. Surfactant-free synthesis of pure anatase TiO2 nanorods suitable for dye-sensitized solar cells. J Mater Chem. 2010;20:7248–54.10.1039/c0jm01167c ↗
98. Liu N, Chen X, Zhang J, Schwank JW. A review on TiO2-based nanotubes synthesized via hydrothermal method: formation mechanism, structure modification, and photocatalytic applications. Catal Today. 2014;225:34–51.10.1016/j.cattod.2013.10.090 ↗
99. Bregadiolli BA, Fernandes SL, d.O. Graeff CF. Easy and fast preparation of TiO2-based nanostructures using microwave assisted hydrothermal synthesis. Mater Res. 2017;20:912–9.10.1590/1980-5373-mr-2016-0684 ↗
100. Sahu N, Parija B, Panigrahi S. Fundamental understanding and modeling of spin coating process: a review. Indian J Phys. 2009;83:493–502.10.1007/s12648-009-0009-z ↗