Computational study of unsteady Homann type flow of ternary hybrid nanofluid in the presence of induced magnetic forces and time relaxation
Source abstract
Abstract
Thermal and mass management is one of the major components of material processing in various productive industries. A significant predictive analytical way is presented in this work to predict the heat and mass exchange during many industrial processes. More specifically, this work is very relevant to exploring the physics of ternary hybrid nanofluid (THNF), induced magnetic field, first-order chemical reaction, Darcy Forchheimer effects, suction/injection, modified heat and mass fluxes effects. The convective surface constraints are imposed to address the surface behavior of the dynamic disk. The typical potential Homann-type flow equations and the thermal and mass balance aspects are mathematically expressed via a set of nonlinear flow, thermal, mass, and induced magnetic field equations. However, the material composition is based on the effective inclusion of nanoparticles, CoFe2O4, ZnO and Au in the base liquid ethylene glycols. The influence of such physical factors is described through explicit graphical and numerical tables, while using the modified collocation method. Moreover, the valid behaviors of each controlling parameter are presented through the THNF temperature, concentration, velocity, resistive forces, and induced magnetic field. The ratio of stress and strain caused a significant enhancement in the flow components of the material. The thermal expansion factor reduced the material temperature significantly away from the surface. The Darcy and non-Darcy Forchiemer factors both cause a reduction in the flow speed of the composite THNF materials. The ratio of strain rate and disk linear deformation enhanced the flow speed, and a reduction is noted for the higher Eckert and thermal relaxation factor. The Biot number appeared in the surface condition, which decreased the thermal trend of the material. The time relaxation for the mass fraction factor diminished the material concentration, and the same is enhanced via the first chemical reaction factor. An authentic and justified comparison is generated to show the validity of the numerical method.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nanofluid Flow and Heat Transfer · Erosion and Abrasive Machining · Fluid Dynamics and Vibration Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Maatoug S, Abbasi A, Farooq W, Khan SU, Ghachem K, Aich W, et al. Bioconvective Homann flow of tangent hyperbolic nanofluid due to spiraling disk with convective and zero mass flux constraints. J Indian Chem Soc. 2023;100(1):100819. https://doi.org/10.1016/j.jics.2022.100819.10.1016/j.jics.2022.100819 ↗
2. Ahmad L, Abd-Elmonem A, Javed S, Yasir M, Khan U, Yilmaz Y, et al. Dissipative disorder analysis of Homann flow of Walters B fluid with applications to solar thermal energy absorption. Appl Water Sci. 2025;15(1):15. https://doi.org/10.1007/s13201-024-02335-8.10.1007/s13201-024-02335-8 ↗
3. Sarfraz M, Khan M, Al-Zubaidi A, Saleem S. Enhancing energy transport in Homann stagnation-point flow over a spiraling disk with ternary hybrid nanofluids. Case Stud Therm Eng. 2023;49:103134. https://doi.org/10.1016/j.csite.2023.103134.10.1016/j.csite.2023.103134 ↗
4. Kumar S, Choudhary S, Kumari K, Sharma A, Choudhary P. MHD Darcy–Forchheimer flow of SWCNT–H2O nanofluid over a porous stretching sheet. Int J Thermofluids. 2025;26:101064. https://doi.org/10.1016/j.ijft.2025.101064.10.1016/j.ijft.2025.101064 ↗
5. Zhang H, Li K, Liu T, Liu Y, Hu J, Zuo Q, et al. Analysis of radial hydraulic forces in centrifugal pump operation via hierarchical clustering (HC) algorithms. Appl Sci. 2025;15(18):10251. https://doi.org/10.3390/app151810251.10.3390/app151810251 ↗
6. Noriega EF, Mazellier N. Scaling analysis of the swirling wake of a porous disc: application to wind turbines. J Fluid Mech. 2025;1003:A34. https://doi.org/10.1017/jfm.2024.1215.10.1017/jfm.2024.1215 ↗
7. Balla CS, Ramesh A, Kishan N, Rashad AM, Abdelrahman ZMA. Bioconvection in oxytactic microorganism-saturated porous square enclosure with thermal radiation impact. J Therm Anal Calorim. 2020;140(5):2387–95. https://doi.org/10.1007/s10973-019-09009-7.10.1007/s10973-019-09009-7 ↗
8. Dimartino S, Conti M, Mravljak R, Picerni G, Pullen JR. Characterization of pore morphology and performance of 3D-printed porous polymers for chromatography. Ind Eng Chem Res. 2025. https://doi.org/10.1021/acs.iecr.4c04337.10.1021/acs.iecr.4c04337 ↗
9. Zenkour AM, Tantawy RM. Rotating exponentially graded variable-thickness annular piezoelectric porous disks. J Vib Eng Technol. 2025;13(2):166. https://doi.org/10.1007/s42417-024-01676-7.10.1007/s42417-024-01676-7 ↗
10. Paul A, Patgiri B, Sarma N. Mixed convective flow of engine-oil-based non-Newtonian tri-hybrid nanofluid over a porous rotating disk. World J Eng. 2025;22(3):612–26. https://doi.org/10.1108/WJE-01-2024-0025.10.1108/WJE-01-2024-0025 ↗
11. Razaq A, Hayat T, Khan SA, Momani S. ATSS model-based Cattaneo–Christov thermal analysis for entropy-optimized ternary nanomaterial flow with homogeneous–heterogeneous reactions. Alexandria Eng J. 2023;79:390–401. https://doi.org/10.1016/j.aej.2023.08.013.10.1016/j.aej.2023.08.013 ↗
12. Mishra SR, Seada MM, Panda S, Haq I, Baithalu R, Saeed A. Bio-sensing and solar thermal applications for bioconvection of Ree–Eyring fluid with Cattaneo–Christov heat flux and motile microorganisms. Proc Inst Mech Eng Part N. 2025. https://doi.org/10.1177/2397791425135358610.1177/23977914251353586 ↗
13. Khan SA, Hayat T, Alsaedi A. KHA model comprising MoS4 and CoFe2O3 nanoparticles in engine oil with non-similar Darcy–Forchheimer flow, entropy, and Cattaneo–Christov heat flux. Nanoscale Adv. 2023;5(22):6135–47. https://doi.org/10.1039/D3NA00441D.10.1039/D3NA00441D ↗
14. Shamshuddin MD, Panda S, Salawu SO, Mishra SR, Patil VS. Casson ternary nanofluid flow over a stretching surface with Cattaneo–Christov model under thermal effects. Int J Hydrogen Energy. 2025;101:450–60. https://doi.org/10.1016/j.ijhydene.2024.12.426.10.1016/j.ijhydene.2024.12.426 ↗
15. Akinbo BJ, Olajuwon BI. Significance of Cattaneo–Christov heat flux and heat generation/absorption with chemical reaction in Walters’ B fluid through a porous medium. Int J Model Simul. 2025;45(1):137–46. https://doi.org/10.1080/02286203.2023.2188513.10.1080/02286203.2023.2188513 ↗
16. Hussain Z, Ayaz M, Islam S. Cattaneo–Christov heat and mass flux in three-dimensional MHD Jeffrey hybrid nanofluid flow over a bidirectional stretching sheet. ZAMM. 2024;104(8):e202300638. https://doi.org/10.1002/zamm.202300638.10.1002/zamm.202300638 ↗
17. Faridi AA, Khan N, Ali K, Inc M. Impact of magnetic induction on Maxwell hybrid nanofluid flow comprising GO–TiO2 and sodium alginate over a stretching sheet. Multiscale Multidiscip Model Exp Des. 2025;8(5):257. https://doi.org/10.1007/s41939-025-00848-6.10.1007/s41939-025-00848-6 ↗
18. Faridi AA, Khan N, Ali K. Computational analysis of thermal attributes of engine oil with titanium alloy and zinc oxide hybrid nanoparticles over a stretching surface near a stagnation point. J Therm Anal Calorim. 2024;149(9):3833–49. https://doi.org/10.1007/s10973-024-12981-4.10.1007/s10973-024-12981-4 ↗
19. Khalatbari S, Jalili P, Jalili B, Ganji DD. Improvement of heat transfer and flow characteristics of hybrid nanofluids: a comprehensive review. Proc Inst Mech Eng Part E. 2025. . https://doi.org/10.1177/0954408925131878510.1177/09544089251318785 ↗
20. Guedri K, Faridi AA, Iqbal S, Ali K, Jamshed W, Fadhl BM, et al. Heat transfer in magneto-hybrid nanofluids with viscous and joule dissipation: a successive over relaxation analysis. Results Eng. 2025;27:106485. https://doi.org/10.1016/j.rineng.2025.106485.10.1016/j.rineng.2025.106485 ↗
21. Mishra SR, Baithalu R, Panda S. Marangoni boundary-layer flow of electrically conducting hybrid nanofluid with particle shape and thermal radiation effects. In: App hybrid nanofluid Sci Eng. CRC Press; 2025. p. 326–37.10.1201/9781003595786-16 ↗
22. Guedri K, Faridi AA, Ahmad H, Ali K, Jamshed W, Abd-Elmonem A, et al. Thermal analysis of ethylene glycol based tetra hybrid nanofluid flow over a stretchable permeable surface under the influence of induced magnetic field. J Mol Liq. 2025;437:128485. https://doi.org/10.1016/j.molliq.2025.128485.10.1016/j.molliq.2025.128485 ↗
23. Fu C, Huang K, Chen H, Huang B, Zhang W. From fundamental mechanisms to applications and challenges of nanofluid flooding in enhanced oil recovery: a review. Fuel. 2025;396:135317. https://doi.org/10.1016/j.fuel.2025.135317.10.1016/j.fuel.2025.135317 ↗
24. Arif M, Kumam P, Kumam W, Mostafa Z. Heat transfer analysis of radiators using different shaped nanoparticles in water-based ternary hybrid nanofluids: a fractional model. Case Stud Therm Eng. 2022;31:101837. https://doi.org/10.1016/j.csite.2022.101837.10.1016/j.csite.2022.101837 ↗
25. Khan WA, Rashad AM, Abdou MMM, Tlili I. Natural bioconvection flow of nanofluid with gyrotactic microorganisms over a truncated cone. Eur J Mech B Fluids. 2019;75:133–42. https://doi.org/10.1016/j.euromechflu.2019.01.002.10.1016/j.euromechflu.2019.01.002 ↗
26. Wang X, Wen Q, Yang J, Shittu S, Wang X, Zhao X, et al. Heat transfer and flow characteristics of a flat confined loop thermosyphon using ternary hybrid nanofluids. Appl Therm Eng. 2023;221:119758. https://doi.org/10.1016/j.applthermaleng.2022.119758.10.1016/j.applthermaleng.2022.119758 ↗
27. Nabwey HA, El-Kabeir SMM, Rashad AM, Abdou MMM. Gyrotactic microorganism mixed convection flow of nanofluid over a vertical saturated porous surface. Alexandria Eng J. 2022;61(3):1804–22. https://doi.org/10.1016/j.aej.2021.06.080.10.1016/j.aej.2021.06.080 ↗
28. Haq F, Ghazwani HA, Younis J, Ghazwani MH, Alnujaie A. Numerical investigation of heat and mass transfer in ternary hybrid nanofluid flow with activation energy. Int J Energy Res. 2025. https://doi.org/10.1155/er/8061691 .10.1155/er/8061691 ↗
29. Shah SZH, Wahab HA, Ahmad S, Khan U, Ishak A, Sherif ESM, Sajjad M. Numerical investigation of ternary hybrid non-Newtonian nanofluids over an inclined shrinking sheet using artificial neural networks. Adv Math Phys. 2024. https://doi.org/10.1155/2024/4133538 .10.1155/2024/4133538 ↗
30. Sindhu T, Jagadeeshkumar K. Entropy generation and regression analysis of unsteady Carreau ternary hybrid nanofluid flow with electromagnetic and thermal influences. Discover Nano. 2025;20(1):231. https://doi.org/10.1186/s11671-025-04408-2.10.1186/s11671-025-04408-2 ↗
31. Sadiya AB, Sucharitha G. Computational analysis of MHD ternary hybrid nanofluid flow with thermochemical reactions through a porous medium on a rotating stretching sheet. Discover Nano. 2025;20(1):168. https://doi.org/10.1186/s11671-025-04353-0.10.1186/s11671-025-04353-0 ↗
32. Quintino A, Cianfrini M, Ocłoń P, Ricci E, Corcione M. Buoyancy-induced convection of water-based nanofluids from an enclosed heated cylinder. Int J Numer Methods Heat Fluid Flow. 2018;28(11):2734–55. https://doi.org/10.1108/HFF-03-2018-0116.10.1108/HFF-03-2018-0116 ↗
33. Baki A, Wiekhorst F, Bleul R. Advances in magnetic nanoparticle engineering for biomedical applications: a review. Bioengineering Basel. 2021;8(10):134. https://doi.org/10.3390/bioengineering8100134.10.3390/bioengineering8100134 ↗
34. Rasheed HU, Islam S, Zeeshan, Khan W, Khan J, Abbas T. Numerical modeling of unsteady MHD Casson fluid flow with chemical reaction and Hall current. Adv Mech Eng. 2022;14(3):16878132221085429. https://doi.org/10.1177/16878132221085429 .10.1177/16878132221085429 ↗
35. Hasani SASA, Alizadeh A, Jalilian A. Magnetic nanoparticle composites: preparation and applications in hyperthermia treatment. J Nanosci Nanotechnol. 2019;19(6):3360–76. https://doi.org/10.1002/advs.202004951.10.1002/advs.202004951 ↗
36. Shen Y, Lu Q, Li Y. Design criterion and analysis of hybrid-excited vernier reluctance linear machine with slot Halbach PM arrays. IEEE Trans Ind Electron. 2023;70(5):5074–84. https://doi.org/10.1109/TIE.2022.3183278.10.1109/TIE.2022.3183278 ↗
37. Hussain SM, Faridi AA, Ahmad H, Ali K, Iqbal MR, Jamshed W, et al. Irreversibility analysis of magnetized flow of engine oil hybrid nanofluid (Ti6Al4V-ZnO/EO) over a stretching surface. Alexandria Eng J. 2025;127:214–27. https://doi.org/10.1016/j.aej.2025.05.023.10.1016/j.aej.2025.05.023 ↗
38. Faridi AA, Khan N, Ali K. A novel numerical note on the enhanced thermal features of water-ethylene glycol mixture due to hybrid nanoparticles (MnZnFe2O4–Ag) over a magnetized stretching surface. Numer Heat Transf B Fund. 2025;86(4):804–26.10.1080/10407790.2023.2296082 ↗
39. Zahir H, Hussain M, Ahmad H, Faridi AA, Khan N, Abulhassan ME, et al. Solar radiation impact on nanofluid flow and heat transfer between magnetized stretchable discs with variable thermal properties. Sci Rep. 2025;15(1):35847. https://doi.org/10.1038/s41598-025-20704-4.10.1038/s41598-025-20704-4 ↗
40. Ragavi M, Poornima T. Enhanced heat transfer analysis of Ag–Al2O3/water hybrid magneto-convective nanoflow. Discover Nano. 2024;19(1):31. https://doi.org/10.1186/s11671-024-03975-0.10.1186/s11671-024-03975-0 ↗
41. Kong D, Tian X, Li G, Liu C, Niu X, Isaev SA, Penyazkov OG Numerical study of particle deposition and heat transfer characteristics in an S-shaped miniature cooling channel of a gas turbine blade. Powder Technol. 2025. https://doi.org/10.1016/j.powtec.2025.121612.10.1016/j.powtec.2025.121612 ↗
42. Ye L, Zheng T, Wang X, Liang X, Liu C. Evaluating the heat transfer characteristics of mesh-fed slot cooling configuration: influence of slot height and pin-fin arrangement. Appl Therm Eng. 2026;271:126304. https://doi.org/10.1016/j.applthermaleng.2025.126304.10.1016/j.applthermaleng.2025.126304 ↗
43. Wang X, Ye L, Li W, Zheng T, Liang X, Liu C. Film cooling effectiveness in the presence of internal hole random roughness: a comprehensive analysis. Int Commun Heat Mass Transfer. 2025;165:108990. https://doi.org/10.1016/j.icheatmasstransfer.2025.108990.10.1016/j.icheatmasstransfer.2025.108990 ↗
44. Tang K, Lin G, Huang K, Qiao T, Guo Y. Visualized flow boiling regime evolution and diverging flow paths enhancement in manifold microchannel heat sinks. Int J Heat Mass Transfer. 2026;259:128334. https://doi.org/10.1016/j.ijheatmasstransfer.2026.128334.10.1016/j.ijheatmasstransfer.2026.128334 ↗
45. Mahapatra TR, Sidui S. Heat transfer in non-axisymmetric Homann stagnation-point flows toward a stretching sheet. Eur J Mech B Fluids. 2017;65:522–9. https://doi.org/10.1016/j.euromechflu.2017.05.001.10.1016/j.euromechflu.2017.05.001 ↗
46. Mahapatra TR, Gupta AS. Stagnation-point flow toward a stretching surface. Can J Chem Eng. 2003;81:258–63. https://doi.org/10.1002/cjce.5450810210.10.1002/cjce.5450810210 ↗