Effect of annealing temperature-dependent structural, morphological, optical, and electrical properties of hybrid perovskite-based solar cells: experimental and simulation approach

1. M. Alla, V. Manjunath, N. Chawki, D. Singh, S.C. Yadav, M. Rouchdi, F. Boubker, Optimized CH3NH3PbI3-X ClX based perovskite solar cell with theoretical efficiency exceeding 30%. Opt. Mater. 124, 112044 (2022). https://doi.org/10.1016/j.optmat.2022.11204410.1016/j.optmat.2022.112044 ↗

2. C. Ma, N.G. Park, A realistic methodology for 30% efficient perovskite solar cells. Chem 6(6), 1254–1264 (2020). https://doi.org/10.1016/j.chempr.2020.04.01310.1016/j.chempr.2020.04.013 ↗

3. S. Kim, T.T. Trinh, J. Park, D.P. Pham, S. Lee, H.B. Do, N.N. Dang, V.A. Dao, J. Kim, J. Yi, Over 30% efficiency bifacial 4-terminal perovskite heterojunction silicon tandem solar cells with spectral albedo. Sci. Rep. 11(1), 1–10 (2021). https://doi.org/10.1038/s41598-021-94848-410.1038/s41598-021-94848-4 ↗

4. J. Diekmann, P. Caprioglio, Pathways towards 30% efficient perovskite solar cells. Sol. Energy 5(8), 1–13 (2021). https://doi.org/10.1002/solr.20210021910.1002/solr.202100219 ↗

5. H. Benali, B. Hartiti, F. Lmai, A. Batan, S. Fadili, P. Thevenin, Structural, optical, and simulation studies of hybrid perovskite CH3NH3PbI3 using Al-doped ZnO as an ETL and CuSbS2 as a HTL for solar Applications. Iran J. Chemist. Chem. Eng. (2023). https://doi.org/10.30492/ijcce.2023.2006205.610710.30492/ijcce.2023.2006205.6107 ↗

6. H. Benali, B. Hartiti, F. Lmai, A. Batan, S. Fadili, P. Thevenin, Enhancing the efficiency of the organic-inorganic hybrid perovskite cells using Al-doped ZnO as an electron transport layer and CNTs as a hole transport layer: an experimental and numerical study. Optik 304, 171733 (2024). https://doi.org/10.1016/j.ijleo.2024.17173310.1016/j.ijleo.2024.171733 ↗

7. C. Liu, W. Li, C. Zhang, Y. Ma, J. Fan, Y. Mai, All-inorganic CsPbI2Br perovskite solar cells with high efficiency exceeding 13%. J. Am. Chem. Soc. 140, 3825–3828 (2018). https://doi.org/10.1021/jacs.7b1322910.1021/jacs.7b13229 ↗

8. S. Smairi, B. Hartiti, A. Batan, A. Ziti, H.J.T. Nkuissi, C. Rachidy, H. Benali, S. Keles, P. Thevenin, M. Ertugrul, Physical properties of Cu2ZnSnS4 absorber layer deposited by spray pyrolysis: effect of the temperature associated with SCAPS 1D simulation. Physica B : Condens. Matter (2024). https://doi.org/10.1016/j.physb.2024.41631410.1016/j.physb.2024.416314 ↗

9. A. Alsalloum, B. Turedi, X. Zheng, S. Mitra, A. Zhumekenov, K. Lee, P. Maity, I. Gereige, A. AlSaggaf, I. Roqan, Low-temperature crystallization enables 21.9% efficient single-crystal MAPbI3 inverted perovskite solar cells. ACS Energy Lett. 5, 657–662 (2020). https://doi.org/10.1021/acsenergylett.9b0278710.1021/acsenergylett.9b02787 ↗

10. J. Chena, Z. Wan, J. Liu, S.Q. Fu, F. Zhang, S. Yang, S. Taod, M. Wang, C. Chen, Growth of compact CH3NH3PbI3 thin films governed by the crystallization in PbI2 matrix for efficient planar perovskite solar cells. ACS Appl. Mater. Interfaces (2018). https://doi.org/10.1021/acsami.7b1866710.1021/acsami.7b18667 ↗

11. NationalrenewableEnergyLaboratory(NREL)BestResearchCellEfficiencies,(2023)http://www.nrel.gov/ncpv/images/efficiency_chart.jpg.

12. I. Mohanty, U.P. Singh, S. Jana, S. Mangal, Influence of annealing on stability and regeneration of degraded CH3NH3PbI3 thin films. Appl. Phys. A 130, 143 (2024). https://doi.org/10.1007/s00339-023-07263-z10.1007/s00339-023-07263-z ↗

13. D. Prochowicz, M. Frančkevicius, A.M. Cieślak, S.M. Zakeeruddin, M. Grätzel, J. Lewiński, Mechanosynthesis of the hybrid perovskite CH3NH3PbI3: characterization and the corresponding solar cell efficiency. J. Mater. Chem. A 3, 20772–20777 (2015). https://doi.org/10.1039/C5TA04904K10.1039/C5TA04904K ↗

14. S.R. Raga, M.C. Jung, M.V. Lee, M.R. Leyden, Y. Kato, Y. Qi, Influence of air annealing on high efficiency planar structure perovskite solar cells. Chem. Mater. 27(5), 1597–1603 (2015). https://doi.org/10.1021/cm504199710.1021/cm5041997 ↗

15. Z. Xiao, Q. Dong, C. Bi, Y. Shao, Y. Yuan, J. Huang, Solvent annealing of perovskite-induced crystal growth for photovoltaic device efficiency enhancement. Adv. Mater. 26, 6503–6509 (2014). https://doi.org/10.1002/adma.20140168510.1002/adma.201401685 ↗

16. P. You, G. Li, G. Tang, J. Cao, F. Yan, Ultrafast laser-annealing of perovskite films for efficient perovskite solar cells. Energy Environ. Sci. 13, 1187–1196 (2020). https://doi.org/10.1039/C9EE02324K10.1039/C9EE02324K ↗

17. L. Tian, W. Zhang, Yu. Hua, C. Peng, H. Mao, Y. Li, Q. Wang, Y. Huang, Post-treatment of perovskite films towards efficient solar cells via mixed solvent annealing. ACS Appl. Energy Mater. 2(7), 4954–4963 (2019). https://doi.org/10.1021/acsaem.9b0061310.1021/acsaem.9b00613 ↗

18. H.S. Kim, A. Hagfeldt, N.-G. Park, Morphological and compositional progress in halide perovskite solar cells. Chem. Commun. 55(9), 1192–1200 (2019). https://doi.org/10.1039/C8CC08653B10.1039/C8CC08653B ↗

19. A. Dualeh, N. Tétreault, T. Moehl, P. Gao, M.K. Nazeeruddin, M. Grätzel, Effect of annealing temperature on film morphology of organic-inorganic hybrid pervoskite solid-state solar cells. Adv. Funct. Mater. 24(21), 3250–3258 (2014). https://doi.org/10.1002/adfm.20130402210.1002/adfm.201304022 ↗

20. G.A. Nowsherwan, A. Samad, M.A. Iqbal, T. Mushtaq, A. Hussain, M. Malik, S. Haider, P.V. Pham, J.R. Choi, Performance analysis and optimization of a PBDB-T:ITIC based organic solar cell using graphene oxide as the hole transport layer. Nanomaterials 12(1767), 1–14 (2022). https://doi.org/10.3390/nano1210176710.3390/nano12101767 ↗

21. N. Touafek, R. Mahamdi, C. Dridi, Boosting the performance of planar inverted perovskite solar cells employing graphene oxide as HTL. Digest J. Nanomater. Biostruct 16(2), 705–712 (2021). https://doi.org/10.15224/DJNB.2021.16.02.70510.15224/DJNB.2021.16.02.705 ↗

22. V. Craciun, J. Elders, J. Gardeniers, I.W. Boyd, Characteristics of high quality ZnO thin films deposited by pulsed laser deposition. Appl. Phys. Lett. 65, 2963–2965 (1994). https://doi.org/10.1063/1.11247810.1063/1.112478 ↗

23. S. Prasad, S. Bansal, A. Mansoori, M. Bala, P. Sharma, Effect of annealing temperature on excitonic binding energy and other optical properties of Mn-Ni co-doped transparent ZnO thin films. Trans. Indian Ceram. Soc. 82, 31–39 (2023). https://doi.org/10.1080/0371750X.2022.216037610.1080/0371750X.2022.2160376 ↗

24. D.K. Hwang, M.C. Jeong, J.M. Myoung, Characteristics of high quality ZnO thin films deposited by pulsed laser deposition. Appl. Surf. Sci. 225, 217–222 (2004). https://doi.org/10.1016/j.apsusc.2003.10.00310.1016/j.apsusc.2003.10.003 ↗

25. K. Huang, Z. Tang, L. Zhang, J. Yu, J. Lv, X. Liu, F. Liu, Preparation and characterization of Mg-doped ZnO thin films by sol-gel method. Appl. Surf. Sci. 258, 3710–3713 (2012). https://doi.org/10.1016/j.apsusc.2011.12.0110.1016/j.apsusc.2011.12.01 ↗

26. F. Lmai, N. Brihi, Z. Takkouk, K. Guergouri, F. Bouzerara, M. Hage-Ali, Optical and electrical study of deformed hydrogenated bulk Cd0.96Zn0.04Te single crystal. J. Appl. Phys. (2008). https://doi.org/10.1063/1.283648310.1063/1.2836483 ↗

27. H.S. Kim, S.K. Kim, B.J. Kim, K.S. Shin, M.K. Gupta, H.S. Jung, S.-W. Kim, N.G. Park, Ferroelectric polarization in CH3NH3PbI3 perovskite. J. Phys. Chem. Lett. 6, 1729–1735 (2015). https://doi.org/10.1021/acs.jpclett.5b0069510.1021/acs.jpclett.5b00695 ↗

28. R.E. Patru, H. Khassaf, I. Pasuk, M. Botea, L. Trupina, C.P. Ganea, L. Pintilie, I. Pintilie, Tetragonal-cubic phase transition and low-field dielectric properties of CH3NH3PbI3 crystals. Materials 14, 4215 (2021). https://doi.org/10.3390/ma1415421510.3390/ma14154215 ↗

29. A. Yildiz, H. Cansizoglu, R. Abdulrahman, T. Karabacak, Effect of grain size and strain on the bandgap of glancing angle deposited AZO nanostructures. J. Mater. Sci. Mater. Electron. 26, 5952–5957 (2015). https://doi.org/10.1007/s10854-015-3167-010.1007/s10854-015-3167-0 ↗

30. T. Serin, A. Atilgan, I. Kara, A. Yildiz, Electron transport in Al-Cu co-doped ZnO thin films. J. Appl. Phys. 121, 095303 (2017). https://doi.org/10.1063/1.497747010.1063/1.4977470 ↗

31. T. Dammak, N. Fourati, H. Boughzala, A. Mlayah, Y. Abid, X-ray diffraction, vibrational and photoluminescence studies of the self-organized quantum well crystal H3N(CH2)6NH3PbBr4. J. Lumin. 127, 404–408 (2007). https://doi.org/10.1016/j.jlumin.2007.01.01810.1016/j.jlumin.2007.01.018 ↗

32. T. Dammak, S. Elleuch, H. Bougzhala, A. Mlayah, R. Chtourou, Y. Abid, Synthesis, vibrational and optical properties of a new three-layered organic−inorganic perovskite (C4H9NH3)4Pb3I4Br6. J. Lumin. 129, 893–897 (2009). https://doi.org/10.1016/j.jlumin.2009.04.02010.1016/j.jlumin.2009.04.020 ↗

33. C. Quarti, G. Grancini, E. Mosconi, P. Bruno, J.M. Ball, M.M. Lee, D. Angelis, The Raman spectrum of the CH3NH3PbI3 hybrid perovskite: interplay of theory and experiment. J. Phys. Chem. Lett. 5(2), 279–284 (2013). https://doi.org/10.1021/jz402589q10.1021/jz402589q ↗

34. A.M.A. Leguy, A.R. Goñi, J.M. Frost, J. Skelton, F. Brivio, X. Rodríguez-Martínez, O.J. Weber, A. Campoy-Quiles, Dynamic disorder, phonon lifetimes, and the assignments of modes to the vibrational spectra of methylammonium lead halide perovskites. Phys. Chem. Chem. Phys. 18, 27051–27066 (2016). https://doi.org/10.1039/C6CP03474H10.1039/C6CP03474H ↗

35. M.A. Pérez-Osorio, Q. Lin, R.T. Phillips, R.L. Milot, L.M. Herz, M.B. Johnston, F. Giustino, Raman spectrum of the organic–inorganic halide perovskite CH3NH3PbI3 from first principles and high-resolution low-temperature Raman measurements. J. Phys. Chem. C 122, 21703–21717 (2018). https://doi.org/10.1021/acs.jpcc.8b0466910.1021/acs.jpcc.8b04669 ↗

36. A. Mattoni, A. Filippetti, M.I. Saba, C. Caddeo, P. Delugas, Temperature evolution of methylammonium trihalide vibrations at the atomic scale. J. Phys. Chem. Lett. 7, 529–535 (2016). https://doi.org/10.1021/acs.jpclett.5b0254610.1021/acs.jpclett.5b02546 ↗

37. K. Nakada, Y. Matsumoto, Y. Shimoi, K. Yamada, Y. Furukawa, Temperature-dependent evolution of raman spectra of methylammonium lead halide perovskites, CH3NH3PbX3 (X = I, Br). Molecules 24, 626 (2019). https://doi.org/10.3390/molecules2403062610.3390/molecules24030626 ↗

38. Z. Xie, S. Liu, L. Qin, S. Pang, W. Wang, Refractive index and extinction coefficient of CH3NH3PbI3 studied by spectroscopic ellipsometry. Opt. Mater. Express 5, 29–43 (2015). https://doi.org/10.1364/OME.5.00002910.1364/OME.5.000029 ↗

39. M. Shirayama, H. Kadowaki, T. Miyadera, T. Sugita, M. Tamakoshi, M. Kato, T. Fujiseki, D. Murata, S. Hara, T.N. Murakami, S. Fujimoto, M. Chikamatsu, H. Fujiwara, Optical transitions in hybrid perovskite solar cells: ellipsometry, density functional theory, and quantum efficiency analyses for CH3NH3PbI3. Phys. Rev. Appl. 5(1), 014012 (2016). https://doi.org/10.1103/PhysRevApplied.5.01401210.1103/PhysRevApplied.5.014012 ↗

40. B. Farhadi, F. Zabihi, I. Lugoloobi, A. Liu, A hypothesis on optoelectronic behaviour of CH3NH3SnIxBr3–x perovskite: density functional theory approach. Sol. Energy 233, 11–17 (2022). https://doi.org/10.1016/j.solener.2022.01.02210.1016/j.solener.2022.01.022 ↗

41. A.M. El-naggar, M.B. Mohamed, M.M. Osman, Z.K. Heiba, A.M. Kamal, A.M. Aldhafiri, I.M. Alhamss, A.Q. Alanazi, Optical and structural properties of CH3NH3PbI3 perovskite films doped with cesium. Eur. Phys. J. Appl. Phys. 96, 10302 (2021). https://doi.org/10.1051/epjap/202121016010.1051/epjap/2021210160 ↗

42. J. Henry, K. Mohanraj, G. Sivakumar, Electrical and optical properties of CZTS thin films prepared by Silar method. J. Asian Ceram. Soc. 4(1), 81–84 (2016). https://doi.org/10.1016/j.jascer.2015.12.00310.1016/j.jascer.2015.12.003 ↗

43. X. Long, Z. Pan, Z. Zhang, J.J. Urban, H. Wang, Solvent-free synthesis of organometallic halides CH3NH3PbI3 and (CH3NH3)3Bi2I9 and their thermoelectric transport properties. Appl. Phys. Lett. 115, 072104 (2019). https://doi.org/10.1063/1.511353510.1063/1.5113535 ↗

44. R.A. Jabr, M. Hamad, Y.M. Mohanna, Newton-Raphson solution of Poisson’s equation in a Pn diode. Int. J. Electr. Eng. Educ. 44(1), 23–33 (2007). https://doi.org/10.7227/IJEEE.44.1.310.7227/IJEEE.44.1.3 ↗

45. S. Moujoud, B. Hartiti, S. Touhtouh, S. Fadili, A. Faddouli, F. Belhora, M. Stitou, A. Hajjaji, Efficiency enhancement by simulation method of copper antimony disulfide thin film-based solar cells. Mater. Today Commun. (2022). https://doi.org/10.1016/j.mtcomm.2022.10341510.1016/j.mtcomm.2022.103415 ↗

46. A. Elouafi, S.E. Ouahbi, S. Ezairi, A. Tizliouine, H. Lassri, Structural, magnetic, and magnetocaloric studies of the potassium diphosphate KCrP2O7. J. Supercond. Nov. Magn. 36(2), 521–528 (2023). https://doi.org/10.1007/s10948-022-06481-510.1007/s10948-022-06481-5 ↗

47. E. Widianto, E.S. Rosa, K. Triyana, N.M. Nursam, I. Santoso, Performance analysis of carbon-based perovskite solar cells by graphene oxide as hole transport layer: experimental and numerical simulation. Opt. Mater. 121, 111584 (2021). https://doi.org/10.1016/j.optmat.2021.11158410.1016/j.optmat.2021.111584 ↗

48. S. Bhattarai, M.K. Hossain, R. Pandey, J. Madan, D.P. Samajdar, M. Chowdhury, M.F. Rahman, M. Ansari, M.D. Albaqami, Enhancement of efficiency in CsSnI3 based perovskite solar cell by numerical modeling of graphene oxide as HTL and ZnMgO as ETL. Heliyon (2024). https://doi.org/10.1016/j.heliyon.2024.e2410710.1016/j.heliyon.2024.e24107 ↗

49. X. He, L. Wu, X. Hao, J. Zhang, C. Li, W. Wang, L. Feng, Z. Du, The band structures of Zn1-x MgxO (In) and the simulation of CdTe solar cells with a Zn1-x MgxO (In) window layer by SCAPS. Energies 12(2), 291 (2019). https://doi.org/10.3390/en1202029110.3390/en12020291 ↗

50. X. He, S.Q. Ren, L.L. Wu, J.Q. Zhang, X.C. Li, Z. Du, The band structure of Zn1-x MgxO and the simulation of CdTe solar cell with Zn1-x MgxO window layer by SCAPS software. J. Inorg. Mater. 33, 635–640 (2018). https://doi.org/10.4490/en1203038110.4490/en12030381 ↗

51. M. Roumie, F. Lmai, K. Zahraman, A. Zaiour, M. Hage-Ali, On the analysis of H in thin layers of Pt electroless contacts using elastic recoil detection technique. Nucl. Instrum. Methods Phys. Res., Sect. B 341, 44–47 (2014). https://doi.org/10.1016/j.nimb.2014.06.0310.1016/j.nimb.2014.06.03 ↗

52. K. Zahraman, M. Roumie, M. Roumie, A. Raulo, M. Sowinska, G. Ventura, Study of the thickness of the dead layer below electrodes, deposited by the electroless technique, in CdTe nuclear detectors. IEEE Trans. Nucl. Sci. 53(1), 378–382 (2006). https://doi.org/10.1109/TNS.2006.86984610.1109/TNS.2006.869846 ↗

53. I.M. De Los Santos, H.J. Cortina-Marrero, M.A. Ruíz-Sánchez, L. Hechavarría-Difur, F.J. Sánchez-Rodríguez, M. Courel, H. Hu, Optimization of CH3NH3PbI3 perovskite solar cells: a theoretical and experimental study. Sol. Energy (2020). https://doi.org/10.1016/j.solener.2020.02.02610.1016/j.solener.2020.02.026 ↗

54. A.S. Chouhan, N.P. Jasti, S. Avasthi, Effect of interface defect density on performance of perovskite solar cell: correlation of simulation and experiment. Mater. Lett. (2018). https://doi.org/10.1016/j.matlet.2018.03.09510.1016/j.matlet.2018.03.095 ↗

55. X. He, S. Yuehan, W. Lili, L. Chunxiu, Z. Jingquan, F. Lianghuan, Simulation of high-efficiency CdTe solar cells with Zn1-x MgxO window layer by SCAPS software. J. Mater. Res. Express (2018). https://doi.org/10.1088/2053-1591/aacae210.1088/2053-1591/aacae2 ↗

56. S. Benabbas, H. Heriche, Z. Rouabah, N. Chelali, Enhancing the efficiency of CIGS thin film solar cells by inserting novel back surface field (SnS) layer. North African Work Dielectic Mater. Photovolt. Syst. (2014). https://doi.org/10.1109/NAWDMPV.2014.699761110.1109/NAWDMPV.2014.6997611 ↗

57. C. Devi, R. Mehra, Device simulation of lead-free MASnI3 solar cell with CuSbS2 (copper antimony sulfide). J. Mater. Sci. 54, 5615–5624 (2019). https://doi.org/10.1007/s10853-018-03265-y10.1007/s10853-018-03265-y ↗

58. A. Bag, R. Radhakrishnan, R. Nekovei, R. Jeyakumar, Effect of absorber layer, hole transport layer thicknesses, and its doping density on the performance of perovskite solar cells by device simulation. Sol. Energy 196, 177–182 (2020). https://doi.org/10.1016/j.solener.2019.12.01410.1016/j.solener.2019.12.014 ↗

59. G. Koishiyev, J. Sites, Impact of sheet resistance on 2-D modeling of thin-film solar cells. Sol. Energy Mater. Sol. Cells 93, 350–354 (2009). https://doi.org/10.1016/j.solmat.2008.11.01510.1016/j.solmat.2008.11.015 ↗

60. G. Xing, N. Mathews, S. Sun, S. Lim, Y. Lam, M. Grätzel, T. Sum, Long-range balanced electron-and hole-transport lengths in organic-inorganic CH3NH3PbI3. Science 342, 344–347 (2013). https://doi.org/10.1126/science.124316710.1126/science.1243167 ↗

61. L. Pazos-Outón, T. Xiao, E. Yablonovitch, Fundamental efficiency limit of lead iodide perovskite solar cells. J. Phys. Chem. Lett. 9, 1703–1711 (2018). https://doi.org/10.1021/acs.jpclett.7b0305410.1021/acs.jpclett.7b03054 ↗

62. Z. Wu, S. Bai, J. Xiang, Z. Yuan, Y. Yang, W. Cui, X. Gao, Z. Liu, Y. Jin, B. Sun, Efficient planar heterojunction perovskite solar cells employing graphene oxide as hole conductor. Nanoscale 6(18), 10505 (2014). https://doi.org/10.1039/C4NR03181D10.1039/C4NR03181D ↗

63. E. Nouri, M.R. Mohammadi, P. Lianos, Construction of perovskite solar cells using inorganic hole-extracting components. ACS Omega 3, 46 (2018). https://doi.org/10.1021/acsomega.7b0177510.1021/acsomega.7b01775 ↗

64. H. Wang, Z. Yu, X. Jiang, J. Li, B. Cai, X. Yang, L. Sun, Efficient and stable inverted planar perovskite solar cells employing CuI as hole-transporting layer prepared by solid-gas transformation. EnergyTechnol. 5, 1836 (2017). https://doi.org/10.1002/ente.20170042210.1002/ente.201700422 ↗

65. S.J. Lee, H.P. Kim, A.R.B.M. Yusoff, Organic photovoltaic with PEDOT:PSS and V2O5 mixture as hole transport layer. Sol. Energy Mater. Sol. Cells 120, 238 (2014). https://doi.org/10.1016/j.solmat.2013.09.00910.1016/j.solmat.2013.09.009 ↗

66. D. Li, J. Cui, H. Li, D. Huang, M. Wang, Y. Shen, Amino-functionalized conjugated polymer electron transport layers enhance the UV-photostability of planar heterojunction perovskite solar cells. Chem. Sci. 8(6), 4587–4594 (2017). https://doi.org/10.1039/c7sc00077d10.1039/c7sc00077d ↗

67. X. Huang, K. Wang, C. Yi, T. Meng, X. Gong, Efficient perovskite hybrid solar cells by highly electrical conductive PEDOT: PSS hole transport layer. Energy Mater. 6, 1501773 (2016). https://doi.org/10.1002/aenm.20150177310.1002/aenm.201501773 ↗

68. M. Girtan, M. Rusu, Role of ITO and PEDOT:PSS in stability/degradation of polymer: fullerene bulk heterojunction solar cells. Sol. Energy Mater. Sol. Cells 94(3), 446 (2010). https://doi.org/10.1016/j.solmat.2009.10.02610.1016/j.solmat.2009.10.026 ↗

69. M. Jorgensenm, K. Normman, F.C. Krebs, Stability/degradation of polymer solar cells Sol. Energy Mater. Sol. Cells 92, 686 (2008). https://doi.org/10.1016/j.solmat.2008.01.00510.1016/j.solmat.2008.01.005 ↗

70. J. Niu, D. Yang, X. Ren, Z. Yang, Y. Liu, X. Zhu, W. Zhao, S. Liu, Recent advances in flexible perovskite solar cells: fabrication and applications. Org. Elect. 48, 165 (2018). https://doi.org/10.1002/anie.20180978110.1002/anie.201809781 ↗

71. S. Abdelaziz, A. Zekry, A. Shaker, M. Abouelatta, Investigating the performance of formamidinium tin-based perovskite solar cell by SCAPS device simulation. Opt. Mater. 101, 109738 (2020). https://doi.org/10.1016/j.optmat.2020.10973810.1016/j.optmat.2020.109738 ↗

72. H. Du, W. Wang, J. Zhu, Device simulation of lead-free CH3NH3SnI3 perovskite solar cells with high efficiency. Chin. Phys. B 25, 108802 (2016). https://doi.org/10.1088/1674-1056/25/10/10880210.1088/1674-1056/25/10/108802 ↗

73. Z. Zekry, G. Eldallal, Effect of MS contact on the electrical behaviour of solar cells. Solid-State Electron. 31, 91–97 (1988). https://doi.org/10.1016/0038-1101(88)90090-110.1016/0038-1101(88)90090-1 ↗

74. H. Cheng, Y. Feng, Y. Fu, Y. Zheng, Y. Shao, Y. Bai, Understanding and minimizing non-radiative recombination losses in perovskite light-emitting diodes. J. Mater. Chem. C 10, 13590–13610 (2022). https://doi.org/10.1039/D2TC01869A10.1039/D2TC01869A ↗

75. H.I. Abdalmageed, M. Fedawy, M.H. Aly, Effect of absorber layer bandgap of CIGS-based solar cell with (CdS/ZnS) buffer layer. J. Phys. Conf. Ser. 2128, 012009 (2021). https://doi.org/10.1088/1742-6596/2128/1/01200910.1088/1742-6596/2128/1/012009 ↗

76. M.S. Rahman, S. Miah, M.S.W. Marma, T. Sabrina, Simulation-based investigation of inverted planar perovskite solar cell with all-metal oxide inorganic transport layers. Internat. Conf. Elect. Comput. Commun. Eng. (ECCE) (2019). https://doi.org/10.1109/ECACE.2019.867928310.1109/ECACE.2019.8679283 ↗

77. M.M. Shabat, H. Elblbeisi, Unveiling window layer significance in perovskite solar cell performance optimization. Research Square Journal (2023). https://doi.org/10.21203/rs.3.rs-3289721/v110.21203/rs.3.rs-3289721/v1 ↗

78. H. Ferhati, F. AbdelMalek, F. Djeffal, Improved PCE in stable lead-free perovskite solar cells based on band engineering of ETL and absorber. Solar Energy J. (2023). https://doi.org/10.1016/j.solener.2023.11180510.1016/j.solener.2023.111805 ↗

79. N. Touafek, R. Mahamdib, C. Dridic, Boosting the performance of planar inverted perovskite solar cells employing graphene oxide as HTL. Digest J. Nanomater. Biostruct. (2021). https://doi.org/10.15251/DJNB.2021.162.70510.15251/DJNB.2021.162.705 ↗

80. H. Rustan, S. Sudjito, W. Denny, H. Nurkholis, Performance of perovskite solar cell coated with graphene oxide as hole transport layer. Eastern-European J. Enterp. Technol. (2021). https://doi.org/10.15587/1729-4061.2021.22542010.15587/1729-4061.2021.225420 ↗