Copper Particle Sintering for Low‐Temperature Electronic Joining: A Review of Materials Design and Processing Strategies
Source abstract
Abstract
Low‐temperature copper (Cu) sinter‐bonding has emerged as a promising alternative for conductive layers in electronic parts and die‐attachment in power electronics packaging, particularly for packaging wide‐bandgap (WBG) semiconductors such as silicon carbide (SiC) and gallium nitride (GaN). WBG devices operate at higher temperatures and require bonding materials with superior thermal and mechanical properties. Compared to conventional soldering techniques, Cu sinter‐bonding offers enhanced electrical and thermal conductivity, better resistance to electrochemical migration, and lower material costs. However, challenges such as the oxidation of Cu particles, achieving optimal densification, and controlling processing conditions must be addressed for its widespread application. In this review, the mechanisms of Cu sinter‐bonding, key sintering parameters, and recent advances in Cu paste formulations, including surface modification, hybrid particle systems, and alloying with additional metals, are summarized. Optimization strategies for pressure, temperature, solvent, atmosphere, and substrate metallization to improve the performance of Cu joints are discussed in detail. The potential of Cu sinter‐bonding in next‐generation electronic packaging is analyzed, along with challenges and future research directions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Division of Materials Science and Engineering Faculty of Engineering Hokkaido University Sapporo Hokkaido Japan
Department of Chemical Engineering Faculty of Engineering Chulalongkorn University Bangkok Thailand
Funding
Japan Society for the Promotion of Science · Japan Science and Technology Corporation · JKA Foundation
References (100+)
Show source-provided references
1. 10.1016/j.mee.2017.11.02110.1016/j.mee.2017.11.021 ↗
2. 10.1109/JESTPE.2019.295180110.1109/JESTPE.2019.2951801 ↗
3. 10.1016/B978-0-323-99216-9.00039-110.1016/B978-0-323-99216-9.00039-1 ↗
4. 10.1109/ACCESS.2018.288528510.1109/ACCESS.2018.2885285 ↗
5. 10.1007/s11664‐016‐4435‐310.1007/s11664‐016‐4435‐3 ↗
6. 10.1016/j.microrel.2013.06.01010.1016/j.microrel.2013.06.010 ↗
7. 10.1016/j.microrel.2012.02.01810.1016/j.microrel.2012.02.018 ↗
8. 10.1016/j.jallcom.2024.17780110.1016/j.jallcom.2024.177801 ↗
9. 10.1109/TCPMT.2010.210043210.1109/TCPMT.2010.2100432 ↗
10. 10.1021/acsami.5b0213410.1021/acsami.5b02134 ↗
11. 10.1149/1.242380610.1149/1.2423806 ↗
12. 10.1038/s41598‐023‐27870‐310.1038/s41598‐023‐27870‐3 ↗
13. 10.1007/s11664‐015‐3982‐310.1007/s11664‐015‐3982‐3 ↗
14. 10.1016/j.matdes.2016.06.09910.1016/j.matdes.2016.06.099 ↗
15. 10.1016/j.microrel.2019.04.02410.1016/j.microrel.2019.04.024 ↗
16. 10.1016/j.microrel.2017.01.01010.1016/j.microrel.2017.01.010 ↗
17. 10.1109/28.6753610.1109/28.67536 ↗
18. 10.1143/JPSJ.9.35910.1143/JPSJ.9.359 ↗
19. 10.1016/0040‐6090(86)90422‐010.1016/0040‐6090(86)90422‐0 ↗
20. 10.1016/j.actamat.2005.01.04710.1016/j.actamat.2005.01.047 ↗
21. 10.1007/978-3-319-99256-3_510.1007/978-3-319-99256-3_5 ↗
22. 10.1007/978-3-319-45098-8_1410.1007/978-3-319-45098-8_14 ↗
23. 10.3390/ma309462610.3390/ma3094626 ↗
24. 10.1039/C5RA25058G10.1039/C5RA25058G ↗
25. 10.1016/j.apt.2020.10.00410.1016/j.apt.2020.10.004 ↗
26. 10.1016/j.microrel.2013.07.04210.1016/j.microrel.2013.07.042 ↗
27. 10.1016/j.ultsonch.2017.10.00310.1016/j.ultsonch.2017.10.003 ↗
28. 10.1039/C5CP06107E10.1039/C5CP06107E ↗
29. 10.1016/j.apt.2017.05.00610.1016/j.apt.2017.05.006 ↗
30. 10.1016/S1003‐6326(19)65058‐210.1016/S1003‐6326(19)65058‐2 ↗
31. 10.1038/s41528‐024‐00331‐110.1038/s41528‐024‐00331‐1 ↗
32. 10.1557/opl.2013.56210.1557/opl.2013.562 ↗
33. 10.1016/j.poly.2024.11731910.1016/j.poly.2024.117319 ↗
34. 10.3390/nano1203036010.3390/nano12030360 ↗
35. 10.1063/5.022124410.1063/5.0221244 ↗
36. 10.1021/jacs.3c0915810.1021/jacs.3c09158 ↗
37. 10.1016/j.apsusc.2022.15442210.1016/j.apsusc.2022.154422 ↗
38. 10.1039/C5NR00956A10.1039/C5NR00956A ↗
39. 10.1016/j.actamat.2020.11656910.1016/j.actamat.2020.116569 ↗
40. 10.1016/j.apsusc.2020.14860910.1016/j.apsusc.2020.148609 ↗
41. 10.1007/s10854‐023‐10833‐910.1007/s10854‐023‐10833‐9 ↗
42. 10.1016/j.matlet.2020.12765610.1016/j.matlet.2020.127656 ↗
43. 10.1038/srep4515010.1038/srep45150 ↗
44. 10.1016/j.scriptamat.2016.04.01810.1016/j.scriptamat.2016.04.018 ↗
45. 10.1016/j.matlet.2020.12826010.1016/j.matlet.2020.128260 ↗
46. R.Gao J.Li Y.‐A.Shen andH.Nishikawa “A Cu‐Cu Bonding Method Using Preoxidized Cu Microparticles under Formic Acid Atmosphere ” in2019 International Conference on Electronics Packaging (ICEP)(IEEE 2019) 159–162 https://doi.org/10.23919/ICEP.2019.8733490.10.23919/ICEP.2019.8733490 ↗
47. 10.1039/C5RA06599B10.1039/C5RA06599B ↗
48. H.‐J.Huang M.‐B.Zhou andX.‐P.Zhang “Extraordinarily Enhanced Sintering Performance of Pressureless Sinterable Cu Nanoparticle Paste for Achieving Robust Die‐Attach Bonding by Using Reducing Hybrid Solvent ” in2021 IEEE 71st Electronic Components and Technology Conference (ECTC)(IEEE 2021) 583–589 https://doi.org/10.1109/ECTC32696.2021.00104.10.1109/ECTC32696.2021.00104 ↗
49. 10.1016/j.apsusc.2021.15122010.1016/j.apsusc.2021.151220 ↗
50. 10.1016/j.jmrt.2023.03.15610.1016/j.jmrt.2023.03.156 ↗
51. 10.1007/s10853‐023‐08976‐510.1007/s10853‐023‐08976‐5 ↗
52. 10.1016/S1003‐6326(21)65610‐810.1016/S1003‐6326(21)65610‐8 ↗
53. 10.1039/C6TC04360G10.1039/C6TC04360G ↗
54. 10.1016/j.jallcom.2017.10.19310.1016/j.jallcom.2017.10.193 ↗
55. 10.1007/s10854‐021‐07551‐510.1007/s10854‐021‐07551‐5 ↗
56. 10.1039/C1JM12108A10.1039/C1JM12108A ↗
57. 10.1016/j.apsusc.2023.15832610.1016/j.apsusc.2023.158326 ↗
58. 10.1016/j.jmst.2022.10.03810.1016/j.jmst.2022.10.038 ↗
59. 10.1021/acsaelm.1c0072110.1021/acsaelm.1c00721 ↗
60. S. W.Park R.Uwataki S.Nagao et al. “Low‐Pressure Sintering Bonding with Cu and CuO Flake Paste for Power Devices ” in2014 IEEE 64th Electronic Components and Technology Conference (ECTC)(IEEE 2014) 1179–1182 https://doi.org/10.1109/ECTC.2014.6897439.10.1109/ECTC.2014.6897439 ↗
61. 10.4071/2380‐4505‐2019.1.00038710.4071/2380‐4505‐2019.1.000387 ↗
62. 10.1039/C4TC00240G10.1039/C4TC00240G ↗
63. 10.3390/nano1223424110.3390/nano12234241 ↗
64. 10.1007/s10854‐022‐08119‐710.1007/s10854‐022‐08119‐7 ↗
65. 10.2320/matertrans.MT‐N202100410.2320/matertrans.MT‐N2021004 ↗
66. 10.1007/s11664‐017‐5464‐210.1007/s11664‐017‐5464‐2 ↗
67. 10.1007/s10854‐016‐6220‐810.1007/s10854‐016‐6220‐8 ↗
68. 10.1016/j.actamat.2021.11718210.1016/j.actamat.2021.117182 ↗
69. 10.1111/j.1151‐2916.1989.tb06209.x10.1111/j.1151‐2916.1989.tb06209.x ↗
70. 10.1016/S0927‐796X(98)00009‐610.1016/S0927‐796X(98)00009‐6 ↗
71. 10.1088/0370‐1301/62/12/31010.1088/0370‐1301/62/12/310 ↗
72. 10.1149/1.213329610.1149/1.2133296 ↗
73. 10.1016/j.jmrt.2023.01.01310.1016/j.jmrt.2023.01.013 ↗
74. 10.1016/0001‐6160(67)90203‐910.1016/0001‐6160(67)90203‐9 ↗
75. 10.1016/j.jmrt.2022.01.05210.1016/j.jmrt.2022.01.052 ↗
76. 10.1016/j.mtcomm.2024.10887710.1016/j.mtcomm.2024.108877 ↗
77. 10.1016/j.actamat.2022.11813510.1016/j.actamat.2022.118135 ↗
78. 10.1016/j.commatsci.2016.06.01610.1016/j.commatsci.2016.06.016 ↗
79. 10.1016/j.matlet.2017.03.16610.1016/j.matlet.2017.03.166 ↗
80. 10.2298/SOS0601007R10.2298/SOS0601007R ↗
81. 10.1016/j.microrel.2023.11510510.1016/j.microrel.2023.115105 ↗
82. 10.1016/j.commatsci.2018.10.00110.1016/j.commatsci.2018.10.001 ↗
83. 10.1016/j.actamat.2008.07.02910.1016/j.actamat.2008.07.029 ↗
84. 10.1016/j.apsusc.2025.16274410.1016/j.apsusc.2025.162744 ↗
85. 10.1186/s11671‐017‐2037‐510.1186/s11671‐017‐2037‐5 ↗
86. 10.1016/j.jmrt.2022.05.12210.1016/j.jmrt.2022.05.122 ↗
87. 10.1016/j.rinp.2020.10348610.1016/j.rinp.2020.103486 ↗
88. 10.1109/TDMR.2017.278775610.1109/TDMR.2017.2787756 ↗
89. 10.3390/met1105073010.3390/met11050730 ↗
90. 10.3390/ma1111210510.3390/ma11112105 ↗
91. 10.1021/acsomega.3c0424510.1021/acsomega.3c04245 ↗
92. 10.1016/j.jmatprotec.2024.11843510.1016/j.jmatprotec.2024.118435 ↗
93. 10.1007/s11664‐022‐09634‐310.1007/s11664‐022‐09634‐3 ↗
94. 10.1021/acsami.6b1028010.1021/acsami.6b10280 ↗
95. 10.1016/j.jallcom.2018.09.11510.1016/j.jallcom.2018.09.115 ↗
96. 10.1016/j.jmatprotec.2018.03.00510.1016/j.jmatprotec.2018.03.005 ↗
97. 10.5104/jiepeng.13.E19‐017‐110.5104/jiepeng.13.E19‐017‐1 ↗
98. 10.1016/j.surfin.2024.10417310.1016/j.surfin.2024.104173 ↗
99. J.‐L.Jo K.Anai S.Yamauchi T.Hattori andT.Sakaue “The Bonding Properties of Various Surface Finishes with Cu Paste for Pressure Sintering ” inIEEE 70th Electronic Components and Technology Conference (ECTC)(IEEE 2020) 749–754 https://doi.org/10.1109/ECTC32862.2020.00123.10.1109/ECTC32862.2020.00123 ↗
100. 10.1007/s10854‐025‐14323‐y10.1007/s10854‐025‐14323‐y ↗