Non‐Lithographic Fabrication of All‐2D α‐MoTe₂ Dual Gate Transistors

As one of the emerging new transition‐metal dichalcogenides materials, molybdenum ditelluride (α‐MoTe₂) is attracting much attention due to its optical and electrical properties. This study fabricates all‐2D MoTe₂‐based field effect transistors (FETs) on glass, using thin hexagonal boron nitride and thin graphene in consideration of good dielectric/channel interface and source/drain contacts, respectively. Distinguished from previous works, in this study, all 2D FETs with α‐MoTe₂ nanoflakes are dual‐gated for driving higher current. Moreover, for the present 2D dual gate FET fabrications on glass, all thermal annealing and lithography processes are intentionally exempted for fully non‐lithographic method using only van der Waal's forces. The dual‐gate MoTe₂ FET displays quite a high hole and electron mobility over ≈20 cm² V⁻¹ s⁻¹ along with ON/OFF ratio of ≈10⁵ in maximum as an ambipolar FET and also demonstrates high drain current of a few tens‐to‐hundred μA at a low operation voltage. It appears promising enough to drive organic light emitting diode pixels and NOR logic functions on glass.