Perovskite Solar Cells with Extremely High 24.63% Efficiency through Design of Double Electron Transport Layers and Double Luminescent Converter Layers

Abstract Introduction of fluorescent down‐conversion layer inside perovskite solar cells (PSCs) can highly improve the ultraviolet response of the devices and the light stability. However, such a device is usually confronted with the problem of inter‐diffusion with the perovskite absorber layer, which severely limits its further development. To address this problem, herein, this work employs an interfacial dual electron transport layers (ETLs) strategy, sandwiching Cd‐CsPbCl₃:Mn²⁺ luminescent quantum dots within gap of the ETLs, which not only reduces the interface energy level offset, but also improves the nucleation and crystallization kinetics of perovskite films and prevents their diffusion to the perovskite absorber layer. As a result, the efficient synergy effect effectively elevates both the open‐circuit voltage and fill factor of the PSCs, reaching maximum values of 1.181 V and 81.14%, respectively, finally delivering progressively increased device power conversion efficiency (PCE) of 24.32% with significantly improved light stability. To further improve the ultraviolet response, this work further adopts the strategy of dual fluorescent conversion layers inside and outside the PSCs, and finally obtains PCE of 24.63%, which is the best for various luminescent conversion cells. This work opens a new door for the development of efficient and stable photoluminescence conversion PSCs.