Rational Design of Highly Efficient Semi‐Transparent Organic Photovoltaics with Silver Nanowire Top Electrode via 3D Optical Simulation Study
Source abstract
Abstract
Abstract A key factor in improving semi‐transparent organic photovoltaics (ST‐OPVs) performance is achieving high light utilization efficiency (LUE). However, device performance can also be limited by the lack of understanding of light transmission and reflection within the device architecture, and the transmission of the top electrode in particular. Here, highly efficient ST‐OPVs are reported via the rational design of silver nanowire (Ag NW) top electrodes via 3D optical simulation. Due to its careful consideration for the ST‐OPV of the effect of the Ag NW networking structure, estimated average visible transmission (AVT) and ideal short‐circuit current density values from 3D optical simulation closely match those from actual measurements. Optimized ST‐OPVs with Ag NW porosity of 20% and active layer thickness of 150 nm exhibit LUE of 4.15% with a power conversion efficiency of 9.7% and AVT of 42.82%. This work achieves a record‐high LUE in ST‐OPVs reported to date and the first report introducing a 3D optical simulation study.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of ChemistryResearch Institute for Convergence of Basic Sciences and Institute of Nano Science and Technology Hanyang University 222 Wangsimni‐ro, Seongdong‐gu Seoul 04763 Republic of Korea
School of Electrical and Computer Engineering Institute of Information Technology University of Seoul 163 Seoulsiripdaero, Dongdaemun‐gu Seoul 02504 Republic of Korea
Division of Advanced Materials Korea Research Institute of Chemical Technology Gajeong‐ro, Yuseong‐gu Daejeon 34114 Republic of Korea
References (39)
Show source-provided references
1. 10.1002/aenm.20180365710.1002/aenm.201803657 ↗
2. 10.1002/aenm.20190423410.1002/aenm.201904234 ↗
3. 10.1039/C7CS00892A10.1039/C7CS00892A ↗
4. 10.1126/science.aat261210.1126/science.aat2612 ↗
5. 10.1093/nsr/nwz20010.1093/nsr/nwz200 ↗
6. 10.3390/coatings810032910.3390/coatings8100329 ↗
7. 10.1002/aenm.20170179110.1002/aenm.201701791 ↗
8. 10.1002/adfm.20200218110.1002/adfm.202002181 ↗
9. 10.1038/s41560-017-0016-910.1038/s41560-017-0016-9 ↗
10. 10.1063/1.356751610.1063/1.3567516 ↗
11. 10.1039/C9SE00413K10.1039/C9SE00413K ↗
12. 10.1016/j.synthmet.2020.11658210.1016/j.synthmet.2020.116582 ↗
13. 10.1016/j.cap.2020.01.00310.1016/j.cap.2020.01.003 ↗
14. 10.1016/j.cap.2016.12.01010.1016/j.cap.2016.12.010 ↗
15. 10.1002/aenm.20160259910.1002/aenm.201602599 ↗
16. 10.1039/c2ee22623e10.1039/c2ee22623e ↗
17. 10.1063/1.479825410.1063/1.4798254 ↗
18. 10.1002/aenm.20120067910.1002/aenm.201200679 ↗
19. 10.1039/C8EE00154E10.1039/C8EE00154E ↗
20. 10.1021/acs.chemmater.5b0313710.1021/acs.chemmater.5b03137 ↗
21. 10.1021/acsami.9b0411310.1021/acsami.9b04113 ↗
22. 10.1039/C8NR07974A10.1039/C8NR07974A ↗
23. 10.1021/nl903892x10.1021/nl903892x ↗
24. 10.1039/C4NR06033D10.1039/C4NR06033D ↗
25. Lu H. · Appl. Phys. Lett. · 2015 · 106 · 27
26. 10.1002/adfm.20120252310.1002/adfm.201202523 ↗
27. 10.1002/solr.20200032810.1002/solr.202000328 ↗
28. 10.1016/j.joule.2019.01.00410.1016/j.joule.2019.01.004 ↗
29. 10.1063/1.325736110.1063/1.3257361 ↗
30. 10.1007/s13391-020-00248-710.1007/s13391-020-00248-7 ↗
31. 10.1021/am301913w10.1021/am301913w ↗
32. 10.1016/j.dyepig.2018.06.02510.1016/j.dyepig.2018.06.025 ↗
33. 10.1016/j.solmat.2010.02.04110.1016/j.solmat.2010.02.041 ↗
34. 10.1039/D0TC03096A10.1039/D0TC03096A ↗
35. 10.1063/1.473889610.1063/1.4738896 ↗
36. 10.1016/j.orgel.2014.04.01110.1016/j.orgel.2014.04.011 ↗
37. 10.1002/pip.330110.1002/pip.3301 ↗
38. 10.1016/j.jpowsour.2019.02.01510.1016/j.jpowsour.2019.02.015 ↗
39. 10.1016/j.nanoen.2019.01.06110.1016/j.nanoen.2019.01.061 ↗