Effect of temperature on the performance of Cesium formamidinium lead mixed halide perovskite solar cells
Source abstract
Abstract
For the practical application of the Cesium formamidinium lead mixed halide (FA 0.83Cs 0·17PbI 3-xBr x ) perovskite solar cells, the impact of the operating temperature (T) on the solar cell performance parameters (J sc, V oc, fill factor FF, and η) was investigated using SCAPS-1D simulation. The Br content varied from 0.5 to 2.5. The J sc increased linearly with a rise in T, but on contrary, the V oc decreased linearly. Though the temperature coefficient of J sc was enhanced with the rise of Br content. The lowest temperature coefficient of V oc was obtained for x = 2.5 for the cell of the two defect layers. The cells with a Br content of 0.5 shows the highest degradation due to V oc loss. The η of the cell without defect and with one defect layer slightly improved with rising the temperature to 400 K. This study suggests that the selection of the absorbing layer enormously depends on environmental conditions.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Effective passivation of silicon surface by AZO films: application in bifacial solar cells10.1016/j.solener.2013.09.005 ↗
2. Wide range temperature dependence of analytical photovoltaic cell parameters for silicon solar cells under high illumination conditions10.1016/j.apenergy.2016.09.020 ↗
3. Dynamics and control of recombination process at semiconductor surfaces, interfaces and nano-structures10.1016/j.solener.2005.10.014 ↗
4. Characterization of photovoltaic modules for low-power indoor application10.1016/j.apenergy.2012.07.001 ↗
5. Intensity dependency of photovoltaic cell parameters under high illumination conditions: an analysis10.1016/j.apenergy.2014.07.107 ↗
6. Improved understanding of the electronic and energetic landscapes of perovskite solar cells: high local charge carrier mobility, reduced recombination, and extremely shallow traps10.1021/ja506936f ↗
7. High charge carrier mobilities and lifetimes in organolead trihalide perovskites10.1002/adma.201305172 ↗
8. Midgap states in a‐Si: H and a‐SiGe: H p‐i‐n solar cells and Schottky junctions by capacitance techniques10.1063/1.350444 ↗
9. Intrinsic thermal instability of methylammonium lead trihalide perovskite10.1002/aenm.201500477 ↗
10. Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells10.1039/c3ee43822h ↗
11. Spontaneous low-temperature crystallization of α-FAPbI3 for highly efficient perovskite solar cells10.1016/j.scib.2019.08.029 ↗
12. A facile deposition of large grain and phase pure α-FAPbI3 for perovskite solar cells via a flash crystallization10.1016/j.mtener.2017.07.010 ↗
13. Formamidinium and cesium hybridization for photo- and moisture-stable perovskite solar cell10.1002/aenm.201501310 ↗
14. Electronic band structure and carrier concentration of formamidinium–cesium mixed cation lead mixed halide hybrid perovskites10.1063/1.5016829 ↗
15. Composition-tuned wide bandgap perovskites: from grain engineering to stability and performance improvement10.1002/adfm.201803130 ↗
16. Solution-Processed MoOx hole-transport layer with F4-TCNQ modification for efficient and stable inverted perovskite solar cells10.1021/acsaem.9b01004 ↗
17. Prospects of e-beam evaporated molybdenum oxide as a hole transport layer for perovskite solar cells10.1063/1.4996784 ↗
18. Performance analysis of cesium formamidinium lead mixed halide based perovskite solar cell with MoOx as hole transport material via SCAPS-1D10.1016/j.ijleo.2020.166202 ↗
19. Effect of bismuth iodide (BiI3) interfacial layer with different HTL's in FAPI based perovskite solar cell – SCAPS – 1D study10.1016/j.solener.2021.02.041 ↗
20. Performance investigation of cesium formamidinium lead mixed halide (FA0.83Cs0.17PbI3-xBrx) for different iodine and bromine ratios10.1016/j.micrna.2022.207305 ↗
21. Computational analysis of bandgap tuning, admittance and impedance spectroscopy measurements in lead-free MASnI3 perovskite solar cell device10.1002/er.7942 ↗
22. A computational approach to investigate the suitable ETL for lead-free CsGeI3 based perovskite solar cell
23. Evidence of improved power conversion efficiency in lead-free CsGeI3 based perovskite solar cell heterostructure via scaps simulation
24. Investigating the potential of lead-free double perovskite Cs2AgBiBr6 material for solar cell applications: a theoretical study10.1002/er.8099 ↗
25. Temperature impact on perovskite solar cells under operation10.1002/cssc.201802899 ↗
26. Tailoring solvent coordination for high-speed, room-temperature blading of perovskite photovoltaic films10.1126/sciadv.aax7537 ↗
27. High-temperature perovskite solar cells10.1002/solr.202170091 ↗
28. Optimisation of annealing temperature for low temperature processed inverted structure Caesium Formamidinium Lead Triiodide perovskite solar cells10.1016/j.mssp.2019.06.015 ↗
29. Achieving small temperature coefficients in carbon-based perovskite solar cells by enhancing electron extraction10.1002/adom.202201598 ↗
30. Perceiving the temperature coefficients of carbon-based perovskite solar cells10.1039/D0SE00782J ↗
31. Enlightening the temperature coefficient of triple mesoscopic CH3NH3PbI3−xClx/NiO and double mesoscopic CsFAMAPbI3−xBrx/CuSCN carbon perovskite solar cells
32. Lead-free perovskite solar cell byUsing SCAPS-1D: design and simulation
33. Sze · 2021
34. Temperature dependence of solar cell performance—an analysis10.1016/j.solmat.2012.02.019 ↗
35. Temperature-dependent performance of silicon solar cells with polysilicon passivating contacts10.1016/j.solmat.2021.111020 ↗